Fanvil H1 Hotel IP Phone Installation Guide
- August 14, 2024
- Fanvil
Table of Contents
H1
Quick Installation Guide
Fanvil Technology Co., Ltd
www.fanvil.com
Precautions
Warning: Please do not power cycle the device during system boot up or
firmware upgrade. You may corrupt firmware images and cause the unit to
malfunction.
Warning: Use only the power adapter included in the device package. Using
an alternative non-qualified power adapter may possibly damage the unit.
Overview
Fanvil H1 is a hotel IP phone with a cost-effective, multi-function, and
elegant appearance. It is equipped with 8 programmable soft keys for the
services hotline, meeting the application requirements of various hotel
scenarios. In addition, H1 supports functions such as HD audio, 10/100Mbps
network port, and integrated PoE, providing a high-quality user experience and
reducing the cost of hotel deployment.
It is more than a hotel phone and also can be applied in multiple scenarios,
such as shopping malls, hospitals, and supermarkets.
Packaging list
Keys description
Device installation
Please follow the instructions in below picture to install the device.
Bracket desktop installation
Wall mounting (wall stand need buy separately)
Connecting to the device
Please connect power adapter, network, and handset to the corresponding ports
as described in below picture.
① Network port: connecting local area network or Internet.
② Power port: connect the power adapter.
③ Handset port: connect IP Phone handset.
Network connect
Using Ethernet
- The power on the device and connect the WAN port of the phone to the RJ45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable.
- The default is DHCP mode.
Phone configuration
Configuration via web
- 1.Get the IP address : Press the “#” key for more than 6 seconds to broadcast IP;
- Login: Input the IP address in the web browser. The PC and phone should be in the same IP address segment (The default username and password are both ‘admin’) ;
- Configure: Select network/account etc, and fill the relevant content ;
- Save the configuration.
Making a call
- Pre-dialing: enter the phone number and pick up the handset.
- Direct dialing: lift the handset and enter the phone number.
- Handsfree: enter phone number and press or vice versa.
- Memory key: press memory key.
Accepting a call
- Using the handset: pick up the handset.
- Using the handsfree: press .
Redial
- Press key, redial a call number.
Note: You can contact your service provider for additional settings that may be necessary to con-figure the phone, or download the user manual and FAQ for more detailed information.
Regulatory Compliance
Federal Communication Commission (FCC) — USA
This device complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received; including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if it is not installed and used in accordance with
the instruction manual, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the bottom of this equipment is a label that contains,
among other information, a product identifier in the format US: 3I1IPNANH1. If
requested, this number must be provided to the telephone company.
Fanvil Technology Co., Ltd
Website: www.fanvil.com
EMail: sales@fanvil.com
support@fanvil.com
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618
Add: 10/F Block A, Dualshine Global Science Innovation Center, Honglang North
2nd Road, Bao’an District, Shenzhen, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>