Bakker Elkhuizen 440-E817 Arm Support for Ergoslider Plus Ergo Instruction Manual
- August 13, 2024
- BAKKER ELKHUIZEN
Table of Contents
Bakker Elkhuizen 440-E817 Arm Support for Ergoslider Plus Ergo
Specifications:
- Product: Arm Support for Ergoslider Plus+
- Content: x1
- Accessory: 440-E817 Desk Bracket
Product Usage Instructions
Decide on the Type of Bracket Configuration:
For Square Tables:
Assemble both brackets at each end position.
Decide on the Type of Bracket Configuration:
For Rounded Tables:
Consider switching the position of one or both brackets to the third
position as shown below.
Third Position:
Verify Table Thickness:
Choose the amount of washers needed for your table thickness.
- If the table thickness = 25 mm:
- Add washer(s)
- Add washer(s)
- If the table thickness < 25 mm
- If the table thickness > 25 mm
FAQ:
-
Q: How do I determine the correct bracket configuration for my table?
A: For square tables, assemble both brackets at each end position. For rounded tables, consider switching the position of one or both brackets to the third position. -
Q: What should I do if my table thickness is less than 25 mm?
A: If your table thickness is less than 25 mm, follow the instructions provided for adding washers accordingly based on your specific table thickness.
DECIDE ON THE TYPE OF BRACKET CONFIGURATION For square tables, go ahead and assemble both brackets as seen below – one bracket at each end positions.
DECIDE ON THE TYPE OF BRACKET CONFIGURATION For rounded tables, re-consider switching position of one or both brackets to the third position seen below.
VERIFY TABLE THICKNESS Choose amount of washers needed for your table thickness.
ACCESSORY
440-E817 Desk Bracket
Documents / Resources
|
Bakker Elkhuizen 440-E817 Arm Support for Ergoslider Plus
Ergo
[pdf] Instruction Manual
440-E817, 440-E817 Arm Support for Ergoslider Plus Ergo, Arm Support for
Ergoslider Plus Ergo, Ergoslider Plus Ergo, Ergo
---|---