NORA LIGHTING NM4-R470 4 Inch Round LED Recessed Elbow Owner’s Manual
- August 5, 2024
- NORA LIGHTING
Table of Contents
NM4-R470 4 Inch Round LED Recessed Elbow
Product Information
Specifications:
- Model: NM4-R470
- Type: 4 M4 Round LED Recessed Elbow
- Source: 12W LED
- Luminous Flux: 950lm
- Air Flow Restriction: Yes (Factory-installed gasket)
Product Usage Instructions:
Installation:
-
Ensure the power is switched off before installation.
-
Locate the suitable position in the ceiling for the recessed
elbow light. -
Carefully cut a hole in the ceiling according to the dimensions
specified in the manual. -
Connect the wiring following the provided instructions,
ensuring proper insulation. -
Gently place the light fixture into the hole and secure it
using the included mounting hardware. -
Switch on the power to test the light.
Maintenance:
Regularly clean the surface of the light fixture with a soft,
dry cloth to remove dust and debris. Avoid using harsh chemicals or
abrasive materials that may damage the finish.
Troubleshooting:
If the light fails to turn on, check the power source and
connections. Ensure the bulb is securely in place and not damaged.
Contact customer support if issues persist.
FAQ:
Q: Can I dim the NM4-R470 light?
A: Yes, this model is dimmable. Make sure to use compatible
dimmer switches for optimal performance.
Q: Is it suitable for damp locations?
A: No, this product is designed for indoor dry locations only.
Avoid installing in areas with high humidity or direct water
exposure.
NM4-R470
4″ M4 Round LED Recessed Elbow Source: 12W LED
950lm
PRODUCT DESCRIPTION 4″ M4 Round LED Elbow downlight features an adjustable
head that extends 75° and rotates 300° for precise aiming. Quality and
convenience with easy installation for insulated or non-insulated
applications. Luminaires can be configured into square trim with accessory.
FEATURES · No housing required – IC Air-Tight rated · Field changeable optics
included · Easy installation for remodel or new construction
applications · Square trim available for an alternative appearance · Quick
disconnect allows for extended lengths · 2700K or 3000K @ 90+ CRI · Triac or
ELV dimming · 5-year limited warranty · ENERGY STAR certified · cETLus Listed
for Damp Locations
SPECIFICATION Construction: Die-cast aluminum trims available in matte black
or matte powder white finish. Rotates 300° horizontally and extends up to 75°.
Optional field changeable square trim is available.
Optics: Each downlight includes field changeable optics (24° spot and 40°
narrow flood – preinstalled).
Air Flow Restriction: Luminaire has factory installed gasket to restrict
airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in
accordance with ASTM283 Air-Tight requirements.
Clearance: IC rated luminaires are rated for direct contact with insulation
(not spray foam insulation), no minimum clearance is required.
Junction Box: Prewired junction box includes quick connect to LED fixtures for
ease of installation. Junction box includes four 1/2″ trade size knockouts and
snap on cover with 7″ quick connect wire. Luminaire includes 6″ quick connect
wire. Maximum length between luminaire and driver is 40′. For longer remote
driver remote run length, consult factory.
Mounting: No housing is required, two tensions steel spring clips secure
luminaire to ceiling. Accommodates ceiling thickness up to 3/4″. New
construction frame-in available, see mounting accessories.
Type Project Catalog No. Notes
ELECTRICAL Input Voltage: 120V Lumens / Wattage: 950lm / 12W Color Temperature: 2700K or 3000K Color Rendering Index: 90+CRI Beam Spread: 24° Spot and 40° Narrow Flood (included) Operating Temp.: 0°C to 25°C ambient temperature Lifetime: 50,000 hours @ L70 Dimming: Dimmable down to 10% with Triac or ELV Click Here or check complete dimmer list at www.NoraLighting.com in the “Compatibility” page under “Resources” tab
Performance Data
Part Number
Lumens
CCT
NM4-R47027BB NM4-R47027MPW NM4-R47030BB NM4-R47030MPW
887lm 942lm 932lm 970lm
2700K 2700K 3000K 3000K
Delivered lumens will vary depending on optic
PRODUCT IMAGES AND DIMENSIONS
OPTIONAL TRIM ACCESSORIES NM4-SET: Square Trim for NM4-R470, Black or White
1-1/2″
OPTIONAL MOUNTING ACCESSORIES
NF-R246: Universal New Construction Frame-In
NFC-R430: New Construction Frame-In with Collar NM2-EW-4: 4′ Quick Connect Linkable Extension Cable
75°
NM2-EW-10: 10′ Quick Connect Linkable Extension Cable
LABELS AND LISTINGS · cETLus Listed for Damp Locations · ENERGY STAR certified
· 5-Year Limited Warranty · FCC compliant · Certified to the high efficacy
requirements of California
Title 24 JA8-2022
5YEAR LIMITED WARRANTY
24TITLE 90+
AIR
T CRI COMPLIANT DAMP IGHT
3-1/4″ 5″
2-1/8″
Cut out: 4-3/8″
3-1/4″ 3-1/2″
NM4-SET Square Trim
4″ M4 Round LED Recessed Elbow
Trim Type NM4-R470 = 4″ Round Elbow
Color Temperature Finish
27 = 2700K 30 = 3000K
BB = Matte Black MPW = Matte Powder White
NM4-R470 Trim Accessories
Accessory Type NM4-SET = Square Trim for NM4-R470
Finish
B = Matte Black MPW = Matte Powder White
Example: NM4-R47030MPW = 4″ M4 Round LED Recessed Elbow, 950lm / 12W, 3000K,
Matte Powder White
6505 Gayhart Street, Commerce, CA 90040 Tel 800.686.6672 |
www.noralighting.com | e-mail: nora@noralighting.com © 2024 Nora Lighting,
Inc. All rights reserved. Specifications subject to change without notice.
Optional Mounting Accessories
Accessory Type NF-R246 = Universal New Construction Frame-In NFC-R430 = New
Construction Frame-In with Collar NM2-EW-4 = 4′ Quick Connect Extension Cable
NM2-EW-10 = 10′ Quick Connect Extension Cable
013124P1
NM4-R470
4″ M4 Round LED Recessed Elbow Accessories
Type Project Catalog No. Notes
Square Trim for NM4-R470
New Construction Frame-In
NM4-SETB
Matte Black
NM4-SETMPW
Matte Powder White
Converts the round trim included with
NM4-R470 elbow into a square trim
NF-R375 For new construction pre-wiring and easier layout planning.
New Construction Frame-In with Collar
NFC-R430 New construction frame-in can be used to assist installing can-less
recessed downlighting.
Quick Connect Extension Linkable Cables
NM2-EW-4
4′ Cable
NM2-EW-10
10′ Cable
Use to extend the length between luminaire and
driver enclosure. Can be connected together to
create custom lengths. Maximum length between
luminaire and driver is 40′. For longer remote driver
remote run length, consult factory.
3-3/4″ 7.61″ 12″
4.25″ 7.68″ 11.94″
6505 Gayhart Street, Commerce, CA 90040 Tel 800.686.6672 | www.noralighting.com | e-mail: nora@noralighting.com © 2024 Nora Lighting, Inc. All rights reserved. Specifications subject to change without notice.
013124P2
PHOTOMETRICS
NM4-R470
4″ M4 Round LED Recessed Elbow
Test Information Test Number: NTR1871R1 Part Number: NM4-R47027MPW Beam
Spread: 24° Spot Lumens: 935lm Wattage: 11.74W Efficacy: 80lpw CCT / CRI:
2700K / 90 CRI Spacing Criteria (0°-180°): 0.42 Spacing Criteria (90°-270°):
0.42
Test Information Test Number: NTR1872R1 Part Number: NM4-R47027MPW Beam
Spread: 40° Narrow Flood Lumens: 942lm Wattage: 11.74W Efficacy: 80lpw CCT /
CRI: 2700K / 90 CRI Spacing Criteria (0°-180°): 0.66 Spacing Criteria
(90°-270°): 0.66
Test Information Test Number: NTR1875R1 Part Number: NM4-R47030MPW Beam
Spread: 24° Spot Lumens: 958lm Wattage: 11.51W Efficacy: 83lpw CCT / CRI:
3000K / 90 CRI Spacing Criteria (0°-180°): 0.42 Spacing Criteria (90°-270°):
0.42
Test Information Test Number: NTR1876R1 Part Number: NM4-R47030MPW Beam
Spread: 40° Narrow Flood Lumens: 970lm Wattage: 11.56W Efficacy: 84lpw CCT /
CRI: 3000K / 90 CRI Spacing Criteria (0°-180°): 0.66 Spacing Criteria
(90°-270°): 0.66
Polar Curve
741
1482
2223
2964
10°
Polar Curve
400
799
1199
1598
10°
Polar Curve
769
1538
2306
3075
10°
Polar Curve
413
827
1240
1654
10°
Type Project Catalog No. Notes
Illuminance at a Distance
70°
Distance from Luminaire
FC at Nadir
4′
185fc
6′ 50°
8′
82.2fc 46.2fc
10′
29.6fc
12′
20.5fc
Beam Diameter
1′-8″ 2′-7″ 3′-6″ 4′-4″ 5′-2″
30°
Zonal Lumen Summary
Zone
Lumens
0-30
721
0-40
807
0-60
899
0-90
935
90-180
0
0-180
935
% Luminaire
77 86.2 96.1 100 0 100
Candela Table
Vertical Angles
Candela
0
2958
5
2607
15
1124
25
398
35
128
45
67
Illuminance at a Distance
70°
Distance from Luminaire
FC at Nadir
4′
99.7fc
6′ 50°
8′
44.3fc 24.9fc
10′
15.9fc
12′
11.1fc
Beam Diameter
3′ 4′-5″ 5′-11″ 7′-5″ 8′-11″
30°
Zonal Lumen Summary
Zone
Lumens
0-30
697
0-40
819
0-60
912
0-90
942
90-180
0
0-180
942
% Luminaire
74 86.9 96.7 100
0 100
Candela Table
Vertical Angles
Candela
0
1595
5
1516
15
1076
25
568
35
200
45
66
Illuminance at a Distance
70°
Distance from Luminaire
FC at Nadir
4′
192fc
6′ 50°
8′
85.3fc 48fc
10′
30.7fc
12′
21.3fc
Beam Diameter
1′-8″ 2′-7″ 3′-5″ 4′-4″ 5′-2″
30°
Zonal Lumen Summary
Zone
Lumens
0-30
733
0-40
823
0-60
920
0-90
958
90-180
0
0-180
958
% Luminaire
76.6 85.9 96.1 100 0 100
Candela Table
Vertical Angles
Candela
0
3072
5
2688
15
1183
25
449
35
149
45
73
Illuminance at a Distance
70°
Distance from Luminaire
FC at Nadir
4′
103fc
6′ 50°
8′
45.9fc 25.8fc
10′
16.5fc
12′
11.5fc
Beam Diameter
2′-11″ 4′-5″ 5′-11″ 7′-4″ 8′-10″
30°
Zonal Lumen Summary
Zone
Lumens
0-30
716
0-40
841
0-60
939
0-90
970
90-180
0
0-180
970
% Luminaire
73.8 86.7 96.8 100 0 100
Candela Table
Vertical Angles
Candela
0
1651
5
1594
15
1120
25
559
35
176
45
56
Finish Multiplier Finish: Black (x0.95), Matte Powder White (x1.0)
6505 Gayhart Street, Commerce, CA 90040 Tel 800.686.6672 |
www.noralighting.com | e-mail: nora@noralighting.com © 2024 Nora Lighting,
Inc. All rights reserved. Specifications subject to change without notice.
013124P3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>