Bakker Elkhuizen RB8AFJ-INT BE Flexible Single Monitor Arm Instruction Manual
- June 1, 2024
- BAKKER ELKHUIZEN
Table of Contents
Bakker Elkhuizen RB8AFJ-INT BE Flexible Single Monitor Arm
Product Specifications:
- Material: Support monitor weight
- Fits monitor size: Max. 35 inches
- Fits for tables thickness: Suitable for 5 – 70 mm desktop
- Fits VESA patterns: 75×75 / 100×100
- Screen swivel/horizontal: Yes
- Screen rotation: Yes
- Screen tilt/vertical: Yes
- Arm rotation: Yes
- Height adjustable: Yes
- Extension max: 80 mm
- Installation to desktop: Clamp mounting OR Grommet mounting
- Net weight: Not specified
- Gross weight: Not specified
Product Usage Instructions
Installation and Assembly:
- Read the entire instruction manual thoroughly.
- Identify the appropriate mounting option for your desktop thickness (Clamp or Grommet).
- Ensure the VESA patterns on the monitor arm match those of your monitor.
- Attach the monitor arm securely to the desk using the chosen installation method.
- Adjust the arm height, rotation, swivel, tilt, and extension as needed to fit your desired setup.
Adjusting Monitor Settings:
- Swivel the screen horizontally for optimal viewing angles.
- Rotate the screen to switch between landscape and portrait modes.
- Tilt the screen vertically to reduce glare or improve visibility.
- Rotate the arm to adjust the monitor position as needed.
- Utilize the height adjustment feature to find a comfortable viewing position.
Maintenance and Care:
- Regularly check the stability of the monitor arm attachment to the desk.
- Clean the monitor arm and screen with a soft, dry cloth to remove dust and smudges.
- Avoid placing excessive weight on the monitor arm beyond its specified capacity.
Frequently Asked Questions
Q: What is the maximum weight the monitor arm can support?
A: The monitor arm can support screen weights ranging from 2 to 10 kg.
Q: Can the monitor arm fit larger monitors?
A: The monitor arm is designed to fit monitors up to 35 inches in size.
Q: Is it possible to mount the arm on different desk thicknesses?
A: Yes, the monitor arm is compatible with desktop thicknesses ranging from 5 to 70 mm, with options for clamp or grommet mounting.
SPECIFICATION
- Material: Aluminum Alloy, Steel, Plastic
- Support monitor weight: 2 – 10 kg/4.4 lbs ~ 22 lbs
- Fits monitor size: 17” – 35”
- Fits for tables thickness: 5 – 70 mm
- Fits VESA patterns: 75×75 mm, 100×100 mm
- Screen swive/horizontal: 180°
- Screen rotation: 360°
- Screen tilt/vertical: 180°
- Arm rotation: 360°
- Height adjustable: 126 – 485 mm
- Extension max: 582,3 mm
- Installation to desktop: Clamp or grommet mounting
- Net weight: 2,3 kg
- Gross weight: 3,18 kg
Read the entire instruction manual before starting the installation and assembly. lf there are any questions regarding any of the instructions or warnings, please contact the supplier for assistance.
WARNING: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personla injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items !hal could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Before installation, check that all parts have been received according to the parts checklist. In case of missing or defective parts, contact the supplier for a replacement part..
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every lhree months).
TOOLS
INSTALLATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>