COMMSCOPE 100G-SR4 Arista Network Cabling Solutions User Guide
- May 15, 2024
- CommScope
Table of Contents
- 100G-SR4 Arista Network Cabling Solutions
- Specifications:
- Product Information
- Product Usage Instructions
- Introduction
- Arista 100G/200G Transceiver Models
- Propel Cabling Solutions for Arista 100 and 200G Fiber Optic
- Q: What types of transceivers are supported by the Arista
- Q: How can I design a cabling system using CommScope’s Propel
100G-SR4 Arista Network Cabling Solutions
“`html
Specifications:
- Supported Transceiver Types: 100G and 200G
- Connector Type: MPO8 and MPO16
- Cabling System: CommScope’s Propel solution
Product Information
The Arista 100G/200G transceiver models support a wide range of
optical transceivers for various fiber types and applications.
These transceivers are designed for high-speed data transmission
and are compatible with Arista networking equipment.
Product Usage Instructions
Introduction
This document provides guidance for designing a cabling system
using CommScope’s Propel solution for Arista 100G & 200G fiber
optic transceivers. Reference diagrams and application scenarios
using MPO8 and MPO16 based trunk cabling or direct connect
equipment cords are included.
Arista 100G/200G Transceiver Models
Arista offers a full range of 100G/200G optical transceivers
suitable for various network setups. These include QSFP 200G
Transceivers for parallel Multi-mode Fiber (MMF), QSFP 200G
Transceivers for duplex SMF, OSFP 200G Transceivers for duplex SMF,
QSFP-DD 200G Transceivers for duplex SMF, and more.
Propel Cabling Solutions for Arista 100 and 200G Fiber Optic
Transceivers
The Propel solution from CommScope offers efficient cabling
solutions for Arista’s fiber optic transceivers. It is recommended
to contact your CommScope representative for additional information
on utilizing Propel cabling systems effectively.
FAQ
Q: What types of transceivers are supported by the Arista
100G/200G transceiver models?
A: The Arista transceiver models support various transceiver
types such as QSFP 200G, OSFP 200G, and QSFP 100G for different
fiber types including Multi-mode Fiber (MMF) and Single-Mode Fiber
(SMF).
Q: How can I design a cabling system using CommScope’s Propel
solution?
A: Refer to the provided reference diagrams and application
scenarios in the user manual to design a cabling system using MPO8
and MPO16 based trunk cabling or direct connect equipment cords.
For additional assistance, contact your CommScope
representative.
“`
SYSTIMAX® PropelTM Cabling Solutions for Arista 100G & 200G Fiber Optic Transceivers
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 3
Arista 100G/200G transceiver models . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Arista 100G/200G Multimode Direct Connections using Equipment Cords . . . . .
. . . . . . . . . . . . . . . . 5 QSFP 100G/200G Transceivers for parallel
Multimode Fiber (MMF). . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
QSFP 100G Transceivers for duplex Multimode Fiber (MMF). . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 5 QSFP 100G Transceivers for
parallel Singlemode Fiber (SMF) . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 6 QSFP 100G/200G Transceivers for duplex Singlemode
Fiber (SMF). . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Arista 100G/200G Connections using the Propel Cabling System . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . 7 Parallel Multimode Fiber (200G-
SR4, 100G-SR4 & 100G-XSR4) . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 7 MPO-16 based . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 7 MPO-8 based. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 8 Duplex Multimode Fiber (100G-SWDM4 & 100G-SRBD) .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MPO-16 based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . 9 MPO-8 based. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 10 Parallel Singlemode Fiber (100GPSM4, 100G-PLRL4) . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 MPO-16
based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MPO-8 based. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 12 Duplex Singlemode Fiber (200G-FR4 & -2LR4, 100G-CDWM4, -XCDWM4, -LR4,
-LRL4, -ERL4, -ZR, -DR, -FR & -LR) . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 MPO-16
based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
MPO-8 based. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 14
Arista 100G/200G Transceiver Breakout Options using the Propel Cabling System.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 15 200GBase-SR4, 100GBase-SR4 or 100GBase-XSR4. . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
MPO-16 based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . 16 MPO-8 based. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 18 100GBase-PSM4 (100GPSM4, 100G-PLRL4) . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 MPO-16
based . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
MPO-8 based. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. .22
Panel index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .24 Propel panels . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .24 Propel panel capacity & adapter
packs/module by size . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .24
2 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic
Transceivers
Introduction
This document serves as a guide when designing a cabling system using
CommScope’s Propel solution for Arista 100G & 200G fiber optic transceivers.
Shown are reference diagrams and options for application scenarios using MPO8
and MPO16 based trunk cabling or direct connect equipment cords. Contact your
CommScope representative for additional information.
3 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic
Transceivers
Arista 100G/200G transceiver models
Arista supports a full range of 100G/200G optical transceivers listed in the
following table:
Part number
Description
QSFP 200G Transceivers for parallel Multi-mode Fiber (MMF)
QSFP-200G-SR4
200GBASE-SR4 QSFP optical transceiver, dual rate 100G/200G
QSFP 200G Transceivers for duplex SMF
QSFP-200G-FR4
200GBASE-FR4 QSFP optical transceiver, dual rate 100G/200G
OSFP 200G Transceivers for duplex SMF
OSFP-200G-2LR4
200GBASE-2LR4 OSFP optical transceiver, dual rate 100G/200G, interoperable with 2 x 100GBASE-LR4
QSFP-DD 200G Transceivers for duplex SMF
QDD-200G-2LR4
200GBASE-2LR4 QSFP-DD optical transceiver, dual rate 100G/200G, interoperable with 2 x 100GBASE-LR4
QSFP 100G Transceivers for parallel Multi-mode Fiber (MMF)
QSFP-100G-SR4
100GBASE-SR4 QSFP optical transceiver
QSFP-100G-XSR4 100GBASE-XSR4 QSFP optical transceiver
QSFP 100G Transceivers for duplex MMF
QSFP-100G-SWDM4 100GBASE-SWDM4 QSFP optical transceiver
QSFP-100G-SRBD 100GBASE-BIDI QSFP optical transceiver
QSFP 100G Transceivers for Parallel Single-Mode Fiber (SMF)
QSFP-100G-PSM4 100GBASE-PSM4 40G/100G dual speed QSFP optical transceiver
QSFP-100G-PLRL4 100GBASE-PLRL4 40G/100G dual speed QSFP optical transceiver
QSFP 100G Transceivers for duplex SMF
QSFP-100G-CWDM4 100GBASE-CWDM4 QSFP optical transceiver
QSFP-100G-XCWDM4
100GBASE-XCWDM4 QSFP optical transceiver, interoperable with 100GBASE-CWDM4 up to 2 km
QSFP-100G-LR4
100GBASE-LR4 QSFP optical transceiver
QSFP-100G-LRL4
100GBASE-LRL4 QSFP optical transceiver, interoperable with 100GBASE-LR4 up to 2 km
QSFP-100G-ERL4
100GBASE-ERL4 QSFP optical transceiver
QSFP-100G-ZR4
100GBASE-ZR4 QSFP optical transceiver
QSFP-100G-DR
100GBASE-DR “100G lambda” QSFP optical transceiver, interoperable with 100GBASE-FR/LR over 500m
QSFP-100G-FR
100GBASE-FR “100G lambda” QSFP optical transceiver, interoperable with 100G- DR/LR over 500m/2km
QSFP-100G-LR
100GBASE-LR “100G lambda” QSFP optical transceiver, interoperable with 100GBASE-DR/FR over 500m/2km
Connector type
MPO-12 UPC
LC-Duplex
LC-Duplex (2x)
CS (2x)
MPO-12 UPC MPO-12 UPC
LC-Duplex LC-Duplex
MPO-12 APC MPO-12 APC
LC-Duplex LC-Duplex LC-Duplex LC-Duplex LC-Duplex LC-Duplex LC-Duplex LC-
Duplex LC-Duplex
Reach OM3 (m) Reach OM4 (m)
70
100
70
100
150
300
70
100
70
100
Reach OS2 (m)
2000
10000
10000
500 2000
2000 10000 10000 2000 40000 80000
500 2000 10000
Table 1: Arista 100G/200G transceivers
Note: The information on this page is taken from the following Arista
documents: Arista 100G Transceivers & Cables Q&A Arista Optical Modules and
Cables Note: MPO-12 applications use 8 fibers and can be run on MPO-8 and on
MPO-16 as well as shown in this document
4 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic
Transceivers
Arista 100G/200G Multimode Direct Connections using Equipment Cords
QSFP 100G/200G Transceivers for parallel Multimode Fiber (MMF)
200GBase-SR4 100GBase-SR4 100GBase-XSR4
MPO8 multimode patch cord
200GBase-SR4 100GBase-SR4 100GBase-XSR4
QSFP Transceiver
QSFP Transceiver
MPO8 multimode UPC patch cords
1
2
3
45 67
8
U
Q
X
QV Q V
F
9 10 11 8 – M
12
13
A
F
Construction type
U Ultra-low loss
Cable family
Q Plenum array R Dual Rated
(OFNR/LSZH)
Fiber type X OM4
multimode V OM5 WB
multimode
Connector 1
QV 8f MPO MM UPC (Non-pinned)
Connector 2
QV 8f MPO MM UPC (Non-pinned)
Cordage size
F 8f PmP Array Cord, 2mm
Fiber count 8 8-fiber
Color
M OM4 Aqua
N OM5 Lime Green
Breakout length A No gland
UOM
F Feet M Meter
Select options for final part number
14-16 010
Length 010-999 ft 003-305 m
100GBase-SWDM4 100GBase-SRBD
QSFP Transceiver
QSFP 100G Transceivers for duplex Multimode Fiber (MMF) LC Duplex multimode patch cord
100GBase-SWDM4 100GBase-SRBD
QSFP Transceiver
SYSTIMAX Uniboot patch cords
1
2
3
4
5
6
U
D
X
LU L U
6
Construction type
U Ultra-low loss
Cable family D Plenum F LSZH/Riser
Fiber type X OM4
multimode V OM5 WB
multimode
Select options for final part number
Connector 1 LU LC Uniboot
Connector 2 LU LC Uniboot
Cordage size
K 1.5mm 6 2.0mm
7 – 8 2 – J
Fiber count 2 2-fiber
Color
M OM4 Aqua
N OM5 Lime Green
9
10
X
F
Breakout length X No gland
UOM
F Feet M Meter
11-12 010
Lenght 2-200 Feet 1-061 Meter
5 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Arista 100G/200G Singlemode Direct Connections using Equipment Cords
100GBase-PSM4 100GBase-PLRL4
QSFP Transceiver
QSFP 100G Transceivers for parallel Singlemode Fiber (SMF) MPO8 multimode patch cord
100GBase-PSM4 100GBase-PLRL4
QSFP Transceiver
MPO8 multimode APC patch cords
1
2
3
45 67
8
U
Q
G
QP Q V
F
9 10 11 8 – M
Construction type
U Ultra-low loss
Cable family
Q Plenum array R Dual Rated
(OFNR/LSZH)
Fiber type
G Singlemode (A2)
Select options for final part number
Connector 1
QP 8f MPO SM APC (Non-pinned)
Connector 2
QP 8f MPO SM APC (Non-pinned)
Cordage size
F 8f PmP Array Cord, 2mm
Fiber count 8 8-fiber
Color J Yellow
12
13
A
F
Breakout length A No gland
UOM
F Feet M Meter
14-16 010
Length 010-999 ft 003-305 m
QSFP 100G/200G Transceivers for duplex Singlemode Fiber (SMF)
200GBase-FR4 QSFP-100G-CWDM4, QSFP-100G-CWDM4, QSFP-100G-XCWDM4, QSFP-100G-
LR4, QSFP-100G-LRL4, QSFP-100G-ERL4, QSFP-100G-ZR4, QSFP-100G-DR, QSFP-100G-
FR,
QSFP-100G-LR
QSFP Transceiver
LC Duplex singlemode patch cord
200GBase-FR4 QSFP-100G-CWDM4, QSFP-100G-CWDM4, QSFP-100G-XCWDM4, QSFP-100G-
LR4, QSFP-100G-LRL4, QSFP-100G-ERL4, QSFP-100G-ZR4, QSFP-100G-DR, QSFP-100G-
FR,
QSFP-100G-LR
QSFP Transceiver
SYSTIMAX Uniboot patch cords
1
2
3
4
5
6
U
D
G
LU L U
6
Construction type
U Ultra-low loss
Cable family D Plenum F LSZH/Riser
Fiber type
G Singlemode (A2)
Connector 1 LU LC Uniboot
Connector 2 LU LC Uniboot
Cordage size
K 1.5mm 6 2.0mm
7 – 8 2 – J
Fiber count 2 2-fiber
Color J Yellow
9
10
X
F
Breakout length X No gland
UOM
F Feet M Meter
11-12 010
Lenght 2-200 Feet 1-061 Meter
Select options for final part number
OSFP-DD resp. OSFP 200G Transceivers for duplex Singlemode Fiber (SMF)
200GBase-2LR4 OSFP-200G-2LR4
QDD-200G-2LR4
LC Duplex singlemode patch cord (see above) SYSTIMAX CS singlemode patch cord (see below)
200GBase-2LR4 OSFP-200G-2LR4
QDD-200G-2LR4
Item 1
Product Number
Description
UDGCSCS62-JXFxxx or JXMxxx ULL SM CS to CS Uniboot 2f patch cord, Plenum UFGCSCS62-JXFxxx or JXMxxx ULL SM to CS Uniboot 2f patch cord, Dual Rated (OFNR/LSZH)
6 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Arista 100G/200G Connections using the Propel Cabling System
Parallel Multimode Fiber
200GBase-SR4 100GBase-SR4 100GBase-XSR4
QSFP Transceiver
4
MPO16-2x MPO8 array
(Non-pinned)
2
MPO16 adapter pack
3
MPO16(m) – MPO16(m) Trunk (Pinned)
2
MPO16 adapter pack
MPO-16 Based
4
MPO16-2x MPO8 array
(Non-pinned)
200GBase-SR4 100GBase-SR4 100GBase-XSR4
QSFP Transceiver
1
1
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
16-fiber adapter packs 18 per 1 RU 760252806
12 per 1 RU 760252805
9 per 1RU 760252804
6 per 1RU 760252803
Product Number
PPL-AP-4-MPO16-ALL-B PPL-AP-6-MPO16-ALL-B PPL-AP-8-MPO16-ALL-B PPL-
AP-12-MPO16-ALL-B
Description
Propel pass-through adapter pack, Type B Propel pass-through adapter pack,
Type B Propel pass-through adapter pack, Type B Propel pass-through adapter
pack, Type B
Fiber Type
Fiber Count
Front Interface
Rear Interface
All
64
4 MPO16 Key Up with dust caps
4 MPO16 Key Up with dust caps
All
96
6 MPO16 Key Up with dust caps
6 MPO16 Key Up with dust caps
All
128
8 MPO16 Key Up with dust caps
8 MPO16 Key Up with dust caps
All
192
12 MPO16 Key Up with dust caps
12 MPO16 Key Up with dust caps
Select options for final part number
Item #3 MPO16 multimode APC trunk cables
1
2
3
45 67
8
U
G
X
RZ R Z
8
9 10 11 R -M
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1
RZ 16f MPO MM APC (Pinned)
Connector 2
RZ 16f MPO MM APC (Pinned)
Cordage size
8 16f PmP Trunk, 3.0mm SU
Fiber count R 16-fiber S 32-fiber H 48-fiber U 64-fiber L 96-fiber Q 128-fiber M 144-fiber N 192-fiber
Color
M OM4 Aqua N OM5 Lime
green
12
13
J
F
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
14-16 010
Length 010-999 ft 003-305 m
Select options for final part number
Item #4 MPO16 multimode APC conversion array cords
1
2
3
U
Q
X
Construction type
U Ultra-low loss
Cable family
Q Plenum Array
R Dual Rated (OFNR/LSZH)
Fiber type
X OM4 multimode
V OM5 WB multimode
45 67
8
RV Q P
7
9 10 11 R -M
Connector 1
RV 16f MPO MM APC (Non-Pinned)
Connector 2
QP 8f MPO MM UPC (Non-Pinned)
Cordage size
7 16f PmP Array Cord, 3mm
Fiber count R 16-fiber
Color
M OM4 Aqua N OM5 Lime
green
12
13
14-16
D
F
003
Breakout length D 12″ E 24″ H 48″ L 72″
UOM
F Feet M Meter
Length
12 in 3-999 ft
24 in 4-999 ft
48 in 6-999 ft 72 in 8-999 ft 12 in 1-305 m 24-48 in 2-305 m 72 in 3-305 m
Select options for final part number
7 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Arista 100G/200G Connections using the Propel Cabling System
Parallel Multimode Fiber
MPO-8 Based
200GBase-SR4 100GBase-SR4 100GBase-XSR4
QSFP Transceiver
4
MPO8 patchcord (non-pinned)
2
MPO adapter pack
3
MPO8(m) – MPO8(m) Trunk (Pinned)
2
MPO adapter pack
4
MPO8 patchcord (non-pinned)
200GBase-SR4 100GBase-SR4 100GBase-XSR4
QSFP Transceiver
1
1
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
8-fiber adapter packs
18 per 1RU 760252371
Product Number PPL-AP-4-MPO-ALL-B
Description
Propel pass-through adapter pack, Type B
Fiber Type
Fiber Count
Front Interface
Rear Interface
All
32
4 MPO8 Key Up with internal shutters
4 MPO8 Key Up with dust caps
Item #3 MPO8 multimode UPC trunk cables
1
2
3
45 67
8
U
G
X
QX Q X
T
9 10 11 8 -M
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1
QX 8f MPO MM UPC (Pinned)
Connector 2
QX 8f MPO MM UPC (Pinned)
Cordage size
T 8f PmP Trunk, 2.0mm SU
Fiber count 8 8-fiber R 16-fiber F 24-fiber S 32-fiber H 48-fiber U 64-fiber K 72-fiber L 96-fiber M 144-fiber N 192-fiber
Color
M OM4 Aqua N OM5 Lime
green
12
13
14-16
J
F
010
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
Length 010-999 ft 003-305 m
Select options for final part number
Item #4 MPO8 multimode UPC patch cords
1
2
3
45 67
8
U
Q
X
QV Q V
F
9 10 11 8 -M
Construction type
U Ultra-low loss
Cable family
Q Plenum Array
R Dual Rated (OFNR/LSZH)
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1
QV 8f MPO MM UPC (Non-pinned)
Connector 2
QV 8f MPO MM UPC (Non-pinned)
Cordage size
F 8f PmP Array Cord, 2mm
Fiber count 8 8-fiber
Color
M OM4 Aqua N OM5 Lime
green
12
13
A
F
Breakout length A No Gland
UOM
F Feet M Meter
14-16 010
Length 003-999 ft 001-305 m
8 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Select options for final part number
Arista 100G Connections using the Propel Cabling System
Duplex Multimode Fiber
100GBase-SWDM4 100GBase-SRBD
QSFP Transceiver
4
LC Uniboot
5
MPO16 LC DM
6
MPO16(m) – MPO16(m) Trunk (Pinned)
5
MPO16 LC DM
MPO-16 Based
4
LC Uniboot
100GBase-SWDM4 100GBase-SRBD
QSFP Transceiver
1
1
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
Product Number
Description
MPO16 modules
9 per 1RU
Propel ULL Distribution 760252353 PPL-DM-16AU-16LC-OM4-BEU Module, Method B
Enhanced
Propel ULL Distribution 760252354 PPL-DM-16AU-16LC-OM5-BEU Module, Method B
Enhanced
Fiber Type
Fiber Count
Front Interface
Rear Interface
OM4
16
OM5
16
8 duplex LCs with internal shutters
8 duplex LCs with internal shutters
1 MPO16/APC non-pinned with dust cap
1 MPO16/APC non-pinned with dust cap
Item #3 MPO16 multimode APC trunk cables
1
2
3
45 67
8
U
G
X
RZ R Z
8
9 10 11 R -M
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1
RZ 16f MPO MM APC (Pinned)
Connector 2
RZ 16f MPO MM APC (Pinned)
Cordage size
8 16f PmP Trunk, 3.0mm SU
Fiber count R 16-fiber S 32-fiber H 48-fiber U 64-fiber L 96-fiber Q 128-fiber M 144-fiber N 192-fiber
Color
M OM4 Aqua N OM5 Lime
green
12
13
J
F
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
14-16 010
Length 010-999 ft 003-305 m
Select options for final part number
Item #4 SYSTIMAX Uniboot patch cords
1
2
3
4
5
6
U
D
X
LU L U
6
Construction type
U Ultra-low loss
Cable family D Plenum F LSZH/Riser
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1 LU LC Uniboot
Connector 2 LU LC Uniboot
Cordage size
K 1.5mm 6 2.0mm
7 – 8 2 – M
Fiber count 2 2-fiber
Color
M OM4 Aqua N OM5 Lime
green
9
10
X
F
Breakout length X No gland
UOM
F Feet M Meter
11-12 010
Lenght 2-200 Feet 1-061 Meter
Select options for final part number
9 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Arista 100G Connections using the Propel Cabling System
Duplex Multimode Fiber
100GBase-SWDM4 100GBase-SRBD
QSFP Transceiver
4
LC Uniboot
2
MPO8 LC DM
3
MPO8(m) – MPO8(m) Trunk (Pinned)
2
MPO8 LC DM
MPO-8 Based
100GBase-SWDM4
4
100GBase-SRBD
LC Uniboot
QSFP Transceiver
1
1
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
Product Number
MPO8 Modules with MPO/UPC in multimode
18 per 1RU
760252332 760252333
PPL-DM-8U-8LC-OM4-BEU PPL-DM-8U-8LC-OM5-BEU
Description
Propel ULL Distribution Module, Method B Enhanced Propel ULL Distribution
Module, Method B Enhanced
Fiber Type
Fiber Count
Front Interface
Rear Interface
OM4
8
OM5
8
4 duplex LCs with internal shutters
4 duplex LCs with internal shutters
1 MPO8 non-pinned with internal shutter
1 MPO8 non-pinned with internal shutter
Item #3 MPO8 multimode UPC trunk cables
1
2
3
45 67
8
U
G
X
QX Q X
T
9 10 11 8 -M
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1
QX 8f MPO MM UPC (Pinned)
Connector 2
QX 8f MPO MM UPC (Pinned)
Cordage size
T 8f PmP Trunk, 2.0mm SU
Fiber count 8 8-fiber R 16-fiber F 24-fiber S 32-fiber H 48-fiber U 64-fiber K 72-fiber L 96-fiber M 144-fiber N 192-fiber
Color
M OM4 Aqua N OM5 Lime
green
12
13
14-16
J
F
010
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
Length 010-999 ft 003-305 m
Select options for final part number
Item #4 SYSTIMAX Uniboot patch cords
1
2
3
4
5
6
U
D
X
LU L U
6
Construction type
U Ultra-low loss
Cable family D Plenum F LSZH/Riser
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1 LU LC Uniboot
Connector 2 LU LC Uniboot
Cordage size
K 1.5mm 6 2.0mm
7 – 8 2 – M
Fiber count 2 2-fiber
Color
M OM4 Aqua N OM5 Lime
green
9
10
X
F
Breakout length X No gland
UOM
F Feet M Meter
11-12 010
Lenght 2-200 Feet 1-061 Meter
Select options for final part number
10 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Arista 100G Connections using the Propel Cabling System
Parallel Singlemode Fiber
100GBase-PSM4 100GBase-PLRL4
QSFP Transceiver
4
MPO16-2x MPO8 array (non-pinned)
2
MPO16 adapter
pack
3
MPO16(m) – MPO16(m) Trunk (Pinned)
2
MPO16 adapter pack
MPO-16 Based
4
MPO16-2x MPO8 array (non-pinned)
100GBase-PSM4 100GBase-PLRL4
QSFP Transceiver
1
1
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
16-fiber adapter packs 18 per 1 RU 760252806
12 per 1 RU 760252805
9 per 1RU 760252804
6 per 1RU 760252803
Product Number
PPL-AP-4-MPO16-ALL-B PPL-AP-6-MPO16-ALL-B PPL-AP-8-MPO16-ALL-B PPL-
AP-12-MPO16-ALL-B
Description
Propel pass-through adapter pack, Type B Propel pass-through adapter pack,
Type B Propel pass-through adapter pack, Type B Propel pass-through adapter
pack, Type B
Fiber Type
Fiber Count
Front Interface
Rear Interface
All
64
4 MPO16 Key Up with dust caps
4 MPO16 Key Up with dust caps
All
96
6 MPO16 Key Up with dust caps
6 MPO16 Key Up with dust caps
All
128
8 MPO16 Key Up with dust caps
8 MPO16 Key Up with dust caps
All
192
12 MPO16 Key Up with dust caps
12 MPO16 Key Up with dust caps
Select options for final part number
Item #3 MPO16 singlemode APC trunk cables
1
2
3
45 67
8
U
G
G
RX R X
8
9 10 11 R- J
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
G Singlemode (A2)
Connector 1
RX 16f MPO SM APC (Pinned)
Connector 2
RX 16f MPO SM APC (Pinned)
Cordage size
8 16f PmP Trunk, 3.0mm SU
Fiber count R 16-fiber S 32-fiber H 48-fiber U 64-fiber L 96-fiber Q 128-fiber M 144-fiber N 192-fiber
Color J Yellow
12
13
J
F
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
14-16 010
Length 010-999 ft 003-305 m
Select options for final part number
Item #4 MPO16 singlemode APC conversion array cords
1
2
3
45 67
8
U
Q
G
RP Q P
7
9 10 11 R- J
Construction type
U Ultra-low loss
Cable family
Q Plenum Array
R Dual Rated (OFNR/LSZH)
Fiber type
G Singlemode (A2)
Connector 1
RP 16f MPO SM APC (Non-Pinned)
Connector 2
QP 8f MPO SM APC (Non-Pinned)
Cordage size
7 16f PmP Array Cord, 3mm
Fiber count R 16-fiber
Color J Yellow
11 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
12
13
14-16
D
F
003
Breakout length D 12″ E 24″ H 48″ L 72″
UOM
F Feet M Meter
Length
12 in 3-999 ft
24 in 4-999 ft
48 in 6-999 ft 72 in 8-999 ft 12 in 1-305 m 24-48 in 2-305 m 72 in 3-305 m
Select options for final part number
Arista 100G Connections using the Propel Cabling System
Parallel Singlemode Fiber
100GBase-PSM4 100GBase-PLRL4
4
MPO8 patchcord (non-pinned)
QSFP Transceiver
2
MPO adapter pack
3
MPO8(m) – MPO8(m) Trunk (Pinned)
2
MPO adapter pack
4
MPO8 patchcord (non-pinned)
1
1
MPO-8 Based 100GBase-PSM4 100GBase-PLRL4
QSFP Transceiver
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
8-fiber adapter packs
18 per 1RU 760252371
Product Number PPL-AP-4-MPO-ALL-B
Description
Propel pass-through adapter pack, Type B
Fiber Type
Fiber Count
Front Interface
Rear Interface
All
32
4 MPO8 Key Up with internal shutters
4 MPO8 Key Up with dust caps
Item #3 MPO8 singlemode APC trunk cables
1
2
3
45 67
8
U
G
G
QX Q X
T
9 10 11 8- J
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
G Singlemode (A2)
Connector 1
QX 8f MPO SM APC (Pinned)
Connector 2
QX 8f MPO SM APC (Pinned)
Cordage size
T 8f PmP Trunk, 2.0mm SU
Fiber count 8 8-fiber R 16-fiber F 24-fiber S 32-fiber H 48-fiber U 64-fiber K 72-fiber L 96-fiber M 144-fiber N 192-fiber
Color J Yellow
12
13
J
F
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
14-16 010
Length 010-999 ft 003-305 m
Select options for final part number
Item #4 MPO8 singlemode APC patch cord
1
2
3
45 67
8
U
Q
G
QP Q P
F
9 10 11 8- J
Construction type
U Ultra-low loss
Cable family
Q Plenum Array
R Dual Rated (OFNR/LSZH)
Fiber type
G Singlemode (A2)
Connector 1
QP 8f MPO SM APC (Non-pinned)
Connector 2
QP 8f MPO SM APC (Non-pinned)
Cordage size
F 8f PmP Array Cord, 2mm
Fiber count 8 8-fiber
Color J Yellow
12
13
14-16
A
F
010
Breakout length A No Gland
UOM
F Feet M Meter
Length 003-999 ft 001-305 m
Select options for final part number
12 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Arista 100G/200G Connections using the Propel Cabling System
Duplex Singlemode Fiber
MPO-16 Based
200GBase-FR4 QSFP-100G-CWDM4, QSFP-100G-CWDM4,
QSFP-100G-XCWDM4, QSFP-100G-LR4, QSFP-100G-LRL4, QSFP-100G-ERL4, QSFP-100G-
ZR4, QSFP-100G-DR, QSFP-100G-FR, QSFP-100G-LR
200GBase-FR4 QSFP-100G-CWDM4, QSFP-100G-CWDM4,
QSFP-100G-XCWDM4, QSFP-100G-LR4, QSFP-100G-LRL4, QSFP-100G-ERL4, QSFP-100G-
ZR4, QSFP-100G-DR, QSFP-100G-FR, QSFP-100G-LR
4
LC Uniboot
2
MPO16 LC DM
3
MPO16(m) – MPO16(m) Trunk (Pinned)
2
MPO16 LC DM
4
LC Uniboot
QSFP
1
Transceiver
1
QSFP
Transceiver
200GBase-2LR4 QDD-200G-2LR4
OSFP-200G-2LR4
5
CS to LC duplex patch cord
LC duplex singlemode patch cord
4
5
CS to LC duplex patch cord
LC duplex singlemode patch cord
4
200GBase-2LR4 QDD-200G-2LR4
OSFP-200G-2LR4
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
MPO16 modules
9 per 1RU 760252352
Product Number PPL-DM-16AU-16LC-SM-BEU
Description
Propel ULL Distribution Module, Method B Enhanced
Fiber Type
Fiber Count
Front Interface
Rear Interface
OS2
16
8 duplex LCs with internal shutters
1 MPO16/APC non-pinned with dust cap
Item #3 MPO16 singlemode APC trunk cables
1
2
3
45 67
8
U
G
G
RX R X
8
9 10 11 R- J
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
G Singlemode (A2)
Connector 1
RX 16f MPO SM APC (Pinned)
Item #4 & 5 SYSTIMAX patch cords
Connector 2
RX 16f MPO SM APC (Pinned)
Cordage size
8 16f PmP Trunk, 3.0mm SU
Fiber count R 16-fiber S 32-fiber H 48-fiber U 64-fiber L 96-fiber Q 128-fiber M 144-fiber N 192-fiber
Color J Yellow
1
2
U
D
Construction type
U Ultra-low loss
Cable family D Plenum F LSZH/Riser
3
4
5
6
G
LU L U
6
7 – 8 2 – J
Fiber type
G Singlemode (A2)
Connector 1 LU LC Uniboot CS CS Connector
Connector 2 LU LC Uniboot
Cordage size
K 1.5mm (LC) 6 2.0 mm
(LC, CS)
Fiber count 2 2-fiber
Color J Yellow
14-16 010
12
13
J
F
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
Length 010-999 ft 003-305 m
Select options for final part number
9
10
11-12
X
F
010
Breakout length X No gland
UOM
F Feet M Meter
Lenght
2-200 Feet 1-061 Meter
Select options for final part number
13 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Arista 100G/200G Connections using the Propel Cabling System
Duplex Singlemode Fiber
200GBase-FR4
QSFP-100G-CWDM4, QSFP-100G-CWDM4,
QSFP-100G-XCWDM4, QSFP-100G-LR4,
QSFP-100G-LRL4, QSFP-100G-ERL4,
QSFP-100G-ZR4, QSFP-100G-DR,
QSFP-100G-FR, QSFP-100G-LR
4
LC Uniboot
2
MPO8 LC DM
3
MPO8(m) – MPO8(m) Trunk (Pinned)
MPO-8 Based
200GBase-FR4
QSFP-100G-CWDM4, QSFP-100G-CWDM4,
QSFP-100G-XCWDM4, QSFP-100G-LR4,
QSFP-100G-LRL4, QSFP-100G-ERL4,
QSFP-100G-ZR4, QSFP-100G-DR,
QSFP-100G-FR, QSFP-100G-LR
2
MPO8 LC DM
4
LC Uniboot
QSFP
1
Transceiver
1
QSFP
Transceiver
200GBase-2LR4 QDD-200G-2LR4
OSFP-200G-2LR4
5
CS to LC duplex patch cord
LC duplex singlemode patch cord
4
5
CS to LC duplex patch cord
LC duplex singlemode patch cord
4
200GBase-2LR4 QDD-200G-2LR4
OSFP-200G-2LR4
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
Product Number
MPO8 Modules with MPO in singlemode
18 per 1RU 760252334 PPL-DM-8AU-8LC-SM-BEU
Description
Propel ULL Distribution Module, Method B Enhanced
Item #3 MPO8 singlemode APC trunk cables
Fiber Type
Fiber Count
Front Interface
Rear Interface
OS2
8
4 duplex LCs with internal shutters
1 MPO8/APC non-pinned with internal shutter
1
2
3
45 67
8
U
G
G
QX Q X
T
9 10 11 8- J
12
13
14-16
J
F
010
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
G Singlemode (A2)
Connector 1
QX 8f MPO SM APC (Pinned)
Item #4 & 5 SYSTIMAX patch cords
Connector 2
QX 8f MPO SM APC (Pinned)
Cordage size
T 8f PmP Trunk, 2.0mm SU
Fiber count 8 8-fiber R 16-fiber F 24-fiber S 32-fiber H 48-fiber U 64-fiber K 72-fiber L 96-fiber M 144-fiber N 192-fiber
Color J Yellow
1
2
3
4
5
6
U
D
G
LU L U
6
7 – 8 2 – J
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
Length 010-999 ft 003-305 m
Select options for final part number
9
10
11-12
X
F
010
Construction type
U Ultra-low loss
Cable family D Plenum F LSZH/Riser
Fiber type
G Singlemode (A2)
Connector 1 LU LC Uniboot CS CS Connector
Connector 2 LU LC Uniboot
Cordage size
K 1.5mm (LC) 6 2.0 mm
(LC, CS)
Fiber count 2 2-fiber
Color J Yellow
Breakout length X No gland
UOM
F Feet M Meter
Lenght
2-200 Feet 1-061 Meter
Select options for final part number
14 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Arista 100G/200G Transceiver Breakout Options using the Propel Cabling System
Arista 100G/200G transceiver breakout options
The tables below summarize the breakout options for 100G and 200G QSFP ports.
In the tables below, the term “near end” transceiver refers to the transceiver
/ cable plugged into the QSFP port, and the “remote end” refers to the “broken
out” transceiver / cable connected to the SFP port.
Product Number QSFP-100G-SR4 & QSFP-100G-XSR4
QSFP-100G-PSM4
Supported Breakout Modes 4x25G to interoperate with 25GBASE-SR. Care must be
taken to use the same forward error correction (FEC) mode on both ends to
link-up. 4x25G to interoperate with 25GBASE-LR. Care must be taken to use the
same forward error correction (FEC) mode on both ends to link-up.
Table 2: Arista 100G Transceivers Breakout Options
QSFP200 SKU QSFP-200-SR4
QSFP 200 Port Configuration
4x 50G 4x 25G
2x 100G-2
Fiber type
Parallel MMF (4 fiber pairs), 100m reach
Optical modulation 50G PAM-4 25G NRZ
50G PAM-4
Breakout port SKUs
4x 50G-SR SFPs
4x 25G-SR SFPs (SFP-25G-SR / SFP-25G-MR-SR)
2x 100G-SR2 optics (This mode is less common. It can be used
to breakout QSFP-200G-SR4 2x 100G-SR2 QSFPs or
2x 100G-SR2 SFP-DD/DSFPs)*
- Arista does not provide 100G-SR2 QSFPs, SFP-DDs or DSFPs at this time. This breakout mode may be used with third party 100G-SR2 optics.
Table 3: Arista 200G Transceivers Breakout Options
Note: The information on this page is taken from the following Arista
documents: Arista 100G Transceivers & Cables Q&A Arista 200G Transceivers &
Cables
15 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic
Transceivers
Arista 100G/200G Transceiver Breakout Options using the Propel Cabling System
Multimode Fiber Applications
200GBase-SR4 100GBase-SR4 or 100GBase-XSR4
MPO-16 Based
4 x 25GBase-SR or 4 x 50GBase-SR 4 x 25GBase-SR
2x QSFP Transceiver
4
MPO16-2x MPO8 array (non-pinned)
2
MPO16 adapter
pack
3
MPO16(m) – MPO16(m) Trunk (Pinned)
6
MPO16 LC-DM
1
5
LC Uniboot
1
4/8 SFP Transceiver
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
16-fiber adapter packs 18 per 1 RU 760252806
12 per 1 RU 760252805
9 per 1RU 760252804
6 per 1RU 760252803
Product Number
PPL-AP-4-MPO16-ALL-B PPL-AP-6-MPO16-ALL-B PPL-AP-8-MPO16-ALL-B PPL-
AP-12-MPO16-ALL-B
Description
Propel pass-through adapter pack, Type B Propel pass-through adapter pack,
Type B Propel pass-through adapter pack, Type B Propel pass-through adapter
pack, Type B
Fiber Type
Fiber Count
Front Interface
Rear Interface
All
64
4 MPO16 Key Up with dust caps
4 MPO16 Key Up with dust caps
All
96
6 MPO16 Key Up with dust caps
6 MPO16 Key Up with dust caps
All
128
8 MPO16 Key Up with dust caps
8 MPO16 Key Up with dust caps
All
192
12 MPO16 Key Up with dust caps
12 MPO16 Key Up with dust caps
Item #3 MPO16 multimode APC trunk cables
1
2
3
45 67
8
U
G
X
RZ R Z
8
9 10 11 R -M
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1
RZ 16f MPO MM APC (Pinned)
Connector 2
RZ 16f MPO MM APC (Pinned)
Cordage size
8 16f PmP Trunk, 3.0mm SU
Fiber count R 16-fiber S 32-fiber H 48-fiber U 64-fiber L 96-fiber Q 128-fiber M 144-fiber N 192-fiber
Color
M OM4 Aqua N OM5 Lime
green
12
13
14-16
J
F
010
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
Length 010-999 ft 003-305 m
Select options for final part number
16 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Continued on next page
Arista 100G/200G Transceiver Breakout Options using the Propel Cabling System
Item #4 MPO16 multimode APC conversion array cords
1
2
3
45 67
8
U
Q
X
RV Q P
7
9 10 11 R -M
Construction type
U Ultra-low loss
Cable family
Q Plenum Array
R Dual Rated (OFNR/LSZH)
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1
RV 16f MPO MM APC (Non-Pinned)
Connector 2
QP 8f MPO MM UPC (Non-Pinned)
Cordage size
7 16f PmP Array Cord, 3mm
Fiber count R 16-fiber
Color
M OM4 Aqua N OM5 Lime
green
12
13
D
F
Breakout length D 12″ E 24″ H 48″ L 72″
UOM
F Feet M Meter
14-16 003
Length 12 in 3-999 ft 24 in 4-999 ft 48 in 6-999 ft 72 in 8-999 ft 12 in 1-305
m 24-48 in 2-305 m 72 in 3-305 m
Select options for final part number
Item #5 SYSTIMAX Uniboot patch cords
1
2
3
4
5
6
U
D
X
LU L U
6
Construction type
U Ultra-low loss
Cable family D Plenum F LSZH/Riser
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1 LU LC Uniboot
Connector 2 LU LC Uniboot
Cordage size
K 1.5mm 6 2.0mm
7 – 8 2 -M
Fiber count 2 2-fiber
Color
M OM4 Aqua N OM5 Lime
green
9
10
X
F
Breakout length X No gland
UOM
F Feet M Meter
11-12 010
Lenght 2-200 Feet 1-061 Meter
Select options for final part number
Item #6
Material ID
Product Number
Description
MPO16 modules
9 per 1RU
Propel ULL Distribution 760252353 PPL-DM-16AU-16LC-OM4-BEU Module, Method B
Enhanced
Propel ULL Distribution 760252354 PPL-DM-16AU-16LC-OM5-BEU Module, Method B
Enhanced
Fiber Type
Fiber Count
Front Interface
Rear Interface
OM4
16
OM5
16
8 duplex LCs with internal shutters
8 duplex LCs with internal shutters
1 MPO16/APC non-pinned with dust cap
1 MPO16/APC non-pinned with dust cap
17 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Arista 100G/200G Transceiver Breakout Options using the Propel Cabling System
Multimode Fiber Applications
200GBase-SR4 100GBase-SR4 or 100GBase-XSR4
MPO-8 Based
4 x 25GBase-SR or 4 x 50GBase-SR 4 x 25GBase-SR
QSFP Transceiver
4
MPO8 patchcord (non-pinned)
2
MPO adapter pack
3
MPO8(m) – MPO8 (m) Trunk (Pinned)
6
MPO8 LC-DM
5
LC Uniboot
1
1
4x SFP Transceiver
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
8-fiber adapter packs
18 per 1RU 760252371
Product Number PPL-AP-4-MPO-ALL-B
Description
Propel pass-through adapter pack, Type B
Fiber Type
Fiber Count
Front Interface
Rear Interface
All
32
4 MPO8 Key Up with internal shutters
4 MPO8 Key Up with dust caps
Item #3 MPO8 multimode UPC trunk cables
1
2
3
45 67
8
U
G
X
QX Q X
T
9 10 11 8 -M
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1
QX 8f MPO MM UPC (Pinned)
Connector 2
QX 8f MPO MM UPC (Pinned)
Cordage size
T 8f PmP Trunk, 2.0mm SU
Fiber count 8 8-fiber R 16-fiber F 24-fiber S 32-fiber H 48-fiber U 64-fiber K 72-fiber L 96-fiber M 144-fiber N 192-fiber
Color
M OM4 Aqua N OM5 Lime
green
12
13
J
F
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
14-16 010
Length 010-999 ft 003-305 m
Select options for final part number
18 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Continued on next page
Arista 100G/200G Transceiver Breakout Options using the Propel Cabling System
Item #4 MPO8 multimode UPC patch cords
1
2
3
45 67
8
U
Q
X
QV Q V
F
9 10 11 8 -M
Construction type
U Ultra-low loss
Cable family
Q Plenum Array
R Dual Rated (OFNR/LSZH)
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1
QV 8f MPO MM UPC (Non-pinned)
Connector 2
QV 8f MPO MM UPC (Non-pinned)
Cordage size
F 8f PmP Array Cord, 2mm
Fiber count 8 8-fiber
Color
M OM4 Aqua N OM5 Lime
green
12
13
A
F
Breakout length A No Gland
UOM
F Feet M Meter
14-16 010
Length 003-999 ft 001-305 m
Select options for final part number
Item #5 SYSTIMAX Uniboot patch cords
1
2
3
4
5
6
U
D
X
LU L U
6
Construction type
U Ultra-low loss
Cable family D Plenum F LSZH/Riser
Fiber type
X OM4 multimode
V OM5 WB multimode
Connector 1 LU LC Uniboot
Connector 2 LU LC Uniboot
Cordage size
K 1.5mm 6 2.0mm
7 – 8 2 -M
Fiber count 2 2-fiber
Color
M OM4 Aqua N OM5 Lime
green
9
10
X
F
Breakout length X No gland
UOM
F Feet M Meter
11-12 010
Lenght 2-200 Feet 1-061 Meter
Select options for final part number
Item #6
Material ID
Product Number
MPO8 Modules with MPO/UPC in multimode
18 per 1RU
760252332 760252333
PPL-DM-8U-8LC-OM4-BEU PPL-DM-8U-8LC-OM5-BEU
Description
Propel ULL Distribution Module, Method B Enhanced Propel ULL Distribution
Module, Method B Enhanced
Fiber Type
Fiber Count
Front Interface
Rear Interface
OM4
8
OM5
8
4 duplex LCs with internal shutters
4 duplex LCs with internal shutters
1 MPO8 non-pinned with internal shutter
1 MPO8 non-pinned with internal shutter
19 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Arista 100G Transceiver Breakout Options using the Propel Cabling System
Singlemode Fiber Applications
100GBASE-PSM4 100GBase-PLRL4
2x QSFP Transceiver
4
MPO16 -2x MPO8 (Non-pinned)
2
3
MPO16 adapter MPO16(m) – MPO16(m) Trunk
pack
(Pinned)
6
MPO16 LC-DM
MPO-16 Based
8 x 25GBase-LR
5
LC Uniboot
8x SFP Transceiver
1
1
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
16-fiber adapter packs 18 per 1 RU 760252806
12 per 1 RU 760252805
9 per 1RU 760252804
6 per 1RU 760252803
Product Number
PPL-AP-4-MPO16-ALL-B PPL-AP-6-MPO16-ALL-B PPL-AP-8-MPO16-ALL-B PPL-
AP-12-MPO16-ALL-B
Description
Propel pass-through adapter pack, Type B Propel pass-through adapter pack,
Type B Propel pass-through adapter pack, Type B Propel pass-through adapter
pack, Type B
Fiber Type
Fiber Count
Front Interface
Rear Interface
All
64
4 MPO16 Key Up with dust caps
4 MPO16 Key Up with dust caps
All
96
6 MPO16 Key Up with dust caps
6 MPO16 Key Up with dust caps
All
128
8 MPO16 Key Up with dust caps
8 MPO16 Key Up with dust caps
All
192
12 MPO16 Key Up with dust caps
12 MPO16 Key Up with dust caps
Item #3 MPO16 singlemode APC trunk cables
1
2
3
45 67
8
U
G
G
RX R X
8
9 10 11 R- J
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
G Singlemode (A2)
Connector 1
RX 16f MPO SM APC (Pinned)
Connector 2
RX 16f MPO SM APC (Pinned)
Cordage size
8 16f PmP Trunk, 3.0mm SU
Fiber count R 16-fiber S 32-fiber H 48-fiber U 64-fiber L 96-fiber Q 128-fiber M 144-fiber N 192-fiber
Color J Yellow
12
13
J
F
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
14-16 010
Length 010-999 ft 003-305 m
Select options for final part number
20 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Continued on next page
Arista 100G Transceiver Breakout Options using the Propel Cabling System
Item #4 MPO16 singlemode APC conversion array cords
1
2
3
45 67
8
U
Q
G
RP Q P
7
9 10 11 R- J
Construction type
U Ultra-low loss
Cable family
Q Plenum Array
R Dual Rated (OFNR/LSZH)
Fiber type
G Singlemode (A2)
Connector 1
RP 16f MPO SM APC (Non-Pinned)
Connector 2
QP 8f MPO SM APC (Non-Pinned)
Cordage size
7 16f PmP Array Cord, 3mm
Fiber count R 16-fiber
Color J Yellow
12
13
D
F
Breakout length D 12″ E 24″ H 48″ L 72″
UOM
F Feet M Meter
14-16 003
Length 12 in 3-999 ft 24 in 4-999 ft 48 in 6-999 ft 72 in 8-999 ft 12 in 1-305
m 24-48 in 2-305 m 72 in 3-305 m
Select options for final part number
Item #5 SYSTIMAX Uniboot patch cords
1
2
3
4
5
6
U
D
G
LU L U
6
Construction type
U Ultra-low loss
Cable family D Plenum F LSZH/Riser
Fiber type
G Singlemode (A2)
Connector 1 LU LC Uniboot
Connector 2 LU LC Uniboot
Cordage size
K 1.5mm 6 2.0mm
7 – 8 2 – J
Fiber count 2 2-fiber
Color J Yellow
9
10
X
F
Breakout length X No gland
UOM
F Feet M Meter
11-12 010
Lenght 2-200 Feet 1-061 Meter
Select options for final part number
Item #6
Material ID
MPO16 modules
9 per 1RU 760252352
Product Number PPL-DM-16AU-16LC-SM-BEU
Description
Propel ULL Distribution Module, Method B Enhanced
Fiber Type
Fiber Count
Front Interface
Rear Interface
OS2
16
8 duplex LCs with internal shutters
1 MPO16/APC non-pinned with dust cap
21 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Arista 100G Transceiver Breakout Options using the Propel Cabling System
Singlemode Fiber Applications
100GBASE-PSM4 100GBase-PLRL4
QSFP Transceiver
4
MPO8 patch cord (Non-pinned)
2
MPO adapter pack
3
MPO8(m) – MPO8(m) Trunk (Pinned)
6
MPO8 LC-DM
MPO-8 Based 4 x 25GBase-LR
5
LC Uniboot
4x SFP Transceiver
1
1
Item #1 Propel Patch Panels (see Panel Index)
Item #2
Material ID
8-fiber adapter packs
18 per 1RU 760252371
Product Number PPL-AP-4-MPO-ALL-B
Description
Propel pass-through adapter pack, Type B
Fiber Type
Fiber Count
Front Interface
Rear Interface
All
32
4 MPO8 Key Up with internal shutters
4 MPO8 Key Up with dust caps
Item #3 MPO8 singlemode APC trunk cables
1
2
3
45 67
8
U
G
G
QX Q X
T
9 10 11 8- J
Construction type
U Ultra-low loss
Cable family
3 Trunk, LSZH CPR B2ca
G Trunk, Plenum
J Trunk, Dual Rated (OFNR/LSZH)
Fiber type
G Singlemode (A2)
Connector 1
QX 8f MPO SM APC (Pinned)
Connector 2
QX 8f MPO SM APC (Pinned)
Cordage size
T 8f PmP Trunk, 2.0mm SU
Fiber count 8 8-fiber R 16-fiber F 24-fiber S 32-fiber H 48-fiber U 64-fiber K 72-fiber L 96-fiber M 144-fiber N 192-fiber
Color J Yellow
12
13
14-16
J
F
010
Breakout length
J 22″ Break Propel No Pull Grip
K 22″ Break Propel Pull Grip
UOM
F Feet M Meter
Length 010-999 ft 003-305 m
Select options for final part number
Item #4 MPO8 singlemode APC patch cord
1
2
3
45 67
8
U
Q
G
QP Q P
F
9 10 11 8- J
Construction type
U Ultra-low loss
Cable family
Q Plenum Array
R Dual Rated (OFNR/LSZH)
Fiber type
G Singlemode (A2)
Connector 1
QP 8f MPO SM APC (Non-pinned)
Connector 2
QP 8f MPO SM APC (Non-pinned)
Cordage size
F 8f PmP Array Cord, 2mm
Fiber count 8 8-fiber
Color J Yellow
22 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
12
13
14-16
A
F
010
Breakout length A No Gland
UOM
F Feet M Meter
Length 003-999 ft 001-305 m
Select options for final part number
Continued on next page
Arista 100G Transceiver Breakout Options using the Propel Cabling System
Item #5 SYSTIMAX Uniboot patch cords
1
2
3
4
5
6
U
D
G
LU L U
6
Construction type
U Ultra-low loss
Cable family D Plenum F LSZH/Riser
Fiber type
G Singlemode (A2)
Connector 1 LU LC Uniboot
Connector 2 LU LC Uniboot
Cordage size
K 1.5mm 6 2.0mm
7 – 8 2 – J
Fiber count 2 2-fiber
Color J Yellow
9
10
11-12
X
F
010
Breakout length X No gland
UOM
F Feet M Meter
Lenght
2-200 Feet 1-061 Meter
Select options for final part number
Item #6
Material ID
Product Number
MPO8 Modules with MPO in singlemode
18 per 1RU 760252334 PPL-DM-8AU-8LC-SM-BEU
Description
Propel ULL Distribution Module, Method B Enhanced
Fiber Type
Fiber Count
Front Interface
Rear Interface
OS2
8
4 duplex LCs with internal shutters
1 MPO8/APC non-pinned with internal shutter
23 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
Panel Index
Propel Panels
Product Number PPL-1U PPL-2U PPL-4U
Description Propel 1RU sliding panel Propel 2RU sliding panel Propel 4RU sliding panel
Propel Panel Capacity-Adapter Packs/Module by Size
LC Duplex = MPO Ports
Ports
1RU
72
2RU
144
4RU
288
8-fiber 6/blade
18 36 72
12-fiber 4/blade
12 24 48
Material ID 760252002 760252003 760252004
16-fiber 3/blade
9 18 36
24-fiber 2/blade
6 12 24
24 Propel Cabling Solutions for Arista Arista 100 and 200G Fiber Optic Transceivers
CommScope pushes the boundaries of communications technology with game-
changing ideas and ground-breaking discoveries that spark profound human
achievement. We collaborate with our customers and partners to design, create
and build the world’s most advanced networks. It is our passion and commitment
to identify the next opportunity and realize a better tomorrow. Discover more
at commscope.com.
commscope.com
Visit our website or contact your local CommScope representative for more
information. © 2023 CommScope, Inc. All rights reserved. All trademarks
identified by TM or ® are trademarks or registered trademarks in the US and
may be registered in other countries. All product names, trademarks and
registered trademarks are property of their respective owners. This document
is for planning purposes only and is not intended to modify or supplement any
specifications or warranties relating to CommScope products or services.
ARISTA is a registered trademark owned by Arista Networks, Inc. CO-117601-EN
(10/23)