rizoma BSFR001 BMW RnineT Scrambler User Manual

Welcome to Rizoma

User Manual   Rev.: 00

– Before you start

We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.

General conditions

  – Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.

Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

1. Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).

2- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.

3-After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.

Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.

Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.

O.E.M.: original equipment manufacturer.

Mounting kit

PART NUMBER

BSFR001

1

| 2

---|---
B439                      [1]| OR2062                 [1]

– Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others. WARNING: TO CLEAN YOUR PRODUCT DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR PRODUCT, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.

DIFFICULTY LEVEL                Simple
TIME OF ASSEMBLAGE      10-15 min

REMOVE COMPONENTS FROM FR060

Step 1

SEPARATE THE TURN SIGNAL FROM THE SUPPORT

1. SUPPORT
2. TURN SIGNAL
3. ATTENTION: REMOVE THE SCREW, THE TEETH WASHER, THE RUBBER AND THE NUT.

INSTALL ADAPTER

Step 2

1. BUSHING
2. SCREW
3. SUPPORT
4. O-RING

INSTALL ADAPTER ON CHASSIS

Step 3

1. DELRIN SPACER
   h=2 mm

2. O-RING

3. SUPPORT
   FR060

4. SCREW

INSTALL FR060 RH SIDE

Step 4

1. SMALL HOUSING
2. THROTTLE GRIP
3. BIG HOUSING
4. SUPPORT
5. DRIVE DIRECTION

ATTENTION: TIGHTENING THE SCREW AND KEEPING THE BIG HOUSING PARALLEL AT THE GROUND AXIS AND POSITIONING IN THE DRIVE POSITION.

INSTALL MIRROR RH SIDE

Step 5

1. O-RING

2. THROTTLE GRIP

3. BUSHING

4. DELRIN SPACER
   h=2 mm

5. 1 mm

6. SCREW

7. SUPPORT
   FR060

8. MIRROR

9. HANDLEBAR

WARNING: FOR THE CORRECT INSTALLATION THE MIRROR CHECK THAT BETWEEN THE THROTTLE GRIP AND THE MIRROR THERE IS ABOUT 1 mm.

WARNINGS INSTALL RH SIDE

Step 6

1. SUPPORT
   FR060

2. THROTTLE GRIP

WARNING: improper installation can cause the throttle to remain open after it is released, resulting in loss of motorcycle control, an accident, personal injury or death. Before riding, open and release the throttle at various positions along its travel to make sure that the throttle operates smoothly and forcefully snaps back to the closed position. If there is any delay or if the throttle remains open, even for an instant, remove and re-install the throttle. See your retailer for assistance or advice.

INSTALL FR060 RH SIDE

Step 7

FOLLOW THE STEPS:
1-INSERT THE WIRES IN THE SCREW;
2-INSERT THE TURN SIGNAL IN THE SUPPORT;
3-TO LOCK ROTATE OF 90° CLOCKWISE THE TURN SIGNAL.

1. SUPPORT
2. SCREW
3. BIG HOUSING
4. LED
5. ELECTRIC WIRES
6. TURN SIGNAL
7. DRIVE DIRECTION

Step 8

1. THROTTLE GRIP
2. TURN SIGNAL
3. LED
4. DRIVE DIRECTION

ATTENTION: ROTATE CLOCKWISE THE TURN SIGNAL. FOR THE RIGHT CLOSING OF TURN SIGNAL MUST HEAR THE CLICK.

INSTALL MIRROR LH SIDE

Step 9

1. SCREW

2. SUPPORT
   FR060

3. BUSHING

4. DELRIN SPACER
   h =2 mm

5. GRIP

6. O-RING

7. HANDLEBAR

8. MIRROR

INSTALL FR060 LH SIDE

Step 10

1. BIG HOUSING
2. SUPPORT
3. LH GRIP
4. SMALL HOUSING
5. DRIVE DIRECTION

ATTENTION: TIGHTENING THE SCREW AND KEEPING THE BIG HOUSING PARALLEL AT THE GROUND AXIS AND POSITIONING IN THE DRIVE POSITION.

Step 11

1. TURN SIGNAL
2. BIG HOUSING
3. SUPPORT
4. SCREW
5. ELECTRIC WIRES
6. LED
7. DRIVE DIRECTION

FOLLOW THE STEPS:
1-INSERT THE WIRES IN THE SCREW;
2-INSERT THE TURN SIGNAL IN THE SUPPORT;
3-TO LOCK ROTATE OF 90° CLOCKWISE THE TURN SIGNAL.

Step 12

1. LED
2. TURN SIGNAL
3. DRIVE DIRECTION

ATTENTION: ROTATE CLOCKWISE THE TURN SIGNAL. FOR THE RIGHT CLOSING OF TURN SIGNAL MUST HEAR THE CLICK.

ORIENTATION TURN SIGNAL

Step 13

1. LH GRIP
2. THROTTLE GRIP
3. TURN SIGNAL
4. LED
5. DRIVE DIRECTION

ATTENTION: MAKE SURE THAT YOUR TURN SIGNAL ARE FITTED IN SUCH A WAY AS TO CAST A BEAM HORIZONTAL TO DIRECTION OF TRAVEL. ORIENTATION IS IMPORTANT TO SAFETY TRAFFIC AND ESSENTIAL TO YOUR BIKES ROADWORTHINESS. IMPROPER MECHANICAL INSTALLATION OR ORIENTATION OF THE TURN SIGNAL MAY INVALIDATE YOUR MOTORBIKE’S ROADWORTHINESS AND INSURANCE PROTECTION, OR EVEN LEAD TO ACCIDENTS. THE MIRROR MUST NOT OBSTRUCT THE VISION OF THE TURN SIGNAL. FOR THE ELECTRIC CONNECTIONS CONSULT THE INSTRUCTIONS MOUNTING OF THE TURN SIGNAL FR060.

Warnings

– RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.

The action depicted is performed by professionals under strictly controlled riding conditions.

Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.

All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.

Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.

Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

Legal notes

– Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.

References

• Home - Rizoma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>