sanag D50S Pro ANC Bluetooth Headset User Guide

sanag D50S Pro ANC Bluetooth Headset

Specifications

• Name: ANC Bluetooth headset
• Model: sanag D50S Pro
• Bluetooth Version: V5.3
• Connection Range: 10m
• Input: 5V 500mA
• Battery Capacity: 1000mAh/3.7V, 3.7wh
• FCC ID: 2A6MS-D50
• CMIIT ID: 24J44X828201

Product Overview

• ANC On/off Talking microphone
• Charging port
• Indicator light
• Volume plus/Next key
• On/Off/Pause/Play key
• Volume down/Up key

product overview

Key function operation

1. On/off
   • Power on: long press the switch button for 3S, the ice blue light flashes.
   • Off: Long press the switch button for 3S, the ice blue light is on for 2 seconds.
   • Automatic shutdown over time: the headset is not connected to the mobile phone, and it will automatically shut down after 5 minutes with the ice blue light flashing.
2. Pattern/pairing
   • Re-pair (restore factory Settings) : Hold down the “+” and “-” keys for 5 seconds at the same time to forcibly enter and restore factory Settings
   • Turn off after setting; The ice blue light is blinking.
   • Enter the pairing state with the phone: no pairing starts, automatically enters, and the ice blue light flashes.
   • Usb audio: Insert type-C cable, automatically turn off Bluetooth, enter the shutdown state.
   • External microphone: Insert the external microphone, and the wired Bluetooth state can be used normally.
   • Voice Assistant: Press the on/off key three times to turn on the voice assistant (click the on/off key to exit the voice assistant).
3. ANC model
   • ANC noise reduction: The default mode is music, click ANC to enter ANC noise reduction mode, and then click ANC to switch to transparent mode.
4. Music player
   • Music play/pause function: click the switch button.
   • Previous track: Long press the – key 2S to switch the previous track.
   • Next track: Long press + 2S to switch to the next track.
   • Volume increase: Click the + key.
   • Volume reduction: Click the – key.
5. Talk
   • Answer a call: Click the switch button.
   • Reject incoming calls: Press and hold the switch button for 2 seconds.
   • Hang up: During a call, double-click the key to hang up the call.
6. Charge
   • Low power warning: When the headset battery is insufficient, it will prompt a low power alarm tone every 5 minutes, and the ice blue light will flash every 10 seconds.
   • Charging state: ice blue light is on, full light is off.

Bluetooth operation

Bluetooth connection is successful

1. The headset enters Bluetooth mode, search for the Bluetooth pairing name “sanag D50S Pro” on the mobile phone, and click Connect.
2. Automatically connect back to the mobile phone, can automatically connect back to the connected device, pairing status ice blue flashing, pairing successful, light off.

Bluetooth disconnected

1. Manually turn off the Bluetooth of the mobile phone, and the headset enters Bluetooth pairing mode.
2. Disconnect the headset from the phone after overdistance, return to the effective distance range within 5 minutes, and can connect the phone normally, more than 5 Minutes will automatically shut down.

Specifications

• Name：ANC Bluetooth headset
• Model：sanag D50S Pro
• Bluetooth Version：V5.3
• Connection range：≥10m
• Input：5V 500mA
• Battery capacity: 1000mAh/3.7V,3.7wh
• FCC ID：2A6MS-D50
• CMIIT ID：24J44X828201

Matters needing attention

• Do not use abrasive cleaners to clean this product.
• Do not allow this product to be heated or close to a fire source, such as a cooking stove.
• Do not expose the product to direct sunlight for a long time.
• Do not discard this product in fire to avoid explosion.
• Do not attempt to disassemble this product to make any modifications, as it does not contain any maintenance components.
• Do not use this product in rain.
• If you do not plan to use this product for a long time, please store it in a dry environment and charge the headset at least once a month to extend its life and avoid extreme temperatures and dust.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>