Sofucor KBS-5247 52 Inch Ceiling Fan User Guide

USE AND CARE GUIDE
KBS-5247 Installation Guidehttps://youtu.be/yJOLuncgBmI

Safety Information

1. To reduce the risk of electric shock, ensure the electricity has been turned off at the circuit breaker or fuse box before you begin.

2. All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.

3. The outlet box and support structure must be securely mounted and capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet boxes marked
   “Acceptable for Fan Support of 35 lbs. (15.9 kg) or less”.

4. The fan must be mounted with a minimum of 7 ft. (2.1 m) clearance from the trailing edge of the blades to the floor.

5. Do not operate the reversing switch while the fan blades are in motion. You must turn the fan off and stop the blades before you reverse the blade direction.

6. Do not place objects in the path of the blades.

7. To avoid personal injury or damage to the fan and other items, use caution when working around or cleaning the fan.

8. Electrical diagrams are for reference only. Light kits that are not packed with the fan must be Ul-listed and marked suitable for use with the model fan you are installing.
   Switches must be UL General Use Switches.
   Refer to the instructions packaged with the light kits and switches for proper assembly.

9. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.

10. All setscrews must be checked and re-tightened where necessary before installation.

WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.
WARNING: To reduce the risk of fire or electric shock, this fan is NOT suitable for use with solid-state speed controls.
WARNING: To avoid possible electrical shock, make sure that the electricity is turned off at the main power box before starting work. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician.
WARNING: Electrical diagrams are for reference only. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan
WARNING: To reduce the risk of fire, electrical shock or personal injury, ensure that the fan mounting bracket is supported directly from the building structure or the outlet box marked “Acceptable for Fan Support of 35 lbs. (15.9 kg) or less”. Use only the screws provided with the outlet box.

Warranty

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and  aterial at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and re-installing the product are your responsibility. Damage to any part such as by accident, misuse, improper installation, or by affixing any accessories, is not covered by this warranty.
Because of varying climatic conditions this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty.
Sofucor hereby disclaims any and all warranties, including but not limited to those of merchant ability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a limitation on how  long an implied warranty lasts, so the above limitation may not apply to you.
The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer.

**Two ceiling installation methods

**

Concrete Ceiling Mounting Bracket

Hanger for Junction Box Mounting Bracket Wooden ceiling Mounting Bracket

Accessory drawing

Installing of downrod

https://youtu.be/yJOLuncgBmI

07 Assembly-hanging the Fan ( continued )

WARNING:Remove the rubber motor stops on the bottom of fan before installing the blades or testing the motor.
WARNING: Turn off the electric power during installation and making wire connection.

1. Connect the wire which from ceiling fan into the receiver.
2. Connect the wire from receiver with the wire from house.

Installation procedure

Use of remote control

1. ALL OFF : Turn off the lights and fans at the same time
2. Light up/Light on/off/Lights dimmed
3. Warm light / Neutral light / White light
4. 6 Speed Settings
5. F / R : Changing fan run direction ( 15 sec )
6. Natural wind
7. Timer : It will turn off the light and the fan when the time is over

Note: the remote control must match the same code receiver
After the reversible button is pressed, the fan slowly slows down to a stop. And then it started to reverse.

Match code

if it does not work

1. Turn on the main switch.
   

2. While turning on the main switch, press and hold the remote switch for 5 seconds.

3. Hear the beep, the code is successful

Adjusting and balancing your ceiling fan blades

Slide the balancing clip on the trailing edge of any blade, halfway between the holder and tip. Run the fan to check the wobble. If the wobble persists, repeat with each blade, noting which one most reduced the wobble.
Slide the clip in small increments away from the center of that blade. Move the clip, operate the fan, then move it again until you eliminate as much wobble as possible.
Stick the adhesive-backed balancing weight on the top center of the blade directly in line with the balancing clip.Add more weight if needed to get a smooth-running fan.

Care and Cleaning

WARNING : Make sure the power is off before cleaning your fan.

• Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling.
• Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing.
• You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a light application of shoe polish.
• You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings.

Trouble shooting

❑Check the line wire connections to the fan and switch wire connections in the switch housing.
The fan is noisy.| ❑Ensure all motor housing screws are snug.
❑Ensure the screws that attach the fan blade bracket to the motor hub are tight.
❑Ensure the wire nut connetions are not ratting against each other or the interior wall of the switch housing.
❑Allow a 24-hour “breaking in” period. Most noises associated with a new fan disappear during this time.
❑If you are using the Ceiling Fan light kit,ensure the screws securing the glassware are tight.Check that the light
❑bulbs are also secure.
❑Ensure the canopy is a short distance from the ceiling.lt should not touch the ceiling.
❑Ensure your outlet box is secure and rubber isolator pads wereused between the mounting plate and outlet box.
The fan wobbles.| ❑Please check and follow the instructions: Chapitre No.11 Fan balance on page 14.

If you have any questions, please contact us. We will help you solve any problem.
Email:sofucor_service@163.com
Email:sofucorceilingfan@163.com
www.sofucorfan.com
Questions or Support?
Email:sofucor_service@163.com
Email:sofucorceilingfan@163.com
www.sofucorfan.com

References

• Sofucor Official Store - Online Wood Ceiling Fans Shopping Mall

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>