nedis DOORB310BK Wireless Doorbell With Sound and LED Light User Guide
- August 9, 2024
- nedis
Table of Contents
nedis DOORB310BK Wireless Doorbell With Sound and LED Light
Product Information
Specifications :
- Product: Wireless Doorbell
- Models: DOORB310BK / DOORB310BK2 / DOORB310BK3
- Battery: 23A, 12V
- Intended Use: Residential use, not for professional use
Product Usage Instructions
Safety Instructions :
Installing the Battery:
- Use a screwdriver to carefully pry the doorbell open.
- Insert 1 23A 12V battery.
- Close the doorbell.
- Replace the battery every 12-18 months to maintain optimal performance.
Pairing a Wireless Doorbell to the Chime:
- Plug the chime into a power outlet.
- Select a ringtone by pressing the back button or forward button on the chime.
- Enter pairing mode by pressing and holding the volume control button for 5 seconds.
- Press the button on the doorbell to pair with the chime. A sound will confirm successful pairing.
- Repeat the pairing process for each additional doorbell.
Mounting the Product:
- Use the adhesive tape or screws to mount the mounting plate.
- Attach the doorbell to the mounting plate.
- Avoid outdoor mounting without shelter to maintain product lifespan.
- Avoid mounting on metal surfaces to optimize operating range.
Disposal :
The product should be disposed of at an appropriate collection point. Do not
dispose of it with household waste. Contact the retailer or local waste
management authority for proper disposal instructions.
Frequently Asked Questions (FAQ):
-
Q: How often should I replace the battery?
A: It is recommended to replace the 23A 12V battery every 12-18 months to ensure optimal performance and operating range. -
Q: Can I use the wireless doorbell for professional purposes?
A: No, this product is intended for residential use only and should not be used for professional applications.
Wireless doorbell
With sound and LED light
DOORB310BK | DOORB310BK2 | DOORB310BK3
Nedis Limited
Prebend House, 72 London Rd, Leicester Le2 0QR
United Kingdom
service@nedis.com
Quick start guide
Wireless doorbell
For more information see the extended manual online:
ned.is/doorb310bk
Intended use
- This product is a wireless doorbell with a 23A battery, that can be used with multiple chimes.
- Any modification of the product may have consequences for safety, warranty and proper functioning.
- The product is not intended for professional use
Main parts (image A)
- Wireless doorbell
- LED indicator / button
- Chime*
- Volume control button
- Back button
- Forward button
- LED indicator
- Double-sided adhesive tape
- Mounting plate
- 23A Battery
- Screw
- 1x for DOORB310BK, 2x for DOORB310BK2, 3x for DOORB310BK3
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not open the product, there are no user serviceable parts inside.
- Do not immerse the product in water or other liquids.
- Do not expose the product to water, rain, moisture, or high humidity.
- Disconnect the product from the power source before cleaning.
- Disconnect the product from the power source before service and when replacing parts.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
- Do not drop the product and avoid bumping.
- Do not use aggressive chemical cleaning agents when cleaning the product.
- Store the product in a dry place away from sunlight and protect it against excessive dust and dirt.
- Chemical burns hazard:
- Do not subject cells or batteries to mechanical shock.
- Do not dismantle, open or shred secondary cells or batteries.
- Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
- In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
- Only use the battery type(s) recommended in this document.
- Make sure the batteries are clean and dry before installation.
- Retain the original product literature for future reference.
- When possible, remove the battery from the product when not in use.
- Do not remove a cell or battery from the original packaging until required for use.
- Do not use any cell or battery that is not designed for use with the product.
- Use only the cell or battery in the application for which it was intended.
- Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
- Battery usage by children should be supervised.
- Only power the product with the voltage corresponding to the markings on the product.
- Wipe the battery terminals with a clean dry cloth if they are dirty.
- Non-rechargeable batteries are not to be recharged.
- Do not short-circuit a battery.
- Children of less than 8 years should be kept away.
- Cleaning and user maintenance shall not be done by children without supervision.
- Make sure to match the (+) and (-) polarity markings.
- Do not clean the inside of the product.
- Rechargeable cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
- For more detailed information about disposal of your old battery, check the local rules and regulations for the correct disposal instructions.
Installing the battery
- Use a screwdriver to carefully pry the doorbell A1 open.
- Insert 1 23A 12V battery Aq.
- Close the doorbell A1.
- Weak batteries will reduce the operating range. Replace the battery every 12- 18 months.
Pairing a wireless doorbell to the chime
-
Plug the chime A3 into a power outlet.
-
Press the back button A5 or the forward button A6 on the chime A3 to select a ringtone.
-
Press and hold the volume control button A4 for 5 seconds to enter pairing mode. The LED indicator A7 will blink and the chime A3 will play a sound.
The product exits pairing mode after 5 seconds of inactivity. -
Press the button A2 on the doorbell A1 to pair with the chime A3. A chime sounds to indicate that pairing is successful.
-
Repeat steps 3 and 4 for each doorbell.
Mounting the product
- Mounting the product outdoors without any shelter can decrease the lifespan of the product.
- Mounting the product onto metal surfaces can decrease the operating range.
- Use the adhesive tape A8 or screws Aw to mount the mounting plate A9.
- Attach the doorbell A1 to the mounting plate A9.
Resetting the product
- Press the forward button A 6 for 5 seconds to reset the chime A 3 . The LED indicator A 7 will blink and the chime A 3 will play a sound. The ringtone of chime A3 will reset to default.
- The doorbell A1 will be disconnected from the chime A3.
Disposal
- The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
- For more information, contact the retailer or the local authority responsible for the waste management.
Declaration of Conformity
- We, Nedis B.V. declare as manufacturer that the product DOORB310BK / DOORB310BK2 / DOORB310BK3 from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
- The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/DOORB310BK#support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>