childcare 013530-002 Mooc Jogger Stroller Instruction Manual
- June 4, 2024
- childcare
Table of Contents
013530-002 Mooc Jogger Stroller
Instruction Manual Moov
Jogger Stroller “Black” Model # 013530-002
IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
SAFETY PRECAUTIONS
Read all instructions before assembly and use of the stroller. Keep
instructions for future use.
WARNING
TO AVOID INJURY OR DEATH: ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS
STATIONARY. DO NOT LEAVE THE CHILD UNATTENDED. SECURE THE CHILD IN THE HARNESS
AT ALL TIMES. DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER. MAKE SURE
CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE STROLLER. TO AVOID
INJURY ENSURE THAT YOUR CHILD IS KEPT AWAY WHEN FOLDING AND UNFOLDING THE
STROLLER. ENSURE THAT ALL LOCKING DEVICES ARE ENGAGED BEFORE USE.
Be aware that moving parts may cause injury if care is not taken.
Fingers or parts of the body could be injured when the stroller is folded or
unfolded. Please use caution when folding or unfolding the stroller.
- Always check that safety locks are engaged before placing a child in the stroller.
- Ensure your child is secured with a correctly adjusted safety harness.
- Do not allow children to stand in their seats.
- Do not hang bags or goods from the handle as this could cause the stroller to tip over.
- Do not place more than 5kgs in the basket.
- Do not place more than 1kg on the removable top parent tray.
- The weight of the child using the product should not exceed 20kgs.
- The height of the child using the product should not exceed 96cm.
- It is unsafe to use parts other than those approved by the manufacturer.
- Never ride with more than one child in the stroller.
- Regularly inspect all parts and locking devices, and promptly replace worn-out or broken parts.
- Remove the child from the stroller before going up or down stairs and escalators.
- To prevent the risk of the stroller catching fire, do not park it near an open fire, heater or barbecue.
- Do not make any changes, repairs or alterations to this product, unless through an approved service agent.
- To avoid the risk of suffocation, keep all plastic packaging materials out of reach of children.
- Never leave the safety harness connected when not fitted to a child in the stroller as this may create loops that could cause a strangulation hazard.
- The vehicle is designed for use on flat or gently sloping surfaces and may be unstable on higher-sloping and uneven surfaces, and users should be made aware of the possibility of the vehicle tipping over.
- Ensure the storage latch is fully engaged when lifting or carrying the stroller.
- Care must be taken when lifting or carrying the stroller.
- Tyres should be inflated to 20-25 psi.
CONGRATULATIONS
Congratulations on your purchase of the Childcare Moov Jogger Stroller.
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully
before using this product and keep it in a safe place for future reference.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Moov Jogger Stroller
Due to variations in the style and design of our products, the photographs and
illustrations shown in this instruction manual are generic, therefore product
fabrics, colour and design may vary from the images shown. CNP Brands reserves
the right to alter product specifications without notice as a result of our
ongoing policy of product improvement.
ASSEMBLY CONTENTS
Check what you have received…
You have received 1 box. Please check the contents of the box against the list
below. If anything is missing, please contact Customer Service.
InAustralia,contact CNP Brands on 1300 667 137,in New Zealand contact
Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Stroller frame, with the following components pre-assembled on frame:
- Canopy
- Five-point safety harness
- Basket
- Seat lining
- Front Wheel Front Tray
There are no accessories recommended for use with this Childcare Stroller.
ASSEMBLY / OPERATING INSTRUCTIONS
Unfolding the stroller…
1a. Position the stroller frame on a stable floor.
1b. Lift the stroller up-lock by unhooking it from the latch. (highlighted in
the image)
2a. Lift the stroller handle to unfold the stroller.
2b. The stroller should then lock into position.
2c. This can be determined by a clicking sound once unfolded.
To operate Swivel Function…
1a. To lock the swivel wheel, push the lever up.
1b. To unlock swivel wheels, push the lever down.
To assemble Rear Wheels…
1a. Lay the Stroller on its side.
1b. Insert Rear Wheel Axle into Stroller Axle Housing until it clicks’ into position and is secure. 1c. Turn the Stroller over and repeat for the remaining Rear Wheel. 2a. Before each use of the stroller, ensure all tyres are adequately inflated to 20-25 psi. 2b. After use, return the type Pump to the storage bag inside the basket. **To operate Rear Brakes… ** 1a. To lock the brakes, push down on the link brake bar. 1b. To release brakes, lift up the link brake **bar. CAUTION:** Always apply the brakes when parking the stroller. **To attach the Child Tray… ** 1a. Insert the left side of the ChildTray into the left Tray slot on the front of the Stroller until it
clicks’ into place.
1b. Rotate Tray down so that the right side slots down onto the right side
Tray slot and is secure.
2a. To remove ChildTray, hold the release button on the right side of the Tray
and lift up and rotate away from the Tray slot.
3a. To completely remove ChildTray from the Stroller, repeat step 2a.
3b. Undo and remove the 4 x screws on the left side of the tray attachment arm
using a Philips Head Screwdriver (not supplied).3c. Remove the plastic cover
from the tray
attachment arm.
3d. Activate the push-pin whilst pulling the tray away from the stroller.
3e. Re-attach the plastic cover to the inside of the tray attachment arms
using the 4 x screws.
Adjusting the Backrest…
This stroller has a multiple-position adjustable backrest. The upright
position on the backrest is not suitable for use with children less than six
months old.
For use with a newborn (0 – 6 months),the seat should be fully reclined. The
backrest should only be adjusted to a more upright position as the child grows
older and is able to support their head without assistance.
To Lower
1a. Squeeze both sides of the backrest adjuster and pull the seat down to
the desired position.
CAUTION: Do not adjust the backrest while the child is in the stroller.
To Raise
2a. Hold the bottom of both straps whilst squeezing both sides of the backrest
adjuster and moving up to the desired position.
To adjust the Handle…
1a. The handle has 10 adjustable positions. To adjust the handle, push in
and hold the handle adjustment buttons whilst lifting or lowering the handle
to the desired position.
1b. Release buttons to lock into place.
To use Canopy…
1a. To open the Canopy, pull forward toward the front wheel.
1b. To close the Canopy, push back towards the handle.”
Using the Tether Strap…
1a.Ensure tether strap is used at all times.
1b. Make sure your hand is fed through the loop as shown in the diagram.
WARNING
USE THIS STRAP TO STOP THE STROLLER FROM ROLLING AWAY
The stroller is now ready for use.
Restraints – Harness…
To secure the harness, insert each clip into the corresponding slot in the
harness buckle.
Once all are attached, carefully adjust the harness straps by pulling each
slider until the desired fit is achieved in the lap, shoulder and crotch
straps.
To release the buckle, press the centre buttons.
CAUTION: Always adjust the harness when changing the seating position of
the child.
Adjust Harness and Shoulder Straps…
1a. To adjust straps, hold the strap with one hand and slide the adjuster up
or down the strap.
1b. Sliding the adjuster down will loosen the strap while sliding the adjuster
up will tighten the strap.
To fold Stroller…
1a. Before folding the stroller, close the canopy and ensure the seat is in
the full recline position.
1b. Simultaneously pull each folding trigger located on the sides of the
stroller handle above the canopy. 1c. Lower the handle down until the stroller
is completely folded.
1d. Ensure the folding up-lock is engaged to ensure the stroller stays folded.
NOTE: Care must be taken when lifting or carrying the stroller. Ensure
the storage latch is fully engaged when lifting or carrying the stroller.
HOW TO CARE FOR YOUR CHILDCARE STROLLER
Cleaning
To ensure the long-lasting use of your stroller, dry it with a soft absorbent
cloth after use in rainy weather. Use a damp cloth to clean the frame. Do not
use abrasive cleaners. After using your stroller on the beach, clean the frame
and wheels thoroughly with water to remove the sand and salt. Allow it to dry
thoroughly. Removable and non-removable fabric covers and trims may be cleaned
using a damp cloth with soap or mild detergent. Allow it to dry completely
before folding or storing it away. Do not dry clean, or use bleach on fabrics
or trims. Do not machine wash, tumble or spin dry, unless the care labelling
on the product permits these methods.
Maintenance
Check the stroller regularly to ensure that locking devices and components are
secure and working properly. Always check parts regularly for tightness of
screws, nuts and other fasteners tighten or replace if required. To maintain
the safety of your stroller, seek prompt repairs for bent, torn, worn or
broken parts. Use only those parts and accessories approved by CNP Brands. If
the wheels squeak, use silicone-based spray or light oil ensuring it
penetrates the wheel and axle assembly. To prevent mould or mildew,do not fold
or store the product if it is damp or wet. Allow it to dry thoroughly. Always
store the product in a well-ventilated area and away from direct sunlight.
If you have any difficulties in assembling the stroller, please contact our
Service Department. In Australia, contact CNP Brands on 1300 667 137, in New
Zealand contact Wainhouse Distribution on 0800 567 5000.
Warranty
For all warranty terms and conditions, please visit cnpbrands.com.au
ABOUT US
About CNP Brands
Currently, CNP Brands boasts one of the most diverse brand portfolios with a
combination of company-owned brands and distribution agreements. These include
distribution lines for Evenflo, Good Baby, Lascal, Maclaren, Project Nursery,
Summer Infant and Yookidoo. Our own brands, including Childcare, have gone
from strength to strength in recent years. Childcare, and our premium brand
Bebe care, demonstrate our commitment to quality and continuing investment in
product development.
Distributed in Australia by CNP Brands
82 Maribyrnong Street, Footscray, VIC, 3011 Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: info@cnpbrands.com.au
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse
Distribution 2-6 Argyle St, Morningside, PO Box 41-014
St Lukes, Auckland, New Zealand
Customer Service: 0800 567 5000
E: helpline@wainhousedist.co.nz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>