Roco 7310032 Diesel Loko Motive Instructions
- July 31, 2024
- Roco
Table of Contents
Roco 7310032 Diesel Loko Motive Instructions
Working with etched Labels
Please note! To achieve proper mounting of the enclosed etched labels will
you please follow these instructions:
As delivered the etched label surface is completely covered with paint. To
make the metal numbers and letters visible the paint must be removed from the
actual letter and numeral surfaces: this is done as follows:
- Before removing the labels from the etched frame place them with their backs on a firm and completely level surface.
- Remove the paint from the surface of the characters carefully either with the ROCO rubber (art. no. 10002) a sharp knife having a straight edge or similar object (e.g. single-edge razor blade). Take care that while doing this the paint surface between the characters is not damaged.
- If the result is not satisfactory it is recommended that the remaining paint is removed with a suitable paint remover. Thoroughly dry the labels and then reapply fresh paint. Repeat the removal of the paint from the surface of the characters after the new paint is completely dry.
- Carefully extract the different labels from their etching frames and remove any remaining burrs.
- Attach the etched labels with very small amounts of adhesive on top of the printed signs on the vehicle.
**ROCO wishes you lots of pleasure with your new model.
**
collar
Documents / Resources
| Roco
7310032 Diesel Loko
Motive
[pdf] Instructions
7310032, 7310032 Diesel Loko Motive, Diesel Loko Motive, Loko Motive, Motive
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>