NORA LIGHTING M1 LED Miniature Recessed Owner’s Manual
- July 30, 2024
- NORA LIGHTING
Table of Contents
- NORA LIGHTING M1 LED Miniature Recessed
- Product Specifications
- Product Images and Dimensions
- Frequently Asked Questions
- PRODUCT DESCRIPTION
- FEATURES
- SPECIFICATION
- ACCESSORIES
- DIMENSIONS
- Optional Accessories
- PHOTOMETRICS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
NORA LIGHTING M1 LED Miniature Recessed
Product Specifications
- Product Name: M1 LED Miniature Recessed Series
- Source: 2W LED
- Luminous Flux: 100lm
- Color Temperature / CRI: 2700K or 3000K / 90 CRI
- Driver Requirement: Class 2 12V DC driver
Product Description
The M1 miniature recessed series features quality and convenience with easy installation for indoor or outdoor applications. The IC-rated M1 modules are excellent for niche lighting. Each luminaire includes four plastic downlight trims, four optics for the desired beam spread and output, and 6 quick connects. The series is available in either 2700K or 3000K color temperature options.
Construction and Installation
The threaded LED module allows for field-changeable optics and trims. IC-rated luminaires can be in direct contact with insulation. When installed in a cabinet-type setting, ensure a minimum distance of 6″ between luminaires. No housing is required for mounting; two tension steel spring clips secure the luminaire to the surface with a minimum ceiling thickness of 1/4″.
Driver Information
A Class 2 power supply is required for operation, ordered\ separately. NM1-DVR drivers come with a pre-wired junction box for quick connection to LED fixtures, ensuring ease of installation. NAPKED drivers require a splitter cable or wire harness system (ordered separately).
Accessories
Additional accessories available for purchase include Quick Connect Linkable Extension Cables in various lengths, SplitterCables, Wire Harness Systems, and New Construction Frame-Ins.
Product Images and Dimensions
Refer to the product catalog for detailed dimensions and images of the available trims and finishes.
5-Year Limited Warranty
This product comes with a 5-year limited warranty for added peace of mind.
Frequently Asked Questions
- Q: What is the warranty period for the product?
- A: The product comes with a 5-year limited warranty.
- Q: Are the luminaires suitable for both indoor and outdoor use?
- A: Yes, the M1 series luminaires are suitable for both indoor and outdoor applications.
- Q: How should the driver be connected to the LED fixtures?
- A: The NM1-DVR drivers come with a pre-wired junction box that allows for quick connect to the LED fixtures, ensuring easy installation.
PRODUCT DESCRIPTION
M1 miniature recessed series features quality and convenience with easy installation for indoor or outdoor applications. The IC rated M1 modules are excellent for niche lighting. Luminaires include four plastic downlight trims, four optics and 6″ quick connect. Series is available in 2700K or 3000K and requires a Class 2 12V DC driver.
FEATURES
- No housing required
- Easy installation for remodel or new construction applications
- Field changeable optics (spot, narrow flood, flood & wide)
- Threaded LED module allows for field changeable trims
- Quick disconnect allows for extended lengths
- 100lm LED packages
- 2700K or 3000K @ 90+ CRI
- Triac or ELV dimming
- 5-year limited warranty
SPECIFICATION
- Included with each luminaire: LED module includes four plastic trims (round and square) in black and white finishes. Also included are four optics for desired beam spread and output.
- Construction: Threaded LED module allows for field changeable optics and trims.
- Clearance: IC rated luminaires are rated for direct contact with insulation (not spray foam insulation). When LED module NM1 is installed in a cabinet-type installation, the minimum distance between luminaires is 6″.
- Driver: Class 2 power supply required, ordered separately. NM1-DVR drivers include a pre-wired junction box with a quick connection to LED fixtures for ease of installation. NAPKED drivers require splitter cable or wire harness system (ordered separately).
- Mounting: No housing is required, two tension steel spring clips secure the luminaire to surface. 1/4″ minimum ceiling thickness.
- Field Changeable Optics: Each luminaire includes four field changeable optics. 15° spot (frosted), 45° narrow flood (frosted – installed), 60° flood (frosted) and 60° flood (clear).
ELECTRICAL
- Input Voltage: 12V DC
- Lumens / Wattage: 100lm / 2W
- Color Temperature: 2700K or 3000K
- Color Rendering Index: 90+ CRI
- Beam Spread: 15° Spot, 45° Flood installed, Frosted 60° Wide Flood and Clear 60° Wide Flood (each luminaire includes all four optics)
- Operating Temp: 0-40°C (Undercabinet installation) 0-25°C (Cabinet and IC installation)
- Max. Run Length: Total combined runs cannot exceed 80′
- Dimming: Dimmable down to 10% with Triac or ELV dimmer Click Here or check the complete dimmer list at www.NoraLighting.com in the “Compatibility” page under the “Resources” tab
TRIMS
- NM1-RSS: Round Stainless Steel Trim
- NM1-SSS: Square Stainless Steel Trim
- NM1-RAEYELID: Round Scoop Trim
- NM1-RAIHEC: Round Hexcell Stainless Steel Trim
- NM1-RLOUV: Round Louver Stainless Steel Trim
- NM1-RSSD: Round Stainless Steel Indicator Trim
DRIVERS
- NM1-DVR12: 12VDC 12W Non-Dimmable Hardwire Driver
- NAPKED-5040HW: 12VDC 35W IC Dimmable Hardwire Driver
- NAPKED-5060HW: 12VDC 60W Dimmable Hardwire Driver
- NPSU-60W/12: 12VDC 60W Universal Dimming Driver
ACCESSORIES
- NM1-EXT: Quick Connect Linkable Extension Cables (available in 6″, 12″, 18″, 48″, 72″ and 240″)
- NM1-TM6: Splitter Cable (1 input – 6 output)
- NM1-WH6: Wire Harness System (1 input – 6 output)
- NM1-F: New Construction Frame-In
LABELS AND LISTINGS
- cETLus Listed for Wet Locations, cabinet and type IC (NM1-170)\ cETLus Listed for Damp Locations, under-cabinet and type IC (NM1-DVR12) cETLus Listed for Damp Locations, cabinet and type IC (NAPKED-5040HW)
- cETLus Listed for Damp Locations and cabinet (NAPKED-5060HW)
- 5-Year Limited Warranty
- FCC compliant
DIMENSIONS
1″ M1 LED Miniature Recessed
1″ M1 Trims – Requires NM1-170 LED Module
Example: NM1-17030X2PBW / NM1-DVR12 = 1″ M1 LED Module and (4) Plastic Trims / 12VDC 12W Non-Dimmable Hardwire Driver
Optional Accessories
NM1
1″ M1 LED Miniature Recessed Accessories
12VDC Non-Dimmable Hardwire Driver
- NM1-DVR12 12W
- Input Voltage: 120V
- Output Voltage: 12V DC
- Maximum Load: 10W
- Dimming: Non-Dimmable
- Includes: Quick connect cable to NM1 module
12VDC Dimmable Hardwire Driver
- NAPKED-5040HW 35W (IC)
- Input Voltage: 120V
- Output Voltage: 12V DC
- Maximum Load: 28W
- Compartment Clearance: Minimum compartment
- size is 11-1/2″ x 3-1/2″ x 11-1/2″
- Dimming: Triac or ELV
- Requires: Splitter cable or wire harness system
12VDC Dimmable Hardwire Driver
- NAPKED-5060HW 60W (Non-IC)
- Input Voltage: 120V
- Output Voltage: 12V DC
- Maximum Load: 48W
- Compartment Clearance: Minimum compartment
- size is 11-1/2″ x 3-1/2″ x 11-1/2″
- Dimming: Triac or ELV
- Requires: Splitter cable or wire harness system
Class II Universal Dimming Driver
- NPSU-60W/12 60W (Non-IC)
- Input Voltage: 110-277V
- Output Voltage: 12V DC
- Maximum Load: 60W
- Compartment Clearance: Minimum compartment
- size is 5″ on all sides
- Dimming: Triac, ELV, MLV, 0-10V, PWM
- Requires: Splitter cable or or wire harness system
Quick Connect Extension Linkable Cables
- NM1-EXT6 6″ Cable
- NM1-EXT12 12″ Cable
- NM1-EXT18 18″ Cable
- NM1-EXT48 48″ Cable
- NM1-EXT240 240″ Cable
Use to extend the length between the luminaire and driver/splitter/wire harness. Can be connected together to create custom lengths. Can be used as a power feed for NAPKED LED drivers. The maximum length between the luminaire and the driver is 80′.
Splitter Cable (1 input – 6 output)
NM1-TM6
- Use to connect up to (6) NM1 LED modules to an LED driver. The maximum length between the luminaire and the driver is 80’. Includes power feed for NAPKED LED drivers.
- Input wire length: 4-3/4″
- Output wire lengths: 5-1/4″ each
Wire Harness System
NM1-WH6
Use to connect up to (6) NM1 LED modules to an LED driver on an evenly spaced
wire. Each 6″ drop is spaced 32-1/2″ on the center. The maximum length between
the luminaire and the driver is 80′. Includes power feed for NAPKED LED
drivers.
Spacing between luminaires: 32-1/2″
- Output wire length: 6″ each
New Construction Frame-In
NM1-F
For new construction pre-wiring and easier layout planning. Includes wire clip that holds low voltage connector close to cut-out during rough-in installations.
PHOTOMETRICS
1” M1 LED Miniature Recessed Series
Test Information
- Test Number: ALD-PG190715009
- Part Number: NM1-17027X2PBW
- Beam Spread: Narrow Flood
- Lumens: 100lm
- Wattage: 2.1W
- Efficacy: 98lpw
- CCT / CRI: 2700K / 90 CRI
- Spacing Criteria (0°-180°): 0.68
- Spacing Criteria (90°-270°): 0.56
6505 Gayhart Street, Commerce, CA 90040 Tel 800.686.6672
2024 Nora Lighting, Inc. All rights reserved. Specifications are subject to change without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>