NORA LIGHTING NM2-2RDC Round LED Recessed Downlight Owner’s Manual
- August 5, 2024
- NORA LIGHTING
Table of Contents
NM2-2RDC Round LED Recessed Downlight
“`html
Product Specifications:
-
Model: NM2-2RDC
-
Type: 2 M2 Round LED Recessed Downlight
-
Source: 6W, 8W, or 10W LED
-
Luminous Flux: 400lm, 600lm, or 850lm
-
Construction: Die-cast aluminum trims
available in matte black or matte powder white finish -
Options: Square trim, pinhole trim, wall wash
trim, reflector inserts, or baffle inserts
Product Usage Instructions:
Installation:
-
Ensure the power source is switched off before
installation. -
Choose the appropriate trim accessory based on your desired
configuration. -
Insert the downlight into the ceiling cutout and secure it in
place. -
If needed, attach any optional field changeable accessories
like reflector inserts or baffle inserts. -
Connect the wiring following the manufacturer’s
instructions. -
Test the downlight to ensure proper functionality before
closing up the ceiling.
Maintenance:
-
Regularly clean the downlight using a soft cloth to remove dust
and dirt. -
Avoid using harsh chemicals or abrasive materials that may
damage the finish. -
Inspect the downlight periodically for any signs of wear or
damage and replace parts if necessary.
Frequently Asked Questions (FAQ):
Q: Can I install this downlight in insulated ceilings?
A: Yes, the M2 downlight series is suitable for both insulated
and non-insulated applications.
Q: How do I change the trim accessory on the downlight?
A: To change the trim accessory, carefully remove the existing
trim and replace it with the desired accessory following the
installation instructions.
Q: What is the recommended distance between multiple
downlights?
A: It is recommended to space downlights evenly, typically about
4-6 feet apart for optimal lighting distribution.
“`
NM2-2RDC
2″ M2 Round LED Recessed Downlight Source: 6W, 8W or 10W LED
400lm, 600lm or 850lm
Type Project Catalog No. Notes
PRODUCT DESCRIPTION M2 downlight series features quality and convenience with
easy installation for insulated or non-insulated applications. Luminaires can
be configured into multiple options with trim accessories and produces over
850 lumens.
FEATURES · No housing required – IC Air-Tight rated · Easy installation for
remodel or new construction
applications · Variety of trim accessories to configure desired
appearance · Quick disconnect allows for extended lengths · 400lm, 600lm or
850lm LED packages · 2700K, 3000K or 4000K @ 90+ CRI · Triac or ELV dimming ·
5-year limited warranty · ENERGY STAR certified · cETLus Listed for Wet
Locations
SPECIFICATION Construction: Die-cast aluminum trims available in matte black
or matte powder white finish. Open downlight includes a reflector with the
same finish as trim; optional field changeable accessories are available;
square trim, pinhole trim, wall wash trim, reflector inserts or baffle
inserts.
Air Flow Restriction: Luminaire has factory installed gasket to restrict
airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in
accordance with ASTM283 Air-Tight requirements.
Clearance: IC rated luminaires are rated for direct contact with insulation
(not spray foam insulation), no minimum clearance is required.
Junction Box: Prewired junction box includes quick connect to LED fixtures for
ease of installation. Junction box includes two (400lm/600lm) or four (850lm)
1/2″ trade size knockouts and snap on cover with 7″ quick connect wire.
Luminaire includes 5″ (400lm/600lm) or 4″ (850lm) quick connect wire. Maximum
length between luminaire and driver is 40′. For longer remote driver remote
run length, consult factory.
Mounting: No housing is required, two tensions steel spring clips secure
luminaire to ceiling. Accommodates ceiling thickness up to 3/4″. New
construction frame-in kits are available, see accessories.
ELECTRICAL Input Voltage Input Power Color
Temperature
CRI
40
60
85
120V
6W
2700K or 3000K
8W
2700K, 3000K, 4000K
90+ CRI
10W
2700K or 3000K
Dimming
Operating Temp.
Beam Spread
Triac / ELV
40°C max.
25°C max.
36° Flood
Lifetime
60,000 hours @ L70
Trims: M2 series is available in three lumen outputs with LED driver. Round trims can be converted to baffles, pinholes or wall wash in the field with optional trims and inserts.
OPTIONAL TRIM ACCESSORIES NM2-2REFL: Reflector Insert for NM2-2RDC, Black or Haze NM2-2BAF: Baffle Insert for NM2-2RDC, Black or White NM2-2RPH: Round Pinhole Trim for NM2-2RDC, Black or White NM2-2RW: Round Wall Wash Trim for NM2-2RDC, Black or White NM2-2SDT: Square Trim for NM2-2RDC, Black or White
OPTIONAL MOUNTING ACCESSORIES NM2-MLS1: One Head Multiple Lighting System Plate NM2-MLS2: Two Head Multiple Lighting System Plate NM2-MLS3: Three Head Multiple Lighting System Plate NF-R246: Universal New Construction Frame-In NFC-R275: New Construction Frame-In with Collar NM2-EW-4: 4′ Quick Connect Linkable Extension Cable NM2-EW-10: 10′ Quick Connect Linkable Extension Cable
LABELS AND LISTINGS · cETLus Listed for Wet Locations · ENERGY STAR certified
· 5-Year Limited Warranty · FCC compliant · Certified to the high efficacy
requirements of California
Title 24 JA8-2022
5YEAR LIMITED WARRANTY
24TITLE 90+
AIR
T CRI COMPLIANT WET
IGHT
2″ M2 Round LED Recessed Downlight
Trim Type NM2-2RDC = 2″ Round Downlight
Lumens / Wattage
40 = 400lm / 6W 60 = 600lm / 8W 85 = 850lm / 10W
60 = 600lm / 8W
Color Temperature 27 = 2700K 30 = 3000K
40 = 4000K
Finish BB = Matte Black MPW = Matte Powder White
MPW = Matte Powder White
M2 Trim Accessories
Accessory Type NM2-2REFL = Reflector for NM2-2RDC
NM2-2BAF = Baffle for NM2-2RDC NM2-2RPH = Round Pinhole Trim for NM2-2RDC
NM2-2RW = Round Wall Wash Trim for NM2-2RDC NM2-2SDT = Square Trim for
NM2-2RDC
Finish
B = Matte Black HZ = Haze
B = Matte Black MPW = Matte Powder White
PRODUCT IMAGES AND DIMENSIONS
NM2-2RDCXXXXBB 400lm or 600lm Matte Black
2-1/2″ (40/60) 4-3/4″ (85)
2″
3-3/16″
NM2-2RDC85XXMPW 850lm
Matte Powder White
1-1/2″ Cut out: 2-7/8″
2-1/2″ 4″ (40/60) 3-7/8″ (85)
NM2-2REFL Reflector Insert
NM2-2BAF Baffle Insert
NM2-2RPH Round Pinhole Trim
NM2-2RW Round Wall Wash Trim
NM2-2SDT Square Trim
NM2-EW Extension Cables
Optional Mounting Accessories
Accessory Type
Finish
NM2-MLS1 = One Head MLS Plate NM2-MLS2 = Two Head MLS Plate NM2-MLS3 = Three Head MLS Plate
BB = Matte Black MPW = Matte Powder White
NF-R246 = Universal New Construction Frame-In NFC-R275 = New Construction Frame-In with Collar NM2-EW-4 = 4′ Quick Connect Extension Cable NM2-EW-10 = 10′ Quick Connect Extension Cable
Example: NM2-2RDC6030MPW = 2″ M2 Round LED Recessed Downlight, 600lm / 8W, 3000K, Matte Powder White
6505 Gayhart Street, Commerce, CA 90040 Tel 800.686.6672 | www.noralighting.com | e-mail: nora@noralighting.com © 2024 Nora Lighting, Inc. All rights reserved. Specifications subject to change without notice.
013124P1
NM2-2RDC
2″ M2 Round LED Recessed Downlight Accessories
Type Project Catalog No. Notes
Reflector/Baffle Insert for NM2-2RDC
Square Trim for NM2-2RDC
Round Pinhole Trim for NM2-2RDC
Round Wall Wash Trim for NM2-2RDC
NM2-2REFLB
Matte Black Reflector
NM2-2REFLHZ
Haze Reflector
NM2-2BAFB
Matte Black Baffle
NM2-2BAFMPW
Matte Powder White Baffle
Replaces the reflector included with
NM2-2RDC downlight
NM2-2SDTB
Matte Black
NM2-2SDTMPW
Matte Powder White
Converts the round trim included with
NM2-2RDC downlight into a square trim
NM2-2RPHB
Matte Black
NM2-2RPHMPW
Matte Powder White
Converts the round trim included with
NM2-2RDC downlight into a round pinhole
NM2-2RWB
Matte Black
NM2-2RWMPW
Matte Powder White
Converts the round trim included with
NM2-2RDC downlight into a round wall wash
Multiple Lighting System Plates
Universal New Construction Frame-In
NM2-MLS1B
1 Head / Matte Black
NM2-MLS1MPW
1 Head / Matte Powder White
NM2-MLS2B
2 Head / Matte Black
NM2-MLS2MPW
2 Head / Matte Powder White
NM2-MLS3B
3 Head / Matte Black
NM2-MLS3MPW
3 Head / Matte Powder White
Converts multiple round LED luminaires into multiple
lighting system without a large housing.
NF-R246 Universal new construction frame-in can be used to assist installing can-less recessed downlighting.
7.73″
2.84″
New Construction Frame-In with Collar NFC-R275
New construction frame-in can be used to assist installing can-less recessed
downlighting.
4.33″ 2.76″
Quick Connect Extension Linkable Cables
NM2-EW-4
4′ Cable
NM2-EW-10
10′ Cable
Use to extend the length between luminaire and
driver enclosure. Can be connected together to
create custom lengths. Maximum length between
luminaire and driver is 40′. For longer remote driver
remote run length, consult factory.
4.33″ 12″
Luminaire Examples
6505 Gayhart Street, Commerce, CA 90040 Tel 800.686.6672 | www.noralighting.com | e-mail: nora@noralighting.com © 2024 Nora Lighting, Inc. All rights reserved. Specifications subject to change without notice.
013124P2
PHOTOMETRICS
2″ M2 Round LED Recessed Downlight
Test Information Test Number: NTR11363 Part Number: NM2-2RDC4027MPW Beam
Spread: 36° Flood Lumens: 445lm Wattage: 6.2W Efficacy: 72lpw CCT / CRI: 2700K
/ 90 CRI Spacing Criteria (0°-180°): 0.6 Spacing Criteria (90°-270°): 0.6
Test Information Test Number: NTR11350 Part Number: NM2-2RDC4030MPW Beam
Spread: 37° Flood Lumens: 464lm Wattage: 6.23W Efficacy: 75lpw CCT / CRI:
3000K / 90 CRI Spacing Criteria (0°-180°): 0.62 Spacing Criteria (90°-270°):
0.62
Test Information Test Number: NTR11351 Part Number: NM2-2RDC6027MPW Beam
Spread: 37° Flood Lumens: 594lm Wattage: 7.8W Efficacy: 76lpw CCT / CRI: 2700K
/ 90 CRI Spacing Criteria (0°-180°): 0.62 Spacing Criteria (90°-270°): 0.6
Test Information Test Number: NTR11351 Part Number: NM2-2RDC6030MPW Beam
Spread: 36° Flood Lumens: 641lm Wattage: 8.1W Efficacy: 79lpw CCT / CRI: 3000K
/ 90 CRI Spacing Criteria (0°-180°): 0.6 Spacing Criteria (90°-270°): 0.6
Polar Curve
261
522
783
1044
10°
Polar Curve
249
498
747
996
10°
Polar Curve
329
657
986
1315
10°
Polar Curve
369
738
1107
1476
10°
Type Project Catalog No. Notes
Illuminance at a Distance
70°
Distance from Luminaire
FC at Nadir
2′
261fc
4′ 50°
6′
65.3fc 29fc
8′
16.3fc
10′
10.4fc
Beam Diameter
1′-4″ 2′-7″ 3′-11″ 5′-2″ 6′-6″
30°
Zonal Lumen Summary
Zone
Lumens
0-30
387
0-40
418
0-60
436
0-90
443
90-180
2
0-180
445
% Luminaire
86.8 93.7 97.9 99.6 0.4 100
Candela Table
Vertical Angles
Candela
0
1044
5
993
15
645
25
264
35
42
45
14
Illuminance at a Distance
70°
Distance from Luminaire
FC at Nadir
2′
248fc
4′ 50°
6′
61.9fc 27.5fc
8′
15.5fc
10′
9.9fc
Beam Diameter
1′-4″ 2′-8″ 4′ 5′-5″ 6′-8″
30°
Zonal Lumen Summary
Zone
Lumens
0-30
393
0-40
434
0-60
455
0-90
464
90-180
1
0-180
464
% Luminaire
84.7 93.5 98 99.9 0.1 100
Candela Table
Vertical Angles
Candela
0
990
5
950
15
639
25
272
35
51
45
15
Illuminance at a Distance
70°
Distance from Luminaire
FC at Nadir
2′
327fc
4′ 50°
6′
81.9fc 36.4fc
8′
20.5fc
10′
13.1fc
Beam Diameter
1′-4″ 2′-8″ 4′ 5′-5″ 6′-8″
30°
Zonal Lumen Summary
Zone
Lumens
0-30
505
0-40
557
0-60
582
0-90
593
90-180
1
0-180
594
% Luminaire
85 93.7 97.9 99.8 0.2 100
Candela Table
Vertical Angles
Candela
0
1310
5
1251
15
847
25
359
35
85
45
19
Illuminance at a Distance
70°
Distance from Luminaire
FC at Nadir
2′
368fc
4′ 50°
6′
92.1fc 40.9fc
8′
23fc
10′
14.7fc
Beam Diameter
1′-4″ 2′-7″ 3′-11″ 5′-2″ 6′-6″
30°
Zonal Lumen Summary
Zone
Lumens
0-30
547
0-40
597
0-60
626
0-90
639
90-180
1
0-180
641
% Luminaire
85.4 93.2 97.8 99.8 0.2 100
Candela Table
Vertical Angles
Candela
0
1473
5
1403
15
909
25
372
35
67
45
21
6505 Gayhart Street, Commerce, CA 90040 Tel 800.686.6672 | www.noralighting.com | e-mail: nora@noralighting.com © 2024 Nora Lighting, Inc. All rights reserved. Specifications subject to change without notice.
013124P3
PHOTOMETRICS
2″ M2 Round LED Recessed Downlight
Test Information Test Number: NTR1431 Part Number: NM2-2RDC8530MPW Beam Spread: 38° Flood Lumens: 882lm Wattage: 10.18W Efficacy: 87lpw CCT / CRI: 3000K / 90 CRI Spacing Criteria (0°-180°): 0.62 Spacing Criteria (90°-270°): 0.62
Polar Curve
476
952
1428
1904
10°
Type Project Catalog No. Notes
Illuminance at a Distance
70°
Distance from Luminaire
FC at Nadir
2′
476fc
4′ 50°
6′
119fc 52.9fc
8′
29.7fc
10′
19fc
Beam Diameter
1′-5″ 2′-8″ 4′-1″ 5′-6″ 6′-11″
30°
Zonal Lumen Summary
Zone
Lumens
0-30
757
0-40
824
0-60
864
0-90
880
90-180
2
0-180
882
% Luminaire
85.9 93.4 98 99.8 0.2 100
Candela Table
Vertical Angles
Candela
0
1904
5
1824
15
1246
25
540
35
88
45
27
6505 Gayhart Street, Commerce, CA 90040 Tel 800.686.6672 | www.noralighting.com | e-mail: nora@noralighting.com © 2024 Nora Lighting, Inc. All rights reserved. Specifications subject to change without notice.
013124P4
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>