nVent CADDY MDC023 21-23 MM Microfix Double Pipe Clamp Owner’s Manual

nVent CADDY MDC023 21-23 MM Microfix Double Pipe Clamp

Specifications

• Catalog Number: MDC023
• Features:
  • Fast installation of parallel pipes from a single anchor
  • Category II noise reduction according to DIN EN ISO 3822-1
  • Compliant for sound insulation design according to DIN 4109
  • Reaction-to-fire classification is E in compliance with DIN EN 13501-1
• Product Attributes: The lining is EPDM rubber

Product Usage Instructions

• Installation
  • Refer to the product instruction sheets available at www.nvent.com or from your nVent customer service representative.
  • Ensure fast installation of parallel pipes from a single anchor.
  • Follow the noise reduction standards of DIN EN ISO 3822-1 during installation.
  • Comply with sound insulation design requirements as per DIN 4109.
  • Verify that the reaction-to-fire classification is E according to DIN EN 13501-1.
• Safety Precautions
  • It is important to observe the following safety precautions:
  • Do not misuse the product.
  • Do not misapply the product.
  • Follow all instructions and warnings provided by nVent to prevent malfunctions, property damage, injury, or voiding of warranty.
  • To ensure proper usage of the product, follow these detailed instructions:

FAQs

• Q: What should I do if I encounter a product malfunction?
  • A: If you experience a product malfunction, immediately stop using the product and contact nVent customer service for assistance.
• Q: Can this product be used for vertical pipe installations?
  • A: The product is designed for fast installation of parallel pipes from a single anchor. For vertical installations, please refer to the specific product guidelines.
• Q: Is the EPDM rubber lining resistant to high temperatures?
  • A: The EPDM rubber lining provides good resistance to temperature variations, but it is recommended to check the specific temperature limits in the product specifications.

CATALOG NUMBER

• MDC023

FEATURES

• Fast installation of parallel pipes from a single anchor
• Category II noise reduction according to DIN EN ISO 3822-1
• Compliant for sound insulation design according to DIN 4109
• Reaction-to-fire classification is “E” in compliance with DIN EN 13501-1

PRODUCT ATTRIBUTES

• Article Number: 596010
• Material: Steel;EPDM-SBR Rubber
• Finish: Electrogalvanized
• Width (W): 20 mm
• Screw Diameter (Sc): 6
• Screw Length (L): 20mm
• Temperature: -50 to 110 °C
• Color: Black
• Pipe Size: 1/2″
• NB/DN: 15
• Outer Diameter (OD): 21 – 23 mm
• Thickness (T): 1.5 mm
• A: 76 mm
• B: 12 mm
• C: 8.5 mm
• Static Load (F): 500N

ADDITIONAL PRODUCT DETAILS

• The lining is EPDM rubber.

DIAGRAMS

WARNING

• nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
• Instruction sheets are available at www.nvent.com and from your nVent customer service representative.
• Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.

CONTACT

• North America

  • +1.800.753.9221
  • Option 1 – Customer Care
  • Option 2 – Technical Support
  • Europe
    Netherlands: +31 800-0200135

• France:

  • +33 800 901 793

• Europe

  • Germany: 800 1890272
  • Other Countries: +31 13 5835404

• APAC

  • Shanghai: + 86 21 2412 1618/19
  • Sydney: +61 2 9751 8500

• Our powerful portfolio of brands:

  • nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER

© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.

References

• Building a more Sustainable and Electrified World | nVent
• Building a more Sustainable and Electrified World | nVent

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>