PROFECO 77449 Cordless Electric Screwdriver Instruction Manual
- June 3, 2024
- Profeco
Table of Contents
PROFECO 77449 Cordless Electric Screwdriver
Controls and components:
Pistol screwdriver:
- Tensioning head without key
- LED light
- Conversion button
- Charging port
- Forward/reverse switch
Charging the battery:
- Place the unit on a clean and dry surface within 1 metre of a 110- 240V (AC) / 50HZ / 60HZ wall socket.
- Plug the AC adaptor into the charging port on the side of the device.
- Plug the AC adaptor into the wall socket.
- Allow 2 to 3 hours for the battery to fully charge.
- After charging, disconnect the device and the device should be ready for use.
- The LED battery level indicator should tell you how much charge the battery has left.
Operation:
- Insert the bit into the chuck until it clicks into place.
- Grasp the tool firmly with both hands, align the bit with the screw and press it firmly into the screw.
- Start the tool by pressing the forward/reverse trigger switch. (*Press the top of the switch to turn the screw forward, press the bottom of the switch to turn the screw backwards).
Tips for troubleshooting:
- Press the LED battery level indicator and check that the unit is fully charged.
Maintenance:
- Use only mild soap and a damp cloth to clean the appliance.
- Do not allow liquids to enter the tool.
- Do not immerse any part of the tool in liquids.
Specifications:
- Pistol screwdriver:
- Voltage: 3.6 volts (DC)
- Torque: 3 Nm.
- Speed (no load): 220 RPM/Min
- AC adaptor:
- Input: 110-240 volts (AC) / 50 Hz / 60 Hz
- Output: 5/6 Volt (DC) / 300-400 mA
- Charging time: 2-3 hours (max 7 hours)
- LpA: 63 dB(A)
- LwA: 74 dB(A)
- Vibration: 2.5 m/s2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>