COLMi P28 Plus Smart Bracelet User Manual

COLMi P28 Plus Smart Bracelet

Product Information

Welcome to use our high-performance wrist-band smart bracelet which creates a thoughtful and healthy experience for you.
The smart bracelet features the following functions:

• Steps tracking

• Message notifications

• Sleep monitoring

• Blood pressure measurement

• Blood oxygen measurement

• Sports tracking (walking, running, cycling, rope skipping,
  badminton, basketball, football)

• Weather display

Note : The blood pressure and blood oxygen data are for reference only and should not be used as a basis in medical aspects.

Product Usage Instructions

Power-on
Long press the side button for 3 seconds or plug in the Magnetic line to charge the smart bracelet.

Downloading and Binding of Smart Bracelet APP
Download and install the JYouPro app by scanning the QR code with your mobile phone. For iOS system, select App Store; and for the Android system, select Google Play Store.

Note : Your mobile phone must support Android 5.1 or iOS 8.0 or above, and Bluetooth 4.0 or above.

Binding Smart Bracelet with APP

1. Click on “Scan for device” in the app.
2. Select your device from the scanned device list to bind the smart bracelet.
3. For the iOS system, a Bluetooth pairing request will be shown. Click on “Bluetooth Pairing” to confirm. Connect directly to the Android system.
4. The binding is successful.

Introduction of Smart Bracelet Functions
After the smart bracelet and app are first paired, the time and date of the mobile phone will be synchronized. Press and hold the screen for 2 seconds on the main interface to switch between multiple screen dials.

Steps Tracking
The step-counting interface shows steps. Wear the smart bracelet on your wrist, and it will automatically count steps, distance, and calories.

Message Notifications
You can view the content pushed by messages in the information interface. Up to seven messages can be saved. After seven messages are saved, new messages will replace the displayed ones.

Note : In the information interface, press and hold for 2 seconds to delete the content.

Sleep Monitoring
Wear the smart bracelet at night to automatically judge your sleep state, record deep sleep and light sleep, and summarize the total sleep time to help you monitor your sleep quality. The sensor measures your sleep quality based on wrist movements while you sleep.

Blood Pressure Measurement
To measure blood pressure, ensure a quiet environment and proper temperature. Rest for at least 5 minutes before measurement. Avoid nervous, anxious, and exciting feelings. Measure three times repeatedly with a 2-minute interval. Record the average value of the three readings.

Blood Oxygen Measurement

Blood oxygen saturation (SpO2) is the percentage of oxygenated oxyhemoglobin (HbO2) in the blood compared to the total amount of hemoglobin that can be oxygenated. It indicates the concentration of oxygen in the blood.

Sports Tracking
In the sports interface, you can choose from 7 different sports: walking, running, cycling, rope skipping, badminton, basketball, and football.

Weather Display
The weather page displays the current weather today and tomorrow. Click on the weather interface to view the weather forecast for the next 3 days. The smart bracelet needs to be connected to the client end to retrieve weather data. If there is a long disconnection time, the weather information cannot be updated.

Welcome to our high-performance wristband smart bracelet which creates a thoughtful and healthy experience for you.

Device maintenance

Please remember the following tips when you maintain your smart bracelet:

• Clean the smart bracelet regularly, especially its inner side, and keep it dry.
• Adjust the smart bracelet tightness to ensure air circulation.
• Excessive skincare product should not be used for the wrist wearing the smart bracelet.
• Please cease wearing the smart bracelet in case of skin allergy or any discomfort.

Schematic diagram of the main body of the smart bracelet

Power-on
Long press the side button for 3 seconds or plug in the Magnetic line to charge the smart bracelet.

Downloading and binding of smart bracelet APP

• Download and install APP
• Scan QR code with your mobile phone to download the APP.
• For IOS system, select App Store; and for Android system, select Google Play Store to download and install JYouPro

Note : your mobile phone must support Android 5.1 or IOS 8.0 or above, and Bluetooth 4.0 or above.

Bind smart bracelet with APP

1. Click on “Scan for device” to bind the smart bracelet.
2. Click on your device in the device list scanned.
3. The IOS system will show a Bluetooth pairing request and you can click on Bluetooth “Pairing” to confirm. Connect it directly to the Android system.
4. The binding is successful.

Introduction of smart bracelet functions

Power-on status
switch the menu interfaces of main screen, as the interfaces shown in the following;

Introduction of main interface functions
After the smart bracelet and APP are first paired, the time and date of the mobile phone will be synchronized.
Note : Press and hold the screen for 2 seconds on the main interface to switch between multiple screen dials.

Steps

• The step-counting interface shows steps. Wear the smart bracelet on your wrist, and the smart bracelet can automatically count steps, distance and calories.

Message

• You can view the content pushed by the message in the information interface. At most Seven messages can be saved. After Seven messages are saved, the messages displayed before will be replaced by new messages one by one.
  Note : In the information interface, press and hold for 2 seconds to delete the content.

Sleep

• Wearing the smart bracelet at night to automatically judges whether you are in a sleep state, records deep sleep and light sleep respectively, and summarizes the total sleep time to help you monitor your sleep quality. The sensor can measure your sleep quality according to the range and frequency of wrist movements when you sleep.

Heart rate measurement

• The heart rate measurement interface supports real-time dynamic heart rate and understands your own health data. Be sure that there is no dirt at the bottom of the heart rate sensor when conducting measurement. Skin color, hair density, tattoos and scars may affect the accuracy of the measuring results, in which cases please re-measure the heart rate. Note: The heart rate sensor shall be closely attached to the skin and well in contact with the skin in the measurement of heart rate. The sensor light exposure in case of wearing a bracelet too loosely can result in inaccurate measured figures. Don’t look steadily at the green light of the sensor which may cause eye irritation.

Blood pressure

• The blood pressure shall be measured in a quiet environment and at the proper temperature. Have a rest for at least 5 minutes before measurement. Avoid nervous, anxious, and exciting feelings; measure three times repeatedly at an interval of 2 minutes. Record the average value of readings measured three times.

Blood oxygen

• Blood oxygen saturation (Sp2) is the percentage of the amount of Oxy hemoglobin (Hb2) that has been oxygenated in the blood and the total amount of hemoglobin (H b, hemoglobin) that can be oxygenated. It means the concentration of oxygen in the blood.
  Note : The blood pressure and blood oxygen data are for reference only and should not be used as a basis in medical aspects.

Sport

• There are 7 kinds of sports in the sports interface, including walking, running, cycling, rope skipping, badminton, basketball, and football.

Weather

• The weather page will display the current weather today and tomorrow. Click on the weather interface to display the weather forecast for the next 3 days.
• For weather information, it needs to connect with the client end before data can be obtained. If the disconnection time is long, the weather information cannot be updated.

BRIGHTNESS

• Click the icon to select screen brightness, slide to the right to exit and save the record.

TIMER

• Enter the stopwatch page, click on the icon “Start” below to start timing, then singly click on the icon “Pause” to pause timing, and the icon in the left is for one-key resetting.

Find mobile phone

• Switch to the Find Mobile Phone interface; shake the bracelet, and the mobile phone can make a ringtone synchronically.

Music

• After connecting with the mobile phone, the smart bracelet can control the music player of the mobile phone. When the mobile phone plays music, you can use the smart bracelet to control the mobile phone for playing/pausing, the previous song and the next song.

More

• Click the “More” icon to enter the function interface.

POWER OFF

• Click on “Confirm” to turn off the smart bracelet and the smart bracelet is in a sleep state.

RESET

• Click on “Confirm” to clear all data in the smart bracelet, and to restore factory settings.

Remove device

For the Android mobile phone, the device can be disconnected from your mobile phone by simply clicking on Remove device. For Apple mobile phone after binding removal, you need to click on the symbol on the right in Setting- Bluetooth, and choose to ignore the device. As shown below:

Frequently Asked Questions

(FAQs)

1. Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?

2. Lock the background APP. When the JYouPro process is cleared, the smart bracelet will be disconnected from the mobile phone.

3. Set APP self-startup

4. Unrestricted background operation. The Android mobile phone installed with the APP intelligently restricts the background operation by default, and the App should be set manually without any restriction.

5. Why cannot the smart bracelet receive a message push?

6. Please confirm that you have turned on the switch for message push at the mobile phone client.

7. Please confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the smart bracelet is completed by reading the message from the mobile phone notification bar. The smart bracelet will not receive the message push if there is no message in the mobile phone notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification switch of We Chat, QQ, call, SMS and mobile phoneclient).

8. Turn on the mobile phone — Settings. Enter “Notification use right” on the top search box, and re-open JYouPro.

9. Why can’t take a hot bath with the smart bracelet?
   Answer : the bath water has a relatively high temperature, and generates a lot of vapor which is in the gas phase with a small molecular radius and can easily infiltrate into the smart bracelet from the shell gap. When the temperature drops down, the vapor will condense into liquid-phase droplets which will easily cause a short circuit inside the smart bracelet and damage the circuit board and then damage the smart bracelet.

10. Why is the Bluetooth connecting icon blinking all the time?
    Answer : The user may encounter this problem. It mainly can prompt the users that the pushed message is not received if the APP is not connected with the bracelet. Launch the APP to connect to the bracelet, and the Bluetooth icon can be displayed normally.
    Note : For more frequently asked questions, please refer to the JYouPro APP User Manual

Warning:
Please consult your doctor before you take a new sport. The smart bracelet should not be used for any medical purpose though it may dynamically monitor the heart rate at real time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>