sanag S3 Pro Smart Screen Bluetooth Earphones Instruction Manual

sang S3 Pro Smart Screen Bluetooth Earphones

Product Overview

1. Headphone indicator
2. Touch the key
3. Smart warehouse display
4. Smart bin boot button
5. Charging port

This product includes two Bluetooth devices

Bluetooth headset device name

Bluetooth headset connects to APP

1. Open the smart compartment, and the headset will turn on automatically.
2. APP click Add or drop-down interface to select device name, connect, and match. factory data reset
   If the phone is not connected when the phone is turned on, the MFB button on the ear can be used any 5 times to reset the factory Settings of the headset (Clear the pairing information with the phone), the reset is successful, and the ice blue light is on for 2 seconds and shut down.

Power button

1. Earphones on/off : Smart bin open cover earphones automatically turn on; The phone automatically shuts down after 5 minutes without connection.
2. Headset manual turn on/off : Manually press the headset touch button for 35 to turn on; Press and hold 7S to power off manually.
3. TWS pairing success: After the headset is turned on, the pair will be automatically set
   The ice blue light of the main ear will flash, and that of the secondary ear will flash No lights. The phone is connected successfully.
   The indicator is off.

In the shutdown state, long press the 35 startup button to start the smart warehouse.

Wear

Remove the earphones and place them in the middle of the ear Put in the headset and finish wearing it.

Call

• Play/Pause : Click
• Previous: Double-click on the left ear
• Next: Double dick on the right ear
• Volume reduction: Right ear 3 hits
• Volume increase: left ear 3 hits

Voice Assistant

Long press 3S with left/right ear (click Exit) Wake up the voice assistant

Intelligent bin operation

Long press 35 to enter the multi-dial function, slide down to enter the shortcut screen, left slide to enter the function list screen, and right slide to enter the weather screen.

Function Selection

1. Hold down 3S to enter the multi-dial function, slide down to enter the status display bar, and slide left to enter the Function list interface, right slide to enter the weather interface.

2. In the dynamic expression desktop, you can dick the screen to interact, dick, double click, three dicks, Swipe up, you get different expressions.

3. If the APP is connected to the smart bin, the icon will appear blue, while the icon that is not connected will appear wwhite

4. Take out the headset, the headset is automatically connected to the smart compartment, the icon is blue, and the icon that is not connected is white.

5. Left ear power display.

6. Right ear power display.

7. Intelligert storage power display.

Installed App

1. Mobile browser scan QR code pop-up download method, Download and install the sang APP (APP)IOS 8.0 or Android 4.4 or later.
2. Log in to the APP, select the headset device to connect, and follow the connection prompts. When the connection prompt appears on the screen, click “Complete connection”.

Smart Warehouse connection APP

Click Add or drop-down screen to search for Smart warehouse device name sang S3 Pro-B / sang S3 Pro AI-B

Mobile phone Bluetooth-connected headset

1. After the APP is connected to the warehouse, the Bluetooth connection prompt will pop up automatically.
2. You can also directly search for the pairing name of Bluetooth “sanag S3 Pro/sanag S3 Pro Al” on the Bluetooth page of your phone.

Headset function interface

Weather/dial function

APP interface

1.  Click to access the connected device Select more dials.
2. Click more topics to enter the Custom Dial interface.
3. Select a picture to customize the watch face.

Weather: The day can be displayed after connecting to the APP Weather information.

Product Parameter

• Name: Bluetooth headset
• Model: sanag S3 Pro / sanag S3 Pro Al
• Bluetooth version: V 5.3
• The voltage of charge : 5V === 1A MAX
• Headphone battery capacity: 40mAh
• Battery capacity: 400mAh

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

This wants to eat 15 behe teste as Te eliminate designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>