COMMSCOPE Monopole Sector V-Frame Mounts Instruction Manual

August 2, 2024
CommScope

Monopole Sector V-Frame Mounts

Product Information

Specifications

  • Manufacturer: CommScope, Inc.
  • Model: MCG22RHDX-15M12120
  • Height: 120 inches
  • Length: 180 inches
  • Width: 84 inches
  • Mass: 2667.57 lbs
  • Volume: 11510.60 cubic inches
  • Surface Area: 98019.81 square inches

Product Usage Instructions

Installation Guidelines

Before installing the product, ensure that there are no hazards
or obstructions on the climbing facility. The monopole diameter
should be between 45 to 50 OD for proper fit. Additional products
may be required to maintain safety and integrity.

Manufacturing Requirements

During installation, tighten all bolts securing flat plates
using the turn-of-nut method. U-bolts should also be tightened
using the turn-of-nut method, ensuring equal distance and force on
each leg of the U-bolt.

Packaging and Testing

The product packaging must meet CommScope requirements as per
document IS-PL-3005. Extra hardware may be supplied and packaged
separately. Testing procedures should be followed as outlined in
the user manual.

FAQ

Q: What is the maximum diameter of monopoles that this product

can fit?

A: The product is designed to fit monopoles with a diameter
between 45 to 50 OD.

Q: How should the bolts be secured during installation?

A: All bolts securing flat plates should be tightened using the
turn-of-nut method to ensure proper fastening.

Q: Are additional products required for installation?

A: Depending on the specific installation site, additional
products may be needed to maintain the integrity and safety of the
climbing facility.

4

3

1.0 GENERAL NOTES 1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X] 1.2 FOR PATENT INFO: https://www.cs-pat.com
2.0 DESIGN NOTES 2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
D 2.2 FITS MONOPOLES 45″ TO 50″ OD. MONOPOLE DIAMETER MUST BE GREATER THAN OR EQUAL
TO 45″ TO MEET ANTENNA TO ANTENNA CORNER SPACING OF >24″. 3.0 MANUFACTURING/SPECIAL REQUIREMENTS
3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
4.0 TEST 5.0 PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005. 5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER. 5.3 EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED.

C

2
REV. A

1

REVISIONS

DESCRIPTION

DATE APPROVED

INITIAL RELEASE

JL1183

CB1094

16APR24 40193542CMO

D

C

B
A 4

B

COMMSCOPE, INC. OF NORTH CAROLINA

TOLERANCES
0 PLACE X[.X] ± 0.25[6.3] 2 PLACE .XX[.X] ± 0.06[1.5] 1 PLACE .X[.X] ± 0.12[3.0] ANGLES ± 2°

SAP MATERIAL MASTER
MCG22RHDX-15M12120

FINISH

MATERIAL

UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES INTERPRET PER ANSI Y 14.5M-1994

NAME

DATE TITLE

DENSITY

lbs/in³

CE JL1183 RW JL1183

18FEB24 04/17/2024

MONO 3 SCTR FR 15′ FACE,(12) 120″ ANT

A

MASS 2667.57 lbs

VOLUME 11510.60

in³

SURFACE AREA 98019.81

in²

AD CB1094

04/22/2024

1:20 MCG22RHDX-15M12120 RE JL1183

04/22/2024

ECN 40193542CMO

SCALE DOCUMENT NO.

C 2024 CommScope, Inc. Confidential

HEIGHT 120” LENGTH 180″
WIDTH 84″

SIZE Auth Group INSL

MODEL

DRAWING

SHEET

C

VERSION
00

STATUS
RE

REVISION VERSION STATUS

A

00

RE

REVISION
A

1 OF 5

3

2

1

4

3

2

1

PART NUMBERS, WEIGHTS, & EPA

TABLE 1: CONFIGURATIONS

D

PART NUMBER

DESCRIPTION

WEIGHT (LBS)

(EPA)A (FT2)*

(EPA)A 1/2″ ICE THICKNESS ANTENNA PIPES

INCLUDED PARTS

(FT2)*

MC-RM1550-3D MCG22HDX-HK01 MCG22RHDX-SB01 XP-2525-12 XP-2525-OFF-12 SFG2204 PB12TEB0607B0615P SFG2295

D

MCG22RHDX-15M12120 MONO 3 SCTR FR 15′ FACE,(12) 120″ ANT

2667.57

20.51

28.83

12

1

1

1

1

1

3

1

3

  • (EPA)A DOES NOT INCLUDE ANTENNA PIPES AND MOUNTING HARDWARE. IF DESIRED, ADD ANTENNA PIPE PER TABLE 2

TABLE 2: EPA OF EACH ANTENNA PIPE

ANTENNA PIPE

(EPA)A (FT2)

(EPA)A W/ 1/2″ ICE THICKNESS (FT2)

2-7/8″ X120″

2.30

3.10

NOTE: 1. ANTENNA PIPES ARE CONSIDERED SEPARATELY. 2. KA FACTOR OF 3-SECTOR EPA INCLUDED. 3. COMBINE THE ASSOCIATED EPA VALUES IN THE TABLES ABOVE TO DETERMINE THE EPA OF A MOUNT MODEL WITH A LISTED MOUNT PIPE CONFIGURATION.
FOR EXAMPLE, MCG22RHDX-15M12120 HAS A 3-SECTOR EPA OF 20.51 FT2 WITH NO ICE PLUS 12 ANTENNA PIPES WITH A 3-SECTOR EPA OF 12X2.30=27.60 FT2 WITH NO ICE. SO, THE TOTAL EPA OF 48.11 FT2 FOR THE MCG22RHDX-15M12120.

C

C

B
A 4

B

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MONO 3 SCTR FR 15′ FACE,(12) 120″ ANT

A

SIZE
C
C 2024 CommScope, Inc. Confidential

SCALE
1:24

DOCUMENT NO.
MCG22RHDX-15M12120

VERSION
00

DRAWING STATUS
RE

REVISION
A

SHEET
2 OF 5

3

2

1

4 D
8
C

3

2

1

2

8

9

INSTALL FLAT WASHER ON NEAR SIDE AND LOCK WASHER ON FAR

SIDE

D

16

13

TIE BACK PIPE POSITION IS ONLY SHOWN AS REFERENCE

B

1

13 7

4 11

12

5

C

10 DETAIL B SCALE 1 : 4

B

COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;

INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.

ITEM PART NO.

DESCRIPTION

QTY. WEIGHT

1 MC-RM1550-3 15″ – 50″ OD RINGMOUNT

2 229.90 LBS

2 SFG2204

WELDMENT, BACK VERTICAL ARM MOUNT

3

36.96 LBS

3 SFG2278

ARM, STANDOFF – SFG22

6

40.92 LBS

4 XP-R

CROSSOVER PLATE, ROUND, UP TO 3.5″ OD

6

6.20 LBS

5 XP-2525

CROSSOVER PLATE KIT, 2-7/8 OD X 2-7/8 OD

12

8.37 LBS

6 XP-2525-OFF OFFSET CO PLATE KIT,2-7/8ODX2-7/8OD

12 16.64 LBS

7 XAU01

ANGLE, CROSSOVER, 1.9-3.5″ X 1.9-3.5″ OD

6

2.98 LBS

8 GB-05225

5/8″ X 2-1/4″ GALV BOLT KIT

30

0.28 LBS

9 GWF-05
A 10 GUB-53560

5/8″ GALV FLAT WASHER, 1.7OD 5/8″ X 3-5/8″ X 6″ GALV U-BOLT

6

0.06 LBS

12

1.30 LBS

11 GUB-4352

1/2″ X 3″ X 5-1/4″ GALV U-BOLT

18

0.71 LBS

12 GB-04145

1/2″ X 1-1/2″ GALV BOLT KIT

6

0.13 LBS

13 MT546084120 2.88″ OD X 84″ LONG PIPE

6

24.81 LBS

14 MT546120120 PIPE, 2.875″OD X 120″

12 35.44 LBS

15 MT546180276 PIPE, 2.875″OD X 180″

6 115.33 LBS

16 SFG2295

LABEL, SFG22RHDX

3

0.04 LBS

NOTE NO.

4

3

14 15

6 3
11

TOP
B
BOTTOM

ALLOWABLE TIEBACK ANGLE
15 DEGREES VERTICAL 25 DEGREES HORIZONTAL
15 DEGREES

25 DEGREES

25 DEGREES

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MONO 3 SCTR FR 15′ FACE,(12) 120″ ANT

A

15 DEGREES
2

SIZE
C
C 2024 CommScope, Inc. Confidential

SCALE
1:20

DOCUMENT NO.
MCG22RHDX-15M12120

VERSION
00

DRAWING STATUS
RE

REVISION
A

SHEET
3 OF 5

1

4 D
C 84 2132.1
C
B
120 3048.0
A 4

3

FITS

50 45

1270 1143

MONOPOLES

FIELD TRIM AS NEEDED
D 90.0°
63 1603.9

180 4572.0

2

1

ALLOWABLE TIEBACK ANGLE
15 DEGREES VERTICAL 25 DEGREES HORIZONTAL
15 DEGREES

25 DEGREES

25 DEGREES

15 DEGREES

42 1056.9

8 9

1 12
7

DETAIL D SCALE 1 : 4

DETAIL C SCALE 1 : 4

D
13
C
11

TOP
33 840.0

MUST BE INSTALLED WITH DIAGONALS AS SHOWN
B
32 822.3

BOTTOM

SOME ITEMS OMITTED FOR CLARITY

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MONO 3 SCTR FR 15′ FACE,(12) 120″ ANT

A

MUST BE INSTALLED WITH DIAGNALS AS SHOWN
3

SIZE
C
C 2024 CommScope, Inc. Confidential

SCALE
1:20

DOCUMENT NO.
MCG22RHDX-15M12120

VERSION
00

DRAWING STATUS
RE

REVISION
A

SHEET
4 OF 5

2

1

4
ANTENNA SPACING SHOWN
D
C
56 1422.4
B

3

2

45 1143.0 2.2
6 152.4
32 812.8

28 711.2 56 1422.4

56 1422.4

25 629.4 2.2
ANTANNA SHOWN FOR REFERENCE (NOT INCLUDED IN THIS KIT)

1 D
C B

120 3048.0

A 4

56 1422.4

28 711.2 56 1422.4
3

56 1422.4

SOME ITEMS OMITTED FOR CLARITY

COMMSCOPE, INC. OF NORTH CAROLINA

TITLE

MONO 3 SCTR FR 15′ FACE,(12) 120″ ANT

A

SIZE
C
C 2024 CommScope, Inc. Confidential

SCALE
1:24

DOCUMENT NO.
MCG22RHDX-15M12120

VERSION
00

DRAWING STATUS
RE

REVISION
A

SHEET
5 OF 5

2

1

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

CommScope User Manuals

Related Manuals