Amico 3-23-000607 RGB Wall Mounted Touch Controller Installation Guide
- June 6, 2024
- Amico
Table of Contents
Amico 3-23-000607 RGB Wall Mounted Touch Controller
Important Safety Instructions
When using electrical equipment, basic safety precautions should always be followed including the following:
Read And Follow All Safety Instructions
- Warning: This product must be installed in accordance with the NEC or your local electrical code. If you are not familiar with these codes and requirements, consult a qualified electrician.
- Warning: This equipment is not for use in hazardous combustible atmospheres as defined by the National Electrical Code.
- Danger: Risk of shock – Disconnect power before installation.
Installation
-
Step 1:
Turn off the main power supply. -
Step 2:
Remove the faceplate by removing the two screws as shown in Diagram 1. -
Step 3:
Attach the backplate to the installed junction box as shown in Diagram 2. -
Step 4:
Connect the plug as shown in Diagram 3. -
Step 5:
Attach the faceplate as shown in Diagram 4. -
Step 6:
Complete the electrical connections as shown in the Electrical Connections Section.
Electrical Connections
Step 1:
Make the following connections as shown in Diagram 5.
Directive 2012/19/EU (WEEE – Waste Electrical and Electronic Equipment):
Information for Users
This product complies with EU Directive 2012/19/EU. The crossed-out wheeled
bin symbol on the article means that at the end of its useful lifespan, this
product must not be disposed of with your other household or municipal waste.
This product has required the extraction and use of natural resources for its
production. It may contain hazardous substances that could impact health and
the environment if not properly disposed of. In order to avoid dissemination
of those substances in our environment and to diminish the pressure on the
natural resources, the user is responsible for delivering the appliance to an
appropriate collection facility at the end of its useful lifespan. The
separate collection and recycling of your waste equipment at the time of
disposal will help conserve natural resources and ensure that it is recycled
in a manner that protects human health and the environment. For more
information on the available collection, facilities contact your local waste
collection service or the place of purchase. Amico Lights Corporation | 122-B
East Beaver Creek Road, Richmond Hill, ON L4B 1G6, Canada | www.amico.com
Toll Free Tel: 1.877.462.6426 | Toll Free
Fax:1.866.440.4986 | Tel: 905.764.0800 | Fax: 905.764.0862