sanag S6S Series True Wireless Stereo User Guide

sanag S6S Series True Wireless Stereo

Product Overview

Key Function Operation

• Power on

1. Turn on the earphone in the charging compartment automatically, the ice blue light flashes quickly, the auxiliary ear is turned off after connection, and the main ear light flashes slowly;
2. Hold down the MFB key for 3S to start the system manually.

• Shutdown:

1. Put the headset into the charging bin and close the cover to automatically shut down.
2. Hold down the MFB touch button for about 7 seconds. The ice blue light flashes for 3 times and then turns off.

• Pairing: After the headset is turned on, it automatically enters the pairing state (waiting to be connected with the mobile phone), and the ice blue light of the main ear flashes slowly.
• Answer: When a call comes in, click the MFB touch key of the left and right ears.
• Hang up: During the call, double-click the MFB touch button of the left and right ears.
• Reject: When a call comes in, press the MFB touch key for 2 seconds.
• Play/Pause: Click the left and right ear MFB touch keys.
• Previous: Double click MFB touch button on left ear.
• Next: Double click MFB touch button on right ear.
• Volume plus: Hit left ear MFB touch key three times.
• Volume reduction: hit the right ear MFB touch key three times.
• Voice Assistant: Press and hold the ear MFB touch button for about 3 seconds to release the voice assistant and click to exit.
• Reset headset: When the phone is not connected, press the MFB button of the left and right ears at any time to reset the headset factory Settings, and the ice blue light will turn off automatically after 2 seconds of successful reset.
• Game Mode/Music mode: Hit the MFB button of the left and right ears 4 times to enter the low latency mode, and then switch to the music mode 4 times.
• Low power alarm: When the headset battery is insufficient, it will prompt a low power alarm tone every 3 minutes.
• Charging: Put the headphones into the charging bin, charge the headphones in the bin, and turn off the ice blue light for 4 seconds. The ice blue light in earphone charging is steady on, the full light is off, and the charging bay light is off. Charge the charging bin, charging bin ice blue light flashing, full of ice blue light on.

Bluetooth Operation

Bluetooth connection is successful:

1. The headset enters Bluetooth mode, search for the Bluetooth pairing name ” sanag S65 / sanag S65 Max / sanag S6S Al ” on the mobile phone, and tap Connect.
2. The headset connects to the device once by default.

Bluetooth disconnected:

1. Manually turn off the Bluetooth of the mobile phone, and the headset enters Bluetooth pairing mode.
2. Disconnect the headset from the phone after over-distance, return to the effective distance range within 5 minutes, and connect the phone normally. After 5 minutes, it will automatically shut down.

Specification Parameter

• Name: OWS Bluetooth headset
• Model: sanag S6S / sanag S6S Max / sanag S65 Al
• Bluetooth version: V5.3
• Connection range: ≥10m
• Headphone battery capacity: 40mAh
• Battery capacity: 400mAh
• Charging voltage: 5V 1A MAX

Matters Needing

Matters needing attention

• Do not use abrasive cleaning agents to clean this product.
• Do not allow this product to be heated or near fire sources, such as cooking stoves.
• Do not allow this product to be exposed to direct sunlight for a long time.
• Do not dispose of this product in the fire to avoid explosion.
• Do not attempt to disassemble this product for any modification, as it does not contain any repair components.
• Do not use this product in the rain.
• If you do not intend to use this product for a long time, please store it in a dry environment and arrive every month

Charge your headphones less than once to extend life and avoid extreme temperatures and dust.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution

• Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

RF Exposure Information

• The device has been evaluated to meet general RF exposure requirement.
• The device can be used in portable exposure condition without restriction.

FAQ

Frequently Asked Questions

• Q: What should I do if the device does not turn on?
  • A: Make sure the device is charged properly. If the issue persists, contact customer support for assistance.
• Q: How do I reset the device to factory settings?
  • A: Navigate to the settings menu and look for the option to reset the device. Follow the on-screen instructions to complete the process.
• Q: Can I use the device in extreme temperatures?
  • A: It is recommended to use the device within the specified operating temperature range for optimal performance and longevity.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>