Profeco 77402/77403 Bouwstofzuiger (RVS)1200W – 15 Liter Instruction Manual

June 5, 2024
Profeco

Profeco LOGO Bouwstofzuiger (RVS) 1200W
77402/77403
Instruction manual
Profeco 7740277403 Bouwstofzuiger \(RVS\)1200W 15 Liter
Instruction

77402/77403 Bouwstofzuiger (RVS)1200W – 15 Liter

Please note:
Before cleaning or servicing the unit, unplug it from the main supply.

  • Note: Read the operating instructions carefully before installation and commissioning.
  • Check whether the mains voltage corresponds to the data on the rating plate.
  • Only connect to a 220-240 volt, 50Hz socket.
  • Remove the plug from the socket when: the appliance is not in use, before opening the appliance, for cleaning and maintenance.
  • Never clean with solvents.
  • Do not pull on the cable to unplug, but pull on the head.
  • When the appliance is ready for use, do not leave it unattended.
  • Keep out of reach of children.
  • Avoid damaging the power cord by driving over it, crushing it, stretching it, etc.
  • The device must not be used if the mains connection cable is not in perfect condition.
  • Do not, under any circumstances, vacuum up: burning matches, glowing ash, cigarette butts, flammable, corrosive, flammable, or explosive substances, vapors, and liquids.
  • This device is not suitable for picking up dust that is harmful to health.
  • Store the device in a dry place.
  • Do not use the device if it is defective.
  • Use the device only for its intended purpose.
  • Be very careful when cleaning stairs.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.

Technical specifications:

Profeco 7740277403 Bouwstofzuiger \(RVS\)1200W 15 Liter Instruction - FIG
1

Supplied items:

  1. Handle
  2. ON/OFF switch
  3. Hose
  4. Vacuum cleaner tube
  5. Plug
  6. Collection tray
  7. Floor nozzle
  8. Crevice nozzle
  9. Wheels

Overview of nozzles

Assembly

Please note:
Figure 6a: Use the supplied foam filter for wet vacuuming.
Figure 6b: Use the supplied dust bag for dry vacuuming.

Wet vacuum – cleaning

Disconnect the power supply before replacing the filter (Figure 1).
Pull the supplied foam filter over the filter basket (figure 2) for wet vacuuming.
Insert the plug into the socket and turn the switch on, and the device will start to work (Figures 4 & 5a or 5b).

Dry vacuum – cleaning

Unplug the power cord before replacing the filter (Figure 1), then remove the bag and empty the dust or replace the bag.
Slide the dust bag onto the connection (Figure 2) for dry vacuum cleaning.
Insert the plug into the socket and turn the switch on, and the device will start to work (Figures 5 & 6a or 6b).

Maintenance – cleaning

Unplug the power cord before servicing (Figure 1).
Remove the foam filter (Figure 3), and wash it with water (Figure 5).
IMPORTANT:
Do not use detergents to clean the filter. The filter must be thoroughly dry before use.

Proper disposal of this product.

This marking indicates that this product may not be disposed of with other household waste throughout the EU. In order to prevent possible harm to the environment or human health from uncontrolled waste disposal, waste must be recycled responsibly in order to promote the sustainable re-use of material resources.

Warranty information

The manufacturer provides a warranty in accordance with the laws of the customer’s own country, with a minimum of one year from the date the appliance was sold to the end-user. The warranty only covers defects in material or workmanship. When submitting a warranty claim, the original purchase invoice (with purchase date) must be submitted.
The guarantee does not apply in cases of:
– Normal wear and tear.
– Improper use, e.g. overloading the device, use of non-approved accessories.
-Use of force, damage caused by external influences.
– Damage caused by non-compliance with the operating instructions, e.g. by connection to an unsuitable power supply or by non-compliance with the installation instructions.
– Partially or fully dismantled devices.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Profeco User Manuals

Related Manuals