baseus MC10mini3 Simple Mini 4 Magnetic Wireless Charging Stand User Manual
- August 14, 2024
- Baseus
Table of Contents
baseus MC10mini3 Simple Mini 4 Magnetic Wireless Charging Stand
Baseus Simple Mini 4 Magnetic Wireless Charging Stand Qi2 15W
- Mini 4 Air Qi2 15W
- Simple Mini 4 Qi2 15W
Specifications
- Name: Wireless Charger
- Model: MC10mini3
- Input: 5V=3A; 9V=2.22A; 12V-1.67A
- Output: 15W Max.
- Transmitting frequency: 115-205kHz 360kHz
- Dimensions: 58.6 X 7.3mm
- Weight: Approx. 55g
Accessories
- Wireless charger x 1
- User Manual x 1
- Warranty card x 1
- Emoji sticker x 1
Attention
- Please use a power adapter that conforms to local safety regulations.
- Working temperature: 0°C to 25°C.
- Prohibited from disassembling, impacting, squeezing, or putting in fire.
- Do not place it in a high-temperature environment.
- Prohibited from use after water immersion.
Wireless Charging Warnings
- This product utilizes magnetic and capacitive coupling mechanisms to achieve non-beamforming near-field power transmission from the power source to the load.
- The device complies with relevant regulations such as the “Interim Provisions on Radio Management for Wireless Charging (Power Transmission) Devices,” as well as laws and regulations concerning product quality, electromagnetic radiation, electrical safety, and national standards.
- It is not allowed to change the usage scenarios or conditions, expand the operating frequency range, or increase the transmission power (including adding additional power amplifiers) without permission.
- It is not allowed to cause harmful interference to other legal wireless services and stations. Users cannot request protection against radio interference or radiation interference. If harmful interference to other legal wireless services and stations occurs, immediate use must be stopped, and it can only be resumed after taking measures to eliminate the harmful interference.
- Wireless charging devices are prohibited in this area. The use of a wireless charging function is not allowed.
- If the use of wireless charging devices is causing interference to broadcast services, it should be immediately discontinued.
- The use of wireless charging devices in ships, aircraft, and railway locomotives (including high-speed train units) should comply with this regulation and the relevant regulations of the industry authority.
Customer Service
- 24-Month Warranty
- Lifetime Tech Support
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used under the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The following importer is the responsible party.
- Company Name: BASEUS TECHNOLOGY (US) INC
- Address: 421 S BROOKHURST ST SUITE 1312 ANAHEIM, CA 92804
- Telephone: 6145412699
Declaration of Conformity
Shenzhen Baseus Technology Co., Ltd. declares that the product complies with Directive 2014/53/EU. The full text of the EU declaration of Conformity is available at the following internet address: https://www.eu.baseus.com.
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Follow local rules and never dispose of the product with normal household waste.
- Frequency Range: 110-205kHz,360kHz
- Radiated H-Filed:
- 110-205kHz: -2,88dBuA/m@10m
- 360kHz: -25.61dBuA/m@l0m
Contact Information
- Manufacturer: Shenzhen Baseus Technology Co., Ltd.
- Add: 21d Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen.
- Hotline: 400-071-2711(China)/+1 800 220 8056(Global)
- Website: https://www.baseus.cn (China) /https://www.baseus.com (Global)
- Official After-sales E-mail Address: service@baseus.com (China)/care@baseus.com (Global).
Warning
Please follow the above safety instructions otherwise it will cause fire,
electric shock, damage or other injuries.
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>