Milwaukee 48-22-8332-6 PACKOUT Large Hook Installation Guide

: June 12, 2024
: Milwaukee

Table of Contents

48-22-8332-6 PACKOUT Large Hook
MATERIALS NEEDED:
Documents / Resources

48-22-8332-6 PACKOUT Large Hook
Installation Guide Milwaukee 48-22-8332-6 PACKOUT Large
Hook INSTALLATION GUIDE
DRYWALL WOOD STUD CONCRETE

48-22-8332-6 PACKOUT Large Hook

DRYWALL WALL PLATE INSTALLATION INSTALLATION VIDEO WATCH

or visit https://qr.mke.tl/2w9dv

MATERIALS NEEDED:

Milwaukee 48-22-8332-6 PACKOUT Large Hook - fig 4

Locate & mark studs behind drywall with a pencil. Milwaukee 48-22-8332-6
PACKOUT Large Hook - fig 5 Hold Wall Plate in desired location. Ensure plate is level. Milwaukee 48-22-8332-6 PACKOUT Large Hook - fig 6 If using a Large Wall Plate, mark the 10 identified fastening points with a pencil. If using a Compact Wall Plate, mark the 5 identified fastening points. Follow drywall anchor manufacturer’s instructions to install anchors. For any markings that fall on studs pre-drill holes with a 3/32″ drill bit. Milwaukee 48-22-8332-6 PACKOUT Large Hook - fig
8 Fasten drywall anchor manufacturer’s recommended fasteners into the drywall anchors and #12 x 2″ screws into 3/32″ pilot holes. Slide additional Wall Plates into place by guiding the new plate’s Quick Alignment Tabs on the top, bottom or sides into place on the first Wall Mounted plate. Milwaukee 48-22-8332-6 PACKOUT Large Hook - fig
10 Repeat process to add additional plates and fully customize your shop.

WOOD STUD
WALL PLATE INSTALLATION INSTALLATION VIDEO WATCH

or visit https://qr.mke.tl/23m82

MATERIALS NEEDED: Milwaukee 48-22-8332-6 PACKOUT Large Hook - fig
13 Have a partner hold up plywood backer in desired location and align it so it is in the center of a stud. Ensure plywood is level. Attach plywood to studs with a minimum of 9 wood screws. Hold Wall Plate in desired location. Ensure plate is level. Large Wall Plates require the 10 identified fastening points and Compact Wall Plates require the 5 identified points. Mark these holes with a pencil. Milwaukee 48-22-8332-6 PACKOUT Large Hook - fig
17 Pre-drill all mounting holes with a 3/32″ bit. Hold up plate and fasten with 1/4″ x 1-1/4″ lag bolts. Milwaukee
48-22-8332-6 PACKOUT Large Hook - fig 19 Slide additional Wall Plates into place by guiding the new plate’s Quick Adjustment Tabs on the top, bottom, or sides into place on the first Wall Mounted Plate. Milwaukee 48-22-8332-6 PACKOUT Large Hook - fig
20 Repeat process to add additional plates and fully customize your shop.

CONCRETE
WALL PLATE INSTALLATION INSTALLATIONVIDEO WATCH

Milwaukee 48-22-8332-6 PACKOUT Large Hook - qr code 2 or visit https://qr.mke.tl/26sgs

MATERIALS NEEDED:

Milwaukee 48-22-8332-6 PACKOUT Large Hook - fig 23 Hold Wall Plate in desired location. Ensure plate is level. If using a Large Wall Plate, mark the 10 identified fastening points with a pencil. If using a Compact Wall Plate, mark the 5 identified fastening points. Pre-drill holes with 3/16″ masonry bit. Milwaukee 48-22-8332-6 PACKOUT Large Hook - fig 26 Using 1/4″ x 1-1/4″ concrete anchors, fasten the plate to the wall. Slide additional Wall Plates into place by guiding the new plate’s Quick Alignment Tabs on the top, bottom or sides into place on the first Wall Mounted Plate. Repeat process to add additional plates and fully customize your shop. Milwaukee 48-22-8332-6 PACKOUT Large Hook - fig
29 BUILD YOUR SYSTEM

Milwaukee 48-22-8332-6 PACKOUT Large Hook - fig 30

Documents / Resources

| Milwaukee 48-22-8332-6 PACKOUT Large Hook [pdf] Installation Guide
48-22-8332-6 PACKOUT Large Hook, 48-22-8332-6, PACKOUT Large Hook, Large Hook, Hook
---|---