AMEWI 25344 Fight Star Battle Drone Set Instruction Manual

: July 30, 2024
: AMEWi

FIGHT BATTLE DRONE STAR

FIGHT STAR BATTLE DRONE
25344, 25345, 25346, 25347
OPERATION MANUAL

25344 Fight Star Battle Drone Set

Welcome to AMEWI
The Amewi Trade GmbH is an international import- and wholesale company for R/C models, toys and creative items, located in Borchen near Paderborn, Germany. Our product range includes over 10,000 items. Above all, this includes remote- controlled car, helicopter, boat, and tank models as well as a wide range of accessories and all necessary spare parts. Our sales network includes over 700 specialist dealer and online retailers across Europe.
The company AMEWI Trade GmbH is a pure wholesale company. We only sell our products to retailers. When you purchase AMEWI products as an end consumer, you are entering into a contract with the retailer. Please always contact your dealer in warranty cases.

AMEWI Trade GmbH
Nikolaus-Otto-Str. 18
33178 Borchen
Germany
Servicezeiten: Dienstag 9:30 – 12:00 Uhr | Donnerstag 14:00 – 16:30 Uhr Telefon: +49 180 5009821 (Festnetz 14Ct/Min., Mobil max. 42Ct/Min.)
Support: https://amewi.com

DECLARATION OF CONFORMITY

This product has been manufactured according to actual technical standards. The product is matching the requirements of the existing European and national guidelines. The Declaration of Conformity has been proofed. AMEWI Trade GmbH declares that this product is matching the basic requirements and remaining regulations of the guideline 2014/53/EU (RED). The declarations and documents are stored at the manufacturer and can be requested and applied there. https://amewi.com/Konformitaetserklaerungen
For additional questions to the product and conformity please contact: Amewi Trade GmbH Nikolaus-Otto-Str. 18, 33178 Borchen Germany or website https://amewi.com.

SECURITY AND HAZARD WARNINGS

For damage, caused by disregarding of the manual, warranty expires.
We are not liable for secondary failures, material, or personal damage, caused by in proper usage or disregarding the security notices.
Based on security and registration (CE) reasons, it is forbidden to modify the product personally. Do not disassemble the product.
Small parts. Danger of suffocation or risk of injury caused by small parts.
Suitable for people aged 8!
The product is not allowed to get moist or wet. The product is only allowed to be used on flat and clean surfaces. Even a drop down from a small height can cause damage to the product.

BATTERY NOTICE & DISPOSAL

Batteries / rechargeable batteries do not belong in the hands of children.
Batteries or rechargeable batteries may only be changed by an adult. Never mix rechargeable batteries with dry batteries. Never mix full batteries with half- empty batteries. Never mix rechargeable batteries of different capacities.
Never attempt to charge dry batteries. Ensure correct polarity. Defective rechargeable batteries/batteries must be disposed of properly (hazardous waste). Never carry out the charging process unsupervised. If you have any questions about the charging time, read the operating instructions or contact the manufacturer.
Read the safety instructions and warnings before using or charging the Li-ion battery.
Stop using or charging immediately if the battery is leaking, has a temperature of over 70° C or anything else unusual occurs. Always charge and store batteries on a fireproof surface or in a fireproof LiPo bag.
Only use a qualified and specific Li-Po/Li-Ion charger for Li-Po/Li-Ion batteries or NiMH charger for NiMH batteries.
Never charge the battery unattended. Do not charge the battery if the charging process exceeds 4.2 V / cell. Do not charge the battery with a charging current above 2C. Please check and ensure that you are using a qualified charger. An unqualified charger may cause a fire. Do not discharge the battery with a current that exceeds the maximum discharge current. Otherwise, this will cause the battery to overheat. This can lead to bursting, fire or explosion.
Never disassemble, puncture, knock, drop, short-circuit and/or throw the battery into a fire.
Improper use such as short-circuiting or overcharging can lead to explosions or fire.
Store the battery in a safe place where infants or children cannot reach it.
The above indicates the danger of using the battery. The user assumes full responsibility for the result of using the battery. Please be sure to observe our safety instructions which you can find online at https://amewi.com/downloads/manuals/Akku-Sicherheitshinweise.pdf

DISPOSAL

AMEWI is registered below the Bat-Reg.-No. DE 77735153 and WEEE-Reg.-No. 93834722 at the foundation EAR and recycles all used electronic parts properly. Electric and electronical products are not allowed to put in household garbage. Please dispose the product at the end of the lifetime according to the actual laws. You as a customer are responsible by law for the return of all used batteries, a disposal over the household garbage is forbidden! Batteries containing hazardous substances are marked with the alongside symbols, which point to the prohibition of disposal in household garbage. Additional notations for the critical heavy metal are Cd=Cadmium, Hg=Quicksilver, Pb=lead {Label is placed on the batteries, for example below the bottom left trash symbols).
Based on RoHS labelling the manufacturer confirms, that all limit values were taken care of at the time of manufacturing.
Batteries labelled with the recycling symbol can be put into used battery collecting tank.
(Most supermarkets have)
They are not allowed to be put into local household garbage.
AMEWI Trade GmbH is involved in the dual system for boxing over the company Landbell AG.
All used boxes are collected from partner companies (waste disposal contractor) at private customers (local household), sorted and properly utilized. The involvement in a Dual Systems helps to save C02 Emissions.
THANK YOU
Thank you for purchasing the Amewi Model. Please read the instruction manual carefully and keep it for future reference.
WARNING

This remote-controlled model is not a toy. It consists of many small parts and is not suitable for children under 8 years.
Four 1.5V AA batteries are required for the remote control.
A 7,4V Li-Po battery is used for the model (included).
Always keep your fingers away from the drive parts and other moving parts to avoid injury.
The model’s motor gets very hot. To avoid burn injuries, allow the motor to cool for 10-15 minutes after use before touching it.

ON INAPPROPRIATE USE OF THE PRODUCT

Please do not disassemble or modify the model in any way. Do not use this product improperly or illegally and do not operate it in a manner that could endanger others or yourself.

MAXIMUM TRANSMITTING POWER DATA

Operation Frequency:	2420-2465MHz

Maximum Radio Frequency power:
Maximum peak power| 2dBm

IMPORTANT NOTES

Note: This product is manufactured according to strict performance guidelines and complies with safety standards and requirements. This product is not suitable for children under 8 years of age. The manufacturer is not liable for any injury or accident caused using abnormal parts, excessive wear and tear, improper assembly, or operation. Please operate this product safely and responsibly.

PRECAUTIONS

Please read the following safety information before using the model.
Please do not use the model in rain, snow, or thunderstorms. If liquid enters the electronics, they may be irreparably damaged.
Please do not use the model in an environment that you cannot see.
Signal interference can cause the model to go out of control. Please do not use the model in the following places:

| | |
---|---|---|---
Near a radio tower, mobile phone masts or other places with active radio waves.| Near crowds or in public places.| Near rivers, ponds or lakes.| Near electricity pylons or other
transmission towers.

Please do not operate the model if you are tired or unwell, have drunk alcohol or taken drugs – this may cause injury to yourself or others.
To avoid burns, never touch drive parts and motors during or immediately after use as they can be very hot.
Incorrect operation of the transmitter can cause injury to you or others. Be sure to familiarize yourself with the operation before using the model.
Check the model and the remote control before use. Check screws to make sure they are tight.
When you have finished using the model, always switch off the model first and then the remote control. Otherwise, the model may get out of control.
If the model gets out of range, it may get out of control. Please always stay close to the model with the transmitter.

IMPORTANT NOTES

Be sure to read thoroughly the manual before you begin.
As the product contains small parts, keep it away from small children.
Never reverse connection / disassemble the battery.
Do not operate the model on public roads or crowded places.

CONTENT

DRONE DETAILS

ATTENTION
It is important that the propellers are fitted correctly. Pay attention to the letters on the propeller.

INSTRUCTION MANUAL FIGHTSTAR BATTLE DRONE

THE REMOTE CONTROL

JOYSTICK MODE

BATTERY INSTALLATION

Loosen the screw on the battery compartment cover and remove it. Insert three 1.5V AAA batteries, ensuring correct polarity. Now close the battery compartment and screw the cover tight.

CHARGING BATTERY

Connect the USB charging cable to a USB socket on a PC/laptop, USB power supply unit or power bank.
Connect the charging plug to the battery.
The LED on the charging cable is off during the charging process. When charging is complete, the LED lights up.
Disconnect the charging cable from the battery when charging is complete.

BE SURE TO OBSERVE THE SAFETY INSTRUCTIONS FOR HANDLING RECHARGEABLE BATTERIES IN THESE INSTRUCTIONS AND ON OUR WEBSITE

https://amewi.com/Akku-Sicherheit

INSERTING AND REMOVING THE BATTERY

INSTALLATION: Put the battery into the battery slot, which is underneath the fuselage. Push the battery forward until you hear a click, which indicates that is firmly installed.

The battery should be installed firmly. Otherwise, the flight safety of your drone may be affected. The drone may crash due to power cut during the flight.
REMOVE: As depicted below, first push the battery back, then pull up.

REPLACE PROPELLER

Attach each propeller to the corresponding motor shaft A/B as shown above.
To remove the propeller, place the lever tool under the propeller and press the rear end carefully downwards.

Place the new propeller (make sure you have the correct propeller A/B) on the motor shaft and press it down carefully until the upper edge of the propeller is level with the protective ring.
When fitting new propellers, make sure that you do not deform them. This can otherwise have a negative effect on the flight behaviour and flight stability.

PAIRING

If you want to use two or more drones, make sure that you do not switch them on at the same time. Only when one drone is successfully bound to the remote control may the next one be switched on.

Switch on the remote control. A beep sounds and the indicator light flashes.

Switch on the drone. The indicator light on the drone flashes quickly

Place the drone on a level surface with the front facing away from you.

Slowly push the left-hand lever all the way up (you will hear a beep) and all the way down again (you will hear another beep).
As soon as the indicator light lights up continuously, the binding process is complete.

GYRO CALIBRATION

Once the binding process is complete, press the calibration button. The remote control emits a beep and the LEDs on the drone flash rapidly for two seconds. The gyro is then calibrated, and the drone is ready to fly.

TAKING-OFF AND LANDING METHOD

METHOD 1:
Press the auto take-off/landing button, the drone takes off automatically and then hovers at a height of approx. 1.2 metres. Press the button again, the drone slowly descends to the ground and lands.
METHOD 2:
Press the left-hand lever upwards until the propellers start to rotate. Press the button again to make the drone take off. To land the drone, press the lever all the way down until the propellers stop.

EMERGENCY STOP

If you lose control of the drone, there is an option to stop the motors. Press and hold the auto start/land button. The motors stop immediately.
Only use the emergency stop function in dangerous situations to avoid damage or injury. The drone can be damaged if it crashes.

TRIMMING

If the drone drifts in one direction in hover mode, use the trim buttons until it hovers on the spot.

If the drone hovers forwards, press the backwards trim button until it no longer hovers forwards.

If the drone hovers to the left, press the right trim button until it no longer hovers to the left.
If the drone hovers backwards, press the forward trim button until it no longer hovers backwards.
If the drone hovers to the right, press the left trim button until it no longer hovers to the right.

COMBAT FUNCTION

The drone is equipped with a combat function that allows you to engage in exciting aerial battles with your friends. If you press the combat button on the top right of the remote control, an infrared signal is fired. The launch is signalled by the remote-control beeping and the LEDs on the drone flashing for 1-2 seconds. The range of the infrared signal is approx. 2-3 metres.
The launch head at the front of the drone can be manually adjusted by 90°.

The signal receiver is built behind the power switch at the bottom of the drone.
The receiver cannot be adjusted. If it is bent, this can lead to errors when receiving the signal.

AIR FLYING BATTLE

When the drone is hit for the first time in a flying battle, it swings to the right and left for one to two seconds. The LEDs at the front and rear of the protective rings flash. If the drone is hit for the second time, it sways again and the LEDs at the front go out. On the third hit, the rear LEDs also go out while the drone slowly sinks to the ground. The drone is defeated.
Press the left lever of the remote control down and press the auto-start button. The drone takes off and is ready for another round of combat.

DRIVING BATTLE

When the drone is hit for the first time while travelling, the front and rear LEDs flash for one to two seconds. The rear LEDs then switch off. The second time it is hit, all LEDs flash and then the front LEDs also go out. If the drone is hit for the third time, it bounces up once and the front and rear LEDs flash. The drone is defeated. To re-enter the fight, press the left lever of the remote control downwards and press the right lever forwards. The drone is now ready to fight again.

HEADLESS MODE

In headless mode, the drone can be controlled from the pilot’s point of view, regardless of which direction it is facing.
To activate headless mode, press the “Headless” button. The LEDs on the drone flash and the drone flies in the desired direction, regardless of the direction in which the drone is facing. Press the headless button again to exit headless mode.

Please note that the pilot always looks in the same direction as the drone during take-off.
Under Headless Mode, the forward direction is the direction that the head of drone faces when the drone takes off. When the pilot pushes the right joystick forward, the drone will fly forward. lf the pilot pushes the right joystick backward; the drone will fly towards him/her. lf the pilot moves the right joystick left/right, the drone will move left/right relative to you. ln order to make sure the pilot can tell drone’s direction; we recommend that pilots to stay in the same orientation as the drone head faces when the drone takes off.

DUAL RATE

By pressing the speed button, the drone changes speed. There are three speed levels: slow, fast, and super-fast.
LED ON/OFF

Press the LED button to turn on/off the lights.

CIRCLE FLY

Press the Circle Fly button briefly, the drone will enter the Circle Fly mode. At the same time, push the Left Joystick to the left, and the diameter of the flight circle will become larger. When the Left Joystick is turned to the right, the diameter of the flight circle will become smaller. You can push the Right Joystick to exit the Circle Fly mode.

360° FLIPS

Once you have familiarised yourself with all the drone’s functions, you can try out the incredible flip mode. Fly the drone at a height of at least two metres and press the 360° flip button, press the right-hand lever in the desired direction in which the flip is to be performed (forwards, backwards, left, right). The drone performs a flip in the corresponding direction. Please note that the battery should be fully charged when using this function. If the battery is low, the drone may descend very far after the flip.

RACE ON THE GROUND

When the drone is in the air, land it. Press the right-hand lever of the remotecontrol forwards and the drone will move forwards.
When the drone is driving on the ground, push the left lever to the left or right the drone will turn left or right.
On the ground, the speed can be adjusted using the speed button.
If you push the left lever upwards, flight mode is activated, and the drone takes off.

In race on the ground mode, the drone can only drive forwards and turn left or right. It cannot be driven backwards or to the left or right.
Please only drive the drone on smooth surfaces. Rough surfaces are not suitable for driving the drone.