wavlink WN570HP2 High Power Outdoor Wireless AP/Range Extender User Guide
- June 3, 2024
- WavLink
Table of Contents
wavlink WN570HP2 High Power Outdoor Wireless AP/Range Extender
Hardware Overview
Primary Extender
- RP-SMA Antenna Connectors
- 3x Wi-Fi Signal LEDs
- W-Fi LED
- WAN/LAN LED
- POWER LED
- Reset Button
- WAN/LAN Port (POE)
- Grounding Terminal
Default Parameters
Web: http://wifi.wavlink.com Default IP: 192.168.10.1 Login Password: admin
Ws-WN570HP2
2.4G SSID: WAVLINK-N Wireless Key: no
Led Indicators
WI-FI Signal
ASSEMBLY
OPTION ONE LAN to Wi-Fi Extension Quick Setup
Recommend for big yard
Installation Options
Option I. Fasten the holder to the wall with screws.
Option II. Fasten the holder to the post.
Installation Instruction
A1. Fasten the main body holder.
A2. Screw the connecting cable into the antenna connector and screw up
the connector.
A3. Connect one end of an Ethernet cable to “POE” port of POE converter
A4. Connect one end of an Ethernet cable to “LAN DATA IN” port of POE
converter, and connect the other end to a “LAN” port of your router.
A5. Plug in the power connector to the “DC24V” port of POE converter,
then plug the power adapter into an electrical outlet.
A6. Push the “ON/OFF” button on the POE converter to power on.
ATTENTION:
- Make sure to use a certified CAT5e/CAT6 Ethernet cable with RJ45 connectors.
- Make sure the length of the Ethernet cable is less than 80 meters (262 ft.).
- Please make sure the diameter of the post is between 0.025m and 0.1m.
A7. Connect to the Device
For Windows User
-
Unplug the Ethernet cable from your computer (if any).
-
Click the Wireless Network Connection icon on your taskbar.
Wi-Fi: On Turn Wi-Fi Off -
Click the refresh icon and connect to the device’s network: WAVLINK-N. WAVLINK-N
For Mac oS X User
- Unplug the Ethernet cable from your computer (if any).
- Click the Wi-Fi icon in the top right corner of the screen, and connect to the device’ s network: WAVLINK-N.
A8. Launch a web browser and type http://wifi.wavlink.com in the address
field. Enter admin(all lowercase) to login. .
If the login window does not pop up, please refer to the FAQ>Q1.
A9. Launch a web browser and type
http://wifi.wavlink.com in the address field, then create a new password and
click “Next”
A10. Click “Wizard”.
A11. Click “AP (LAN Bridge) “.
For Signal Band (2.4G) User
A12. Choose a Security Type.
A13. Enter your password for your extended network.
Change Login Password
NOTE: The default login password of the device is “admin”, We strongly recommend you change the default login password.
-
Launch a web browser and type http://wifi, wavlink.com in the address field. Enter admin(all lowercase) to login.
If the login window does not pop up, please refer to the FAQ>Q1. Engish Login -
Click “Setup-> Login Password”.
-
Enter the old password, then enter the new password and click “Apply”.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>