nedis CATR1024BK Bluetooth FM Audio Transmitter Instruction Manual

: July 31, 2024
: nedis

Table of Contents

nedis CATR1024BK Bluetooth FM Audio Transmitter
Specifications
Product Usage Instructions
Intended use
Safety instructions
Installing the product (image B)
Connecting the product to FM radio
Pairing the product to Bluetooth® device
Playing music
Controlling the music
Activating voice assistant
Making phone calls
Charging your devices
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nedis CATR1024BK Bluetooth FM Audio Transmitter

Specifications

Product Name: CATR1024BK Transmitter
Microphone: Yes
LED Display: Yes
MicroSD Card Slot: Yes
USB Music Input: 1.0 A
USB Charging Port: 2.4 A
USB-C Charging Port: Yes

Product Usage Instructions

Main Parts

Microphone: Used for voice input.
LED Display: Shows information and settings.
Call / Play / Pause Button: Controls call and media playback.
Folder Button: Used for navigating folders.
Channel Button: Adjusts transmission frequency.
USB Music Input: For connecting external music sources.
Up Button: Increases settings or volume.
Down Button: Decreases settings or volume.
MicroSD Card Slot: For playing music from a memory card.

Safety Instructions

WARNING: Follow all safety precautions mentioned in the manual.

Installing the Product

Plug the auxiliary power plug into an auxiliary power outlet as shown in Image B.

Connecting to FM Radio

Tune your car radio to an unused FM frequency.
Press the channel button to select a transmission frequency.
Use the up or down buttons to match the transmission frequency to the car radio frequency.

Pairing and Music Playback

Select CATR1024BK from available devices for pairing.
To play music from a MicroSD card or USB flash drive, insert the media, and it will play automatically.

Activating Voice Assistant

Press the voice assistant button to activate voice assistants like Siri or Google Assistant on your mobile phone.

Making Phone Calls

When receiving a call during music playback, use the call button to answer or end the call.

Charging Devices

Connect your device to the USB or USB-C port for charging when the car engine is on.

Disposal

Dispose of the product at designated collection points and do not mix with household waste.

Intended use

This product is an FM transmitter that transmits Bluetooth® audio signal over a selected FM frequency that can be received by any FM car radio.
The product has a built-in microphone for making hands-free calls and the integrated USB charging port can be used to charge any device.
The product is intended for indoor use only. Any modification of the product may have consequences for safety, warranty and proper functioning.
The product is not intended for professional use.

Main parts (image A)

Microphone
LED display
Call / Play / Pause button
Folder button
Channel button
USB music input (1.0 A)
Up button
Down button
MicroSD card slot
Voice assistant button
Auxiliary power plug
USB charging port (2.4 A)
USB-C charging port

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
Do not open the product, there are no user serviceable parts inside.
Do not drop the product and avoid bumping.
Do not immerse the product in water or other liquids.
Do not expose the product to water, rain, moisture, or high humidity.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Be careful when using the product while driving. Always focus your attention on the road.
Disconnect the product from the power source before cleaning.
Do not use aggressive chemical cleaning agents when cleaning the product.

Installing the product (image B)

Plug the auxiliary power plug Aw into an auxiliary power outlet.

Connecting the product to FM radio

Tune your car radio to an unused FM frequency.
Press the channel button A5.
Press the up or down button A78 to match the transmission frequency to the car radio frequency.

Pairing the product to Bluetooth® device

Enable Bluetooth® on the device you want to pair the product with.
Select “CATR1024BK” from the list of available Bluetooth® devices on your device.

If the product has already been paired with another device, make sure that device is switched off or Bluetooth® is disabled.

Playing music

To stream music from the product to the FM radio, choose one of the following options:

Play music directly from the mobile device that is connected to the product via Bluetooth.
Insert a microSD card (not included) into the microSD card slot A 9.
Insert an USB flash drive (not included) into the USB music input (1.0 A) A 6.

Music from the MicroSD card or USB flash drive plays automatically.

Controlling the music

Press the call / play / pause button A 3 to play or pause music.
Press the up button A 7 to go back to the previous song.
Press the down button A 8 to skip to the next song.
Press and hold the up button A7 for 2 seconds to increase the volume.
Press and hold the down button A 8 for 2 seconds to decrease the volume.

Activating voice assistant

Press the voice assistant button Aq to activate the voice assistant on your mobile phone (Siri or Google Assistant).

Making phone calls

When a call comes in while playing music, the product will automatically switch to telephone mode.

Press the call/play/pause button A 3 to answer or end a phone call.
Press and hold the call/play/pause button A3 for 3 seconds to reject a call.
During a call, press and hold the call / play/pause button A 3 for 3 seconds to switch the call audio from the car speakers to your mobile device.
Press the call / play/pause button A 3 twice to dial the number that was last dialed.

Charging your devices

Connect your device with a USB cable (not included) to the USB port Ae or USB-C port Ar. The product automatically starts charging your device when you switch on the car engine.

Disposal

The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible for the waste management.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product CATR1024BK from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/CATR1024BK#support

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands
service@nedis.com