DinoFire Presentation Clicker 100FT Hyperlink Volume Control Wireless Presenter Instructions
- June 5, 2024
- DinoFire
Table of Contents
Presentation Clicker 100FT Hyperlink Volume Control Wireless Presenter
Instructions
Presentation Clicker 100FT Hyperlink Volume Control Wireless Presenter
Wireless Presenter
Before using the product, please read this manual carefully and keep it
properly for future reference.
Product specifications
- Main material: ABS
- Working frequency:2404MHz, 2424MHz, 2453MHz
- Laser control distance:<200m
- Remote control distance:50m
- Laser color: red laser
- Laser wavelength:635-650nm
- Battery type: 1pcs AAA battery
- Operating system: Windows, Mac OS, Linux, etc
- Compatible interfaces: USB-A interface, Type-c interface
- Product size: 143’22’14mm (±2mm )
Function Description
Insert the bottom receiver into the computer with a USB interface or Type-c interface after putting the battery into the product, then open the button on the product, open the PPT file at the same time, and point at the curtain or other display device to start the demonstration.
Cautions
- Do not disassemble, bump, crush or throw it into the fire!
- If severe swelling occurs, do not continue to use it!
- Do not place in a high-temperature environment!
- Don’t uses the laser to directly shine on yourself or others’ eyes, otherwise, it will cause serious damage to the eyes!
Instruction for use
Do not repair or replace any part of the machine yourself (unless specifically instructed in this manual). Please complete the repairs to your dealer or authorized agent.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.