childcare 097444 Convertible Learning Tower Instruction Manual
- July 31, 2024
- childcare
Table of Contents
2-in-1 Convertible
Learning Tower
**Model # 097444
**
IMPORTANT : RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
SAFETY PRECAUTIONS
Read all instructions before assembly and use of the 2-in-1 Convertible Learning Tower. Keep instructions for future use.
WARNING
BEFORE USE OF THE PRODUCT, READ AND UNDERSTAND THE INSTRUCTIONS. NEVER LEAVE
THE CHILD UNATTENDED.
CHILD MUST A LWAYS BE SUPERVISED WHEN USING THIS PRODUCT.
A LWAYS USE THIS PRODUCT ON A FLAT AND LEVEL FLOOR.
DO NOT PLACE THIS PRODUCT NEAR A WINDOW AS IT CAN BE USED AS A STEP BY A CHILD
AND CAUSE THE CHILD TO FALL OUT OF THE WINDOW.
DO NOT PLACE THIS PRODUCT NEAR A WINDOW WHERE CORDS FROM BLINDS OR CURTAINS
COULD STRANGLE A CHILD.
BE AWARE OF THE RISK OF OPEN FIRES AND OTHER SOURCES OF STRONG HEAT IN THE
VICINITY OF THE PRODUCT.
REMEMBER TO INSPECT THIS PRODUCT REGULARLY FOR WEAR OR ACCIDENTAL DAMAGE AND
FOR THE SECURITY OF COMPONENTS.
ALL ASSEMBLY FITTINGS SHOULD ALWAYS BE TIGHTENED PROPERLY.
DO NOT USE THE PRODUCT IF ANY PART IS BROKEN, TORN OR MISSING AND USE ONLY
SPARE PARTS APPROVED BY THE MANUFACTURER.
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
SUITABLE FOR CHILDREN FROM 18 MONTHS OF AGE UP TO 20KGS.
ASSEMBLY TO BE CARRIED OUT BY A COMPETENT ADULT ONLY.
DURING ASSEMBLY CHILDREN SHOULD BE KEPT AWAY FROM THE PRODUCT DUE TO POSSIBLE
RISK OF INJURY.
ADULT ASSEMBLY REQUIRED.
THIS PACKAGE CONTAINS SMALL PARTS.
FOR YOUR CHILD’S SAFETY, DO NOT LET YOUR CHILD PLAY WITH THE PRODUCT UNTIL IT
IS FULLY ASSEMBLED.
EN 17191: 2021
CONGRATULATIONS
Congratulations on your purchase of the 2-in-1
Convertible Learning Tower.
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully
before using this product and keep it in a safe place for future reference.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your 2-in-1 Convertible Learning Tower
Due to variations in the style and design of our products, the photographs and
illustrations shown in this instruction manual are generic, therefore product
fabrics, colour and design may vary from images shown.
CNP Brands reserves the right to alter product specifications without notice
as a result of our ongoing policy of product improvement.
ASSEMBLY CONTENTS
Check what you have received…
You have received 1 box. Please check the contents of the box against the list
below. If anything is missing, please contact Customer Service.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Check what you have received…
You have received 1 box. Please check the contents of the box against the list
below. If anything is missing, please contact Customer Service.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wain
house Distribution on 0800 567 5000.
Assembly kit:
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble…
1| 1a.| Assemble one end of Seat Panel to the inside of 1 x Large Side Board
using 2 x 44mm Bolts.|
---|---|---|---
1b.| Assemble one end of Back Panel to the inside of the same Large Side Board
using 2 x 44mm Bolts.|
2| 2a.| Assemble remaining ends of Back Panel and Seat Panel to the remaining
Large Side Board using 4 x 44mm Bolts.|
3| 3a.| Carefully slide the Top Board panels in between the assembled Large
Side Boards ensuring the larger of the two boards is on the top.|
3b.| Assemble the smaller of the Top Board Panels to both Large Side Boards
using 6 x 44mm Bolts.
4| 4a.| Place 1 x Small Side Board on top of Large Side Board, ensuring it
aligns with the larger Top Board Panel.|
4b.| Secure Small Side Board to the larger Top Board using 3 x 44mm Bolts.
5| 5a.| Assemble 2 x Bars to the top of assembled Small Side Board using 2 x
44mm Bolts.|
5b.| Place remaining 1 x Small Side Board on top of remaining Large Side
Board, ensuring it aligns with the larger Top Board Panel.
5c.| Secure Small Side Board to the larger Top Board using 3 x 44mm Bolts.
6| 6a.| Attach the remaining ends of the 2 x Bars to the Small Side Board
using 2 x 44mm
Bolts.|
6d.| Secure 2 x Feet to the back of Large Side Boards using 2 x 44mm Bolts per
Foot.|
7| 7a.| Secure 2 x locks to secure Learning Tower.|
To convert to Desk Mode…
1| 1a.| Un-clip the 2 x locks to release frame.|
---|---|---|---
1b.| Carefully lower the top section of the Learning Tower backward to form
the desk.
1c.| Secure 2 x locks to secure desk mode.|
HOW TO CARE FOR YOUR CHILDCARE PRODUCT
Cleaning
To ensure the long-lasting use of your product, wipe down with warm water
and a soft absorbent cloth when required. Do not use abrasive cleaners.
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners
– tighten or replace if required. To maintain the safety of your product, seek
prompt repairs for bent, torn, worn or broken parts. Use only those parts and
accessories approved by CNP Brands.
If you have any difficulties in assembling this product, please contact our
Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.
Warranty
For all warranty terms and conditions, please visit cnpbrands.com.au
NOTES…………………….. ……………………….
Distributed in Australia by CNP Brands
82 Maribyrnong Street, Footscray, VIC, 3011
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: info@cnpbrands.com.au
F: www.facebook.com/CNPBrands
I: @cnp_baby| Distributed in New Zealand by Wainhouse
Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000
E: helpline@wainhousedist.co.nz
---|---
Documents / Resources
|
childcare 097444 Convertible Learning
Tower
[pdf] Instruction Manual
097444 Convertible Learning Tower, 097444, Convertible Learning Tower,
Learning Tower, Tower
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>