Baseus C02 Mega Magnetic Wireless Charging Car Mount User Manual

: August 6, 2024
: Baseus

Table of Contents

Baseus C02 Mega Magnetic Wireless Charging Car Mount User Manual
- Product Parameters
Installation Instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Baseus C02 Mega Magnetic Wireless Charging Car Mount User Manual

Baseus-C02-Mega-Magnetic-Wireless-Charging-Car-Mount-
PRODUCT

Before using the product, thoroughly read this manual. Keep the manual for future reference.

Product Parameters

Name : Baseus PrimeTrip Series C02 Mega Magnetic Wireless Charging Car Mount
Model : BS-CM042
Product materials: manganese steel + PU leather + silicone
Input : 9V-2.5A (Max.)
Wireless output: 5W/7.5/15W
Total power: 15W
Use scenarios: center console/dashboard, etc.
Applicable vehicle models: suitable for all vehicle models
Accessories : gel replacement x 1, magnetic ring x 1, magnetic ring sticker X 1,M alcohol pad X 1, A-C charging cable X 1, C-C charging cable X 1

Installation Instructions

Recommended use scenarios: center console/dashboard

Before pasting, please wipe the surface to be pasted with an alcohol pad and keep it dry and clean.
Remove the protective film from the gel-backed adhesive, stick the base onto the center console/dashboard, ensure that the soft base is in full contact with the bonding surface, and keep it stand for 24 hours before using.
Before use, bend the handle of the bracket to adjust it to the appropriate angle and position

Baseus-C02-Mega-Magnetic-Wireless-Charging-Car-Mount-
FIG-1

Precautions

This product is suitable for iPhone 12 and above. For iPhone 12 and below, and Android phones, please use a magnetic ring.
Using a case will affect the magnetic force. The magnetic ring can be attached to the surface of the phone case for use
Before installation, please keep the surface to be adhered dry and clean.
After applying the gel, please keep it stand for 24 hours before using.
The bracket handle supports over 1000 bends; please avoid multiple bends in a short period of time.
The handle shaft has a certain angle limit for bending; please do not force it to bend.

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Follow local rules and never dispose of the product or batteries with regular household waste.

Shenzhen Baseus Technology Co., Ltd.

https://eu.baseus.com/pages/euro-compliance

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interterence, and
This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Manufacturer : Shenzhen Baseus Technology Co., Ltd.
Add : 21d Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Hotline : 400-071-2711(China) / +1 800 220 8056(Global)
Website : https://www.baseus.cn(China) /https://www.baseus.com(Global)
Official After-sales E-mail Address:service@baseus.com (China) / care@baseus.com (Global)