HYUNDAI HY-C8 True Wireless Bluetooth Glasses Instruction Manual
- August 10, 2024
- HYUNDAI
Table of Contents
HYUNDAI HY-C8 True Wireless Bluetooth Glasses
This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Usage Instruction
- Don’t attempt to disassemble the unit and change any part, except if there is an operation method mentioned in the manual.
- Don’t expose the unit to liquid, moisture, or humidity, since it is not a waterproof product.
- Disconnect the unit with your BT device and move it to the safe area if the liquid gets inside the unit.
- Don’t assemble or disassemble the unit to avoid electric shock, if there is water on your hands.
- Don’t expose the unit to extremely high temperatures or dispose of the unit in fire as it will result in an explosion.
- Don’t place the unit in an electromagnetic interference environment to avoid malfunction.
Packing list
Product schematic description
Product specification
- Bluetooth version : V5.4
- Transmission distance :10M
- Battery capacity: 55mAh
- Usage time: approximately9 hours (headphones)
- Charging time: approximately 1 hour (for headphones)
- Rated input: 5V-55mA
LED indicator light status
- Glasses indicator light
- Glasses charging (not fully charged): The red light stays on for a long time
- Fully charged: light off
- Low battery display : Red light flashing
- Power on: Red and blue lights flashing
- Shutdown: The red light stays on for 1 second before turning off
- Pairing in progress: Red and blue lights flashing
- Pairing successful : light off
Product operating instructions
-
Power on
Method 1: Long press and hold the multifunction keys on both mirror legs for 3 seconds to turn on the camera. -
Power off
Method 1: Long press the multifunction button on either leg of the mirror for 6 seconds, and both legs should shut down simultaneously. -
Pairing to the BT device
-
Step 1 : After turning on the left and right mirror legs, they will automatically pair.
-
Step 2 : Open the Bluetooth list of the smart device, search for “HY-C8” and connect.
-
Operation of touch buttons
Glasses operation -
Phone Hands-Free
Glasses operation (under incoming call status) -
Voice Assistant
Glasses operation -
Camera function
Glasses operation
Restore factory settings
After turning on the phone without the pairing state, click the headset
function key 5 times to clear the pairing information and then turn off the
phone.
Name and content of hazardous substances in products
Warranty Service
Dear user, this warranty card is the proof of your future warranty application, please cooperate the seller to fill it out and keep it for future use!
Authorized by Modern Integrated Commercial Holdings Co., Ltd
- Authorized party: Shenzhen Modern Digital Electronics Co., Ltd
- Address : 601A, Chentian R&D Building, No. 50 Baotian Road, Xixiang Street, Bao’an District, Shenzhen
- Manufacturer : Modern Innovation (Shenzhen) Technology Development Co., Ltd
- Address : 1909, Block A, Rongchuang Zhihui Building, Intersection of Longsheng Road and Jinglong Jianshe Road, Shangfen Community, Minzhi Street, Longhua District, Shenzhen
FCC Statement
According to Part 15 of the FCC Rules, this device has been tested to meet the restrictions for Class B digital devices. These restraining decrees provide reasonable protection against harmful disturbances in residential facilities. The device generates and uses radiofrequency energy,lf this instruction is not installed and used in accordance with the regulations, it may cause harmful interference to radio communications. However, there are There is no guarantee that interference will not occur in a particular installation. If this device is built for radio or television reception Into harmful interference, the device can be determined by turning it off and on when the user is encouraged to try to pass through one or Several more measures below
- Redirect or reposition the receiving antenna.
- Increase the distance between the device and the receiver.
- Sockets connected to devices on circuits different from the receiver are connected.
- Please consult a dealer or experienced radio/TV technician for assistance.
This device complies with Part 15 of the FCC Rules. The operation is restricted by the following two conditions
- The device shall not cause harmful interference.
- The device must accept any received interference, including interference that may cause unexpected operation.
Changes or modifications that are not explicitly approved by the compliance responsible party may invalidate the user’s permission to operate the device. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>