COMMSCOPE M-LOC Bird Proof Jumper for HELIAX M-LOC Series Instruction Manual
- October 27, 2023
- CommScope
Table of Contents
COMMSCOPE M-LOC Bird Proof Jumper for HELIAX M-LOC Series
ASSEMBLING INSTRUCTION
- Remove any packaging and dust caps from the M-LOC and the device, and uncoil the M-LOC assembly. Hold the bent flange portion of latch back toward cable strain relief.
- Align the key on the housing with the keyway opening in the device. Orient the holes in the M-LOC connector to the panel mount connectors.
- Align the M-LOC connector with the antenna mating between the connector housing and bulkhead. While mating, a slight back-and-forth motion on the housing/cables will assist in centering and seating the port connectors into alignment. Do Not twist the jumpers. Push the latch toward the base of the antenna to engage the latch pins at the base of the connector housing.
- Apply force on the bent flange of the latch until the detents in the arms pop over the pins. There will be an audible and tactile click. To reduce hand strain, a screwdriver may be used.
- To remove the M-LOC connector pull latch flange away from the base of the antenna. To reduce hand strain, a flat-blade screwdriver may be inserted in the slot above the latch flange and pulled down against the flange.
- Grasp the M-LOC connector housing, hold the bent flange portion of latch back toward cable strain relief, and pull the connector away from the device. A slight back-and-forth motion on the housing helps to release the port connectors.
- For end 2 start with connecting the connector to the device.
- Slide the rubber sleeve over the connector. Twist at the end to ensure a tight fit against the bottom of the device.
- Slide the hard cylinder over the rubber sleeve. Twist at the end to ensure a tight fit against the bottom of the device.
- For jumper assemblies without regard to boots applying weatherproofing to 4.3-10 assemblies is recommended (contractor-supplied).
M-LOC cluster connector bottom installation video
M-LOC cluster connector back installation video
CommScope
1100 CommScope Place SE P.O. Box 339, Hickory, NC 28603-0339 (828) 324-2200 (800) 982-1708 www.commscope.com
Technical Support
+ 1 888 297 6433, Option 3 (Toll Free US and Canada) + 1 49-9099-69-333
https://www.commscope.com/wisupport (open a ticket)
Notice: CommScope disclaims any liability or responsibility for the results of improper or unsafe installation, inspection, maintenance, or removal practices. © 2021 CommScope
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>