savio Bluetooth Speaker User Manual
- June 6, 2024
- Savio
Table of Contents
User manual
Thank you for choosing our product!
If our product meets your expectations, share your opinion with other people
on the portal ceneo.pl, on social media, or on the website
of the store where you made the purchase. If you want to show off our device
on Savio.net.pl FanPage on Facebook, we will be very pleased.
If there is something that we could improve on our products, please write to
us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the product to your
expectations.
-
Package content
– Bluetooth speaker Savio BS-021/BS-022/BS-023
– Charging USB(M) – micro USB(M) cable
– Silicone handle
– User manual -
Product Scheme:
Before starting the use of the purchased device it is recommended to read the whole manual.
1.
Silicone handle
2. Power ON/OF switch
3. Charging socket
4. Memory card slot
5. USB input
6. AUX connector -
Buttons description:
M Mode switch button:
– a single press of the button change modes: Bluetooth – FM Radio – Micro SD Card – USB – AUX
– Volume regulation/track change button:
– single press: previous track
– pressing and holding: lowering the volume
+ Volume regulation/track change button:
– single press: next track
– pressing and holding: increasing the volume
> Play/Pause Button:
– single press while playing music: pausing/playing a track
– single press while incoming call: receiving the call
– single press while calling: disconnecting the call
– pressing and holding while incoming call: rejecting the call
– pressing and holding: unpairing the speaker with a device(i.e. smartphone) -
Modes description
4.1 Bluetooth mode (Playing music from a Bluetooth source mode)
To run the Bluetooth mode
a) Turn on the speaker(device starts as default in Bluetooth mode and signalize this with the statement: ”Bluetooth device is ready to pair”).
b) Turn on the Bluetooth in the device(i.e. smartphone).
c) Choose from the list of available devices speaker „Savio BS-02”. After successful pairing, it will be confirmed with the statement: „Connected successfully”
4.2 FM Radio mode (radio station receiving mode) Start the FM Radio mode by:
a) Turn on the speaker.
b) Press M the button, to go to FM radio mode. When that mode is on, the speaker will confirm it with the statement: “Radio mode”.
c) Automatic search for the radio stations can start by pressing and holding the button for 3 seconds. In the automatic search of the available range of frequencies, the speaker will scan them and will save founded stations to the memory.
d) Another press of > a button during the automatic search of stations will stop the search.
e) After a full search of all the radio frequencies, the speaker will start to broadcast the first radio station, that was found and saved.
f) Pressing the + or – button will connect the speaker with the next or previous radio station.
g) Pressing the > button will turn off the FM radio mode
Attention:
To enhance the signal of the received radio station, before turning on the radio mode, connect the Jack 3.5mm cable to the AUX socket.
4.3 USB/Micro SD mode (external source playback mode)
Run the USB/Micro SD mode by:
a) Turn on the speaker.
b) Put the USB or Micro SD card to the right speaker slot. The source will be detected automatically.
It will be confirmed with the statement: “music mode” and the playback from a USB or Micro SD will start.
c) In the situation when there is a Micro SD card in the slot and the speaker is in a different playback mode, to change the playback mode, not playback from external sources the button M should be pressed.
4.4 AUX mode (enables playback by Jack 3.5mm cable)
a) Turn on the speaker.
b) Connect the device(i.e. laptop) by Jack 3.5mm cable to the AUX socket in the speaker. The source will be automatically detected. It will be confirmed with the statement: ”AUX mode” and the speaker will be ready for playback.
c) In the situation when a device is connected to the AUX socket and the speaker is in a different playback mode, changing the mode to playback through AUX will be made by pressing the M button -
Charging:
To start the charging:
5.1 Connect the USB cable to the socket in the speaker.
5.2 The diode over the charging connector start to backlit in red color indicating that the speaker is being charged.
5.3 When the device will be fully charged, the diode will go dark.
Attention:
When the battery level is low the device will indicate that with the statement: ”low battery”. In case of full battery depletion, the device will turn off and indicate it with the statement „Power off”. -
Connections(Loudspeaker mode)
6.1 Incoming calls:
a) When the speaker is connected to the smartphone, it indicates the incoming call with the statement: „incoming call”. To receive incoming calls press thebutton.
b) To reject the incoming call press and hold the > button for 3 seconds.
6.2 Outgoing call:
a) To start the conversation in the loudspeaker mode, connect the speaker with the smartphone(point 4.1).
Then choose the number with the smartphone and start the call. -
Specification:
– Bluetooth version: v4.0+EDR
– Output power: 2x5W
– Bluetooth range: up to 10m
– Impedance: 3Ω
– Battery capacity: 1200mAh
– Voltage: DC 5V
– SNR: ≥80dB
– Maximal loudness ≥ 90dB
– Frequency range: 120Hz – 20kHz
– Maximal SD memory card capacity: 32GB
– FM Radio frequency range: 87,5MHz – 108.0MHz
– Working time: up to 7 hours (depending on the volume level)
– Charging time: 2.5 hours
– Dimensions: 230x85x88mm
– Weight: 700g
Attention:
– Do not listen to loud music for a long period of time,because it may result in hearing loss
– If the playback error will occur, immediately turn off the speaker and disconnect all the devices and cables to prevent the speaker and other components from damage
– Protect the speaker from water and humidity
– Do not drop the speaker from a height
– Do not use the speaker in dusted places
Information for customers and contractors and communication regarding complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection
Regulation (EU) 2016/679 of the European Parliament and of the Council of 27
April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp.
z o.o., with its registered seat at ul. Morga 81; 35-323 Rzeszów becomes the
Administrator of your personal data. The Specialist for General Data
Protection (SODO) can be contacted in writing to SODO, Elmak Sp. z o.o., ul.
Morga 81; 35-323 Rzeszów, via e-mail address:
sodo@elmak.pl, and by phone at +48 (17) 854 98 14.
Your personal data will be processed in order to perform the contract, in
accordance with Article 6(1)(b) of the aforementioned regulation, to the
extent resulting from tax laws and financial regulations. Recipients of your
personal data include entities authorized by legal regulations to obtain
personal data as well as processing entities providing services to Elmak Sp. z
o.o. our personal data will be stored on the basis of the Administrator’s
legitimate interest. You have the right to access your data, and the right to
rectify, delete or limit the processing of your data. You have the right to
lodge a complaint to the supervisory body if you believe that the processing
violates the GDPR. The provision of personal data is voluntary, however, a
failure to provide such data may result in a refusal to conclude or in
termination of a contract. Your personal data will not be subjected to
automated decision-making, including the profiling referred to in Article 22
section 1 and 4 of the GDPR of April 27, 2016.
RoHS
Producent:
Elmak Sp. z o.o.
Ul. Morgowa 81, 35-323 Rzeszów
www.elmak.pl,
www.savio.net.pl
This symbol means that in accordance with European Union directive 2012/12EU, electrical and electronic equipment should not be disposed of with other household waste. The equipment should be sent to a local collection point for this type of waste or to a recycling center. Please contact your local authority for information on available disposal methods. Importer disposal of waste is threatened by the penalties provided for by law in force in the given area. Proper disposal of equipment will help to avoid the negative effects that threaten the environment and human health, in the event of improper utilization.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>