INFINITY 150.467UK Flying Strobe Moving Head User Manual

: August 8, 2024
: Infinity

Table of Contents

INFINITY 150.467UK Flying Strobe Moving Head
INTRODUCTION
In the box
Placement
Cleaning
Rear panel and control
Specifications
Troubleshooting
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INFINITY 150.467UK Flying Strobe Moving Head

INTRODUCTION

A mesmerizing moving head comprising 2 panels of 250 bright RGB LEDs which combine with infinite Pan and tilt movement to provide room-filling effects from any position. The unit can be operated on show mode, sound-to-light or by DMX and can be free-standing or mounted to trussing using the supplied fixing bracket. Ideal as a feature light in bars, nightclubs, and functions, the Infinity moving head offers endless possibilities.

In the box

Infinity should arrive with you in a single carton in good condition. The carton should contain 1 x main unit with brackets, 1 x UK twist, and lock mains lead, and 1 x manual.
Warning:
To prevent the risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before continuing use.

Placement

Use the included mounting brackets to fix to a stand or lighting truss.
Use secondary safety fixings if mounting overhead.
Keep away from damp or dusty environments.
Ensure adequate airflow around the fixture housings.
Ensure adequate access to controls and connections.
Do not aim LED output directly into line of sight, as this can result in eye injury.

Cleaning

Use a soft cloth with a neutral detergent to clean the casing as required.
Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
Do not use strong solvents for cleaning the unit.

Rear panel and control

LCD display
Up button
Enter button
Menu button
Down button
Power switch
Power input (twist and lock)
Power output (twist and lock)
DMX input
DMX output
Fuse

Manual control menu
Press the “MENU” button to enter the settings menu. Press the “UP” and “DOWN” buttons to navigate through various setting functions. Press the “ENTER” button to confirm the desired setting:

DMX mode:
Infinity can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct start address by using the “UP” and “DOWN” buttons and “ENTER”. The A on the LED display will begin to flash once it’s received the DMX signal from the controller. This unit has either 12, 15 or 19 DMX channels as indicated in the table below:

12 Channel:
15 Channel:
19 Channel:

Specifications

Power supply	110-240Vac, 50/60Hz (IEC)
Power consumption	140W
Fuse rating	F5A
LED power	500 x 0.2W-RGB strobe
Modes	Show mode, sound, master/slave, DMX512
DMX channels	12, 15 and 19CH
Beam angle	70°
Pan range	360° infinite
Tilt range	360° infinite
Connections	Power in/out (twist and lock), DMX in/out (3pin XLR)
Dimensions	180 x 270 x 540mm
Weight	7.85kg

Troubleshooting

No power (mains)

| Check mains voltage is correct and outlet is switched on
---|---
Check mains lead and fuse (if fuse continually blows, refer to your dealer)

No light output

| Check control panel mode settings
Check DMX settings from the controller (dimmer levels, blackout, etc.)

Unresponsive to DMX

| Check that the unit is in DMX mode and ensure the A on the DMX address flashes to confirm it’s receiving a DMX signal
Check DMX controller is not set to black out
Check DMX controller is on the correct fixture/page
Check the master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/Cutting out| Ensure adequate ventilation and the unit is not too close to a heat source

This product is classed as Electrical or Electronic equipment and should not be disposed of with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.