Hardoll B0B9SL2JWB Solar LED Home Decorative Light User Manual

User Manual
Hardoil Solar Garden Lights

Please read the user guide before use and keep it property

Warm Notice:

• Please charge the light with sunlight for 8 hours before first use
• The switch need to be at “ON” position so that the light could be charged normally. If at ” OFF * position, the light won’t charge.
• The light will not turn on in daytime or in any other lighting coverage, as solar panel has light sensor in it. Please make sure solar panel away other lighting coverage at night. You can cover the solar panel by hand to test the light.
• Install the light in a location that can receive 5-8 hours of sunlight, and away from the shade caused by trees, buildings and etc.

Technical Index:

1. Battery: Ni-MH Battery, 1.2V/600mAh
2. Size: 3.2x 3.2x 20 inch
3. Light Sources: 1 PC Warm Light LED + 1 PC RGB Light
4. Color Temperature: 3200K/RGB
5. Lighting Time: 8Hours -12Hours
6. IP Rating : IP65
7. Working Temperature: -20-60°C
8. Housing Material: ABS
9. Sensor: Dusk to Dawn Light Sensor

Please install from the bottom up, not from the top down, and then rotate and tighten.

Please hold the light post with hands and insert it into the ground.
If the ground is too hard, you have to use tools to soften up the  ground first, and then insert the spike of the solar path lamp intothe ground.

installation Instructions:

|
---|---
(1) Peel off the protective film| (2) Choose color changing/warm white light
|
(4) Insert, and twist to fix the crystal clear lampshade| (3) Gently put in the solar panel
|
(5) Connect the spike| (6) Connect the pole

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>