IQOS H197235 ILUMA PRIME Mobility Kit User Manual
- June 9, 2024
- IQOS
Table of Contents
For the full user guide, Customer Care and Extended support services for IQOS users , visit www.iqos.com/myiqos
Getting Started
TURN ON
Press and hold Pocket Charger Button for 4 seconds, then release; Pocket
Charger Status Lights and Holder Status Lights will turn on slowly.
CHARGE HOLDER
Insert Holder into the Pocket Charger, then close Wrap to charge.
Holder Status Light will show Holder battery level.
CHARGE POCKET CHARGER
Before first use, fully charge your device with Power Adaptor and Charging
Cable. (approx. 135 min)
How to use your IQOS ILUMA PRIME™
1. INSERT SPECIFICALLY DESIGNED TOBACCO STICK
Insert the specifically designed tobacco stick to the line on filter until
Holder vibrates and Light(s) pulse(s).
Heating starts automatically, or by pressing Button for 1 second.
2. BEGIN USE
Start using once Holder vibrates and Lights stay fixed.
3. NEARLY COMPLETE
To signal the last 30 seconds or last 2 puffs, Holder will vibrate with
Light(s) pulsing white.
4. REMOVE SPECIFICALLY DESIGNED TOBACCO STICK
Remove used specifically designed tobacco stick and dispose as per Safety
Warnings and Instructions.
5. RECHARGE HOLDER
Insert the Holder in the Charger for recharging.
Quick Tips
CHECK HOLDER STATUS
Tilt Holder towards you or short press Button, Holder Lights indicate Holder
battery level.
CHECK HOLDER STATUS ON THE POCKET CHARGER
Short press Pocket Charger Button. Holder Status Light will turn on.
CHECK POCKET CHARGER STATUS
Short press Pocket Charger Button. Pocket Charger Status Lights will turn on
to indicate battery level.
AUTOSTOP
During use, the experience will stop if the specifically designed tobacco
stick is moved, or removed from the Holder.
IQOS ILUMA PRIME™ POCKET CHARGER
1. Holder Status Lights
2. Pocket Charger Status Lights
3. Wrap
4. Pocket Charger Button
IQOS ILUMA™ HOLDER
5. Charging Port
6. Ring
7. Holder Status Lights
8. Holder Button
IQOS ILUMA™ is compatible only with SPECIFICALLY DESIGNED TOBACCO STICKS
Charging Cable Power Adaptor
LIGHT BLINKS YELLOW
Battery depleted, need to charge.
LIGHTS BLINK WHITE TWICE
IQOS ILUMA PRIME™ is outside operating temperature range (0°C~40°C).
LIGHT BLINKS RED
Reset Pocket Charger. If red light blinking persists, contact Customer Care.
TO RESET
Place Holder in Pocket Charger and press Button for 10 seconds then release.
All Status Lights will turn OFF, and turn ON, to confirm a RESET.
FEATURES AND SETTINGS
Can be turned on or off with the IQOS app*.
Please register by scanning QR code or log in on www.iqos.com/iluma and follow the instructions.
- IQOS app may not be available in your country.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>