COMMSCOPE 860674607-041-42 HG Anchor Guyed Tower Installation Guide
- June 1, 2024
- CommScope
Table of Contents
Installation Guide
GENERAL NOTES
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN
ALL U-BOLTS
USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL
FORCE ON
EACH LEG OF THE U-BOLT.
TEST
PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING
CONTAINER
5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES; INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
ITEM NO.| PART NUMBER| DESCRIPTION| QTY.| WEIGHT|
NOTE NO.
---|---|---|---|---|---
1| MTC4165-041-42-00| 41-42 INCH CROSSMEMBER GALVANIZED| 1| 26.96 LBS|
2| MTC4166-00| STEEL OFFSET BRACKET,GALV| 2| 7.08 LBS|
3| 9674-1| BOLT,EYE,5/8X3,STL,ZN PLD| 2| 0.08 LBS|
4| GWF-05| 5/8″ GALV FLAT WASHER, 1.70D| 4| 0.06 LBS|
5| GWL-05| 5/8″ GALV LOCK WASHER| 2| 0.03 LBS|
6| GN-05| 5/8″ GALV HEX NUT| 4| 0.08 LBS|
7| GB-03145| 3/8″ X 1-1/2″ GALV BOLT KIT| 4| 0.07 LBS|
8| GWF-03| 3/8″ GALV FLAT WASHER| 8| 0.01 LBS|
9| GUB3230| 3/8″ X 2″ X 3″ GALV U-BOLT| 4| 0.24 LBS|
10| MTC4165-LABO1| LABEL, HG ANCHOR,GUYED-TOWER| 1| 0.00 LBS|
REVISIONS
REV.| DESCRIPTION| DATE| APPROVED
A| INITIAL RELEASE| LL1090 16NOV23| EB1063 40183094CM0
B| MTC4165-LABO1 (ITEM 10) WAS MTC4165-LABO2| 12MAR24| 63 401Z317CMO
NOTE: -MAXIMUM LOAD PER EYEBOLT = 1000 LBS
-MAXIMUM LOAD PER GRIP ANCHOR = 2000 LBS
-NOT TO BE USED FOR HOISTING
-COMPETENT PERSON TO MAKE DETERMINATION OF USAGE ON THE STRUCTURE
NOTE: -MAXIMUM LOAD PER EYEBOLT = 1000 LBS
-MAXIMUM LOAD PER GRIP ANCHOR = 2000 LBS
-NOT TO BE USED FOR HOISTING
-COMPETENT PERSON TO MAKE DETERMINATION OF USAGE ON THE STRUCTURE
© 2024 CommScope, Inc. Confidential
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>