MICROTECH IP67 Wireless Offset Centerline Caliper User Manual

: July 30, 2024
: microtech

Table of Contents

MICROTECH IP67 Wireless Offset Centerline Caliper
Product Usage Instructions
OPERATION INSTRUCTIONS
BUTTON FUNCTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MICROTECH IP67 Wireless Offset Centerline Caliper

MICROTECH-IP67-Wireless-Offset-Centerline-Caliper-product-
image

Specifications

Brand: MICROTECH
Model: Offset Centerline Caliper IP67
Wireless Connectivity: WIRELESS TO MDS, WIRELESS HID+MAC
Calibration Standards: ISO 17025:2017, ISO 9001:2015
Battery Type: CR2032
IP Rating: IP67

Product Usage Instructions

Initial Setup

Wipe the measuring surfaces with a clean cloth soaked in gasoline to remove anti-corrosion oil.
Insert the CR2032 battery into the caliper, ensuring correct polarity.
The caliper has an Autoswitch on/off function; move the electronic module to switch it on.

Measurement Process

Ensure measuring jaws sum to the measured object without knocking.
Avoid warps on measuring surfaces and ensure full contact with the object.

Battery Replacement
Replace the CR2032 battery when needed, following proper safety precautions.

Button Functions
Use the MODE button to select different wireless data transfer modes.

Wireless Data Transfer

Switch on the wireless module by pressing the button for 2 seconds.
Select the desired transfer mode (STANDARD or ECO) for data transfer.
Use the buttons on the caliper or the app to save data.

Downloading MDS App
Download the MICROTECH MDS app from www.microtech.tools for various platforms.

Frequently Asked Questions (FAQ)

Q: What battery type does the caliper use?
- A: The caliper uses a CR2032 battery for operation.
Q: How do I switch on the wireless data transfer mode?
- A: Press the wireless module button for 2 seconds to activate the wireless data transfer mode.
Q: Where can I download the MICROTECH MDS app?
- A: You can download the app for Windows, Android, iOS, and MacOS from www.microtech.tools .
Q: How should I clean the caliper for maintenance?
- A: Wipe the measuring surfaces with a clean cloth soaked in gasoline to remove anti-corrosion oil.

MICROTECH
WWW.MICROTECH.TOOLS

WIRELESS OFFSET CENTERLINE CALIPER IP67

USER MANUAL

$MICROTECH-IP67-Wireless-Offset-Centerline-Caliper-image $1$$

Item No| Range| Reso lution| Accu racy| Anvil D| Protection| Preset
---|---|---|---|---|---|---
standard| option
mm| inch| mm| μm| mm| mm
141730154| 10-160| 0.4-6.4”| 0,01| ±30| 10| 20, 35| IP67| •
141730204| 10-210| 0.4-8.4”| •
141730304| 10-310| 0.4-12.4”| •

MODIFICATIONS

OPERATION INSTRUCTIONS

OFFSET CENTERLINE calipers equipped with special jaws for measuring center to center distance.
Wipe with a clean cloth, soaked in gasoline, measuring surface of the frame and gauge calipers to remove anti-corrosion oil. If necessary, open the battery cover; insert the battery (type CR2032) according to the polarity of the electrodes.

This caliper has Autoswitch on/ off function

move electronic module for switch on caliper
after 10 minutes without any moving caliper will switch off

During the measurement, measuring jaws should to sum to the measured object without knocking.
During the measurement avoid warps of measuring surfaces of the instrument. Measuring surface must be fully in contact with the measurement object

WARNING!
IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED: Scratches on the measuring surfaces
Measuring the size of object in the process of machining
Shocks or dropping, avoid bending of rod or other surfaces.

BUTTON FUNCTIONS

$MICROTECH-IP67-Wireless-Offset-Centerline-Caliper-image $4$$

POWER CONSUMPTION

MODE	TRANSFER DATA
WIRELESS OFF
WIRELESS TO MDS	STANDARD
ECO (GATT)	45-100 μA
WIRELESS HID	0.4 mA
WIRELESS HID+MAC	0.4 mA

WIRELESS DATA TRANSFER MODES
MICROTECH caliper with Built-in Wireless data output module for transfer results

$MICROTECH-IP67-Wireless-Offset-Centerline-Caliper-image $5$$

WIRELESS DATA TRANSFER CONNECTION

SWITCH ON WIRELESS module push button 2 sec;
In WIRELESS TO MDS non-stop blinking on display up to connection to MDS app and selecting STANDARD or ECO sub-mode.
ECO recommended for battery economy
In STANDARD sub mode data transfer 4 times/sec and all time on display.
Push button to save data to MDS app or use buttons and Timer inside app. In ECO (GATT) sub mode caliper ready to transfer data any time with no indication. Push button to save data on MDS app.
For selecting next mode push ****5 sec.
WIRELESS HID and WIRELESS HID+MAC blinking 2 sec on display and will be ready for searching on Tablet, Smartphone or Computer Bluetooth connections. After successful connection save data to customers app with push ****button.