AUKEY MagFusion Dash Pro Qi2 Magnetic Fast Wireless Charging Phone Mount User Manual

AUKEY MagFusion Dash Pro Qi2 Magnetic Fast Wireless Charging Phone Mount

Specifications

• Model: HD-MC13A
• USB-C in: 5V 3A / 9V 3A
• Wireless Charging: 5W, 7.5W, 10W, 15W (Max)
• Operating Temperature: 0~35°C / 32~95°F
• Storage Temperature: -20~60°C / -4~140°F
• Dimensions: 100.4 x 63 x 63mm / 3.95” x 2.48” x 2.48”
• Weight: 105g

Frequently Asked Questions

Q: What phones are compatible with this charger?

A: The charger is compatible with Qi-enabled phones and can also work with phones that have wireless charging cases.

Q: Can I charge multiple devices simultaneously?

A: The charger is designed to charge one device at a time for optimal performance.

Q: How can I check if my phone is charging correctly?

A: Ensure proper alignment of your phone on the mount and look for the charging indicator to confirm successful charging.

Installing the phone mount

1. Snap the joint ball along with the nut into the slot.

2. Screw the nut and select a suitable position.

3. Properly clip the product to the air vent and adjust the pivot arm for stable holding.

Charging Your Phone

• The cooling system will automatically work when connected with the phone, and stop once disconnected.

Note

This wireless charger can provide magnetic alignment for iPhone 12/13/14/15 series.

• This wireless charger is able to provide fast charging up to 15W for iPhone 12 and later models running on iOS 17.2 or higher.
• Charger above 45W (not included) is recommended for better performance.

Product Care and Precautions

• Keep away from liquids and extreme heat.
• Do not leave it in humid, extremely hot or cold place for a long time.
• It is normal for the device to heat up slightly when charging. If it gets too hot to operate, stop charging immediately.
• The body and internal electronic components may break down, leading to an accident such as fire or electric shock. Do not disassemble or modify.
• When disposing of this product, follow the instructions of each local government and dispose it correctly.

Warning

• Do not place anything other than compatible devices on top of this product.
• Charging while there is an object (especially metal) between the product and a device may cause heat or fire. Remove the case or smartphone ring that contains metal before charging.
• If you use a cardiac pacemaker, consult your doctor before using this product.
• Do not bring magnetic cards (credit cards, cash cards, etc.) close to the product. Please note that we are not responsible for any damage to card data due to the influence of magnets.
• This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Warranty & Customer Support

For questions, support, or warranty claims, please contact your seller directly.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Specifications

• Model
  HD-MC13A

• Input
  USB-C in: 5V 3A / 9V 3A

• Output
  Wireless: 5W, 7.5W, 10W, 15W (Max)

• Operating temperature
  0~35℃ / 32~95℉

• Storage temperature
  -20~60℃ / -4~140℉

• Dimensions
  100.4 x 63 x 63mm /
  3.95” x 2.48” x 2.48”

• Weight
  128g / 4.52oz

Follow Us to Unlock More about AUKEY

Model: HD-MC13A
Aukey Technology Co., Ltd.
www.aukey.com | support@aukey.com
Room 116, Kangli Information Valley Building, Shanglilang Community, Longgang District, Shenzhen, Guangdong, 518111, China
FCC ID：2ATIH-HD-MC13A
Made in China

References

• AUKEY Official | Unlock More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>