nedis WCQC302ABK,WCQC302AWT High Speed Wall Charger User Guide
- August 19, 2024
- nedis
Table of Contents
nedis WCQC302ABK,WCQC302AWT High Speed Wall Charger
For more information see the extended manual online:
ned.is/wcqc302abk | ned.is/wcqc302awt
Intended Use
The USB wall charger is intended to charge tablets, smartphones and many other
USB devices, without requiring a PC or notebook. The USB charger converts
voltages from 100 to 240 VAC into 5 VDC / 9 VDC / 12 VDC and is very
convenient at offices, at home or during travels.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and
proper functioning.
Specifications
| Product | High Speed Wall Charger |
|---|---|
| Article number | WCQC302ABK / WCQC302AWT |
| Input voltage | 100 – 240 VAC |
| Input AC frequency | 50/60 Hz / 0.5 A |
| Output voltage | 5.0 VDC / 9.0 VDC / 12.0 VDC |
| Output current | 3.0 A / 2.0 A / 1.5 A |
| Output power | 18.0 W |
| Average active efficiency | 84.37 % |
| Efficiency at low load (10 %) | 77.96 % |
| No-load power consumption | 0.038 W |
Main Parts
(image A)
- USB charging port
Safety Instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to water or moisture.
- Disconnect the product from the power source and other equipment if problems occur.
- Always check that the voltage of the product corresponds to the mains voltage.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
- Unplug the product when your device is charged or if you do not plan on using the product for an extended period of time.
- The power outlet shall be located near the product and shall be easily accessible.
- Never use a damaged or faulty USB cable for charging. This this can damage the product and harm your device.
- Stop the charging process if the product gets too warm.
Using the product
- Connect the charger into the power outlet.
- Insert a USB cable into the USB charging port and the other end to the device you want to charge.
- Unplug the charger when it is not in use.
ned.is/wcqc302abk
ned.is/wcqc302awt
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands –
service@nedis.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>