MICROTECH 1103500358 Tube Sub Micron Computerized Micrometer User Manual
- June 13, 2024
- microtech
Table of Contents
MICROTECH 1103500358 Tube Sub Micron Computerized Micrometer
Product Information
- Product Name: MICROTECH TIMER MEMORY LINEAR CORRECTION USB HID
- Model: Tube Sub-Micron Computerized Micrometer
- Specifications:
- Range: 0-25mm (0-1 inch)
- Resolution: 0.0001mm
- Accuracy: ±1.5µm
- Tube Diameter: 1.8mm – 4.7mm
- Display: 1.5 inch LED
- Data Output: USB
- Protection: IP-65
- Power Supply: Rechargeable Li-Pol Battery (450mAh)
- Charging Port: Micro-USB
- Case Material: Aluminium
- Buttons: Switch (Multifunctional), Reset
- Wireless Data Transfer: Long Range
Product Usage Instructions
- Clean the oil from the measuring surfaces of the micrometer using a cloth.
- Turn on the micrometer by pressing the SWITCH ON button.
- Check the setting display to zero.
- Contact the measuring surfaces of the anvil and the spindle with each other or with the setting gauge using the ratchet and take a measurement.
- Rotate the micrometer screw in the direction of convergence of the measuring surfaces using the ratchet.
- For zero setting, press the ZERO button on the touchscreen.
Main Information:
- Precision Measurements: MICROTECH computerized micrometer with 0.1mm resolution is suitable for high precision measurements in manufacturing, automotive, medical industries, and calibration.
- Color Go/NoGo Indication: Easy and quick limits control. Set maximum and minimum values through the menu. Color indication reduces the possibility of errors during control.
- Internal Memory: The computerized micrometer has a memory manager that allows saving data to folders. Separate data or folders can be wirelessly transferred to MICROTECH Software (Windows, Android, iOS).
- Formula Mode: Use Ax2+Bx+C formula for preset function and magnification of measured value. Formula can be updated upon customer request.
- Error Compensation: Mathematical error compensation can beperformed by recalibrating the micrometer with a gauge block setand saving the results. The micrometer will indicate measuring results including the re-calibration.
- Temperature Compensation: Recalculate details sizes with high or low temperatures to normal (20°C conditions). Available recalculation for 7 materials.
Charging:
- Connect the USB cable for charging. The charging process willbe indicated on the battery status (switch on the device).Built-in Battery: Rechargeable Li-Pol battery.
Wireless Data Transfer:
- Activate wireless data transfer in the wireless menu.
- Switch on wireless data transmission.
- Use the multifunctional button to save value to memory or send data by touchscreen or button push.
- Connect the instrument with MICS indication system to a tabletor PC.
- Send data to tablet or PC using touchscreen, multifunctional button push (activated in wireless menu), timer (activated in timermenu), or from internal memory.
Memory:
- To save measuring data to the internal caliper’s memory, touchthe data area on the screen or perform a short button push.
- You can view saved data through the menu or send it wirelesslyto Windows PC, Android, or iOS devices.
SPECIFICATION
Item No| Range| Resolution| Accuracy| Tube D|
Display| Protection| Data output
---|---|---|---|---|---|---|---
| mm| inch| mm| μm| mm| | |
1103500358| 0-25| 0-1”|
0,0001
| ±2| 1.8| Color 1.5” Touch- screen| IP-65|
WIRELESS+USB
1103500258| ±2|
4.7
| IP-65
1103500508| 25-50| 1-2”| ±2| IP-65
1103500758| 50-75| 2-3”| ±3| IP-65
1103500108| 75-100| 3-4”| ±3| IP-65
TECHNICAL DATA
Parameters|
---|---
|
LED display| color 1,54 inch
Resolution| 240×240
Indication system| MICS 3.0
Power supply| Rechargeable Li-Pol battery
Battery capacity| 450 mAh
Charging port| micro-USB
Case material| Aluminium
Buttons| Switch (Multifuntional), Reset
Wireless data transfer| Long range
Clean the oil from the measuring surfaces of micrometer by cloth. Turn on micrometer by pressing SWITCH ON button. Check the setting display to zero. Contact with each other (or with setting gauge) measuring surfaces of the anvil and the spindle, using the ratchet and take a measurement. Rotation the micrometer screw in the direction of convergence measuring surfaces using the ratchet. For zero setting, press the ZERO button on Touchscreen.
MAIN INFO
PRECISION MEASUREMENTS
MICROTECH computerized micrometer with 0.1 resolution can be used for high
precisoт measurements in manufacturing, automotive medical industry and for
calibration
COLOR GO/NOGO INDICATION
Easy and quick limits control. It’s possible setup max and min value throw
menu. Color indication reduce possibility of error during control
INTERNAL MEMORY
Computerized micrometer has memory manger with possibility saving data to
folders. Separate Data’s or Folders can be transfer Wireless to MICROTECH
Software (Windows, Android,iOS)
FORMULA MODE
In Formula mode we use Ax2+Bx+C Main using of this function is:
- Preset function
- Magnification of measured value
For customers request Formula can be updated
ERROR COMPENSATION
It’s possible to make mathematical error compensation. Just re-calibrate
micrometer with gauge block set and save results. Micrometer will indicate
measuring results include re-calibration
TEMPERATURE COMPENSATION
Temperature compensation function gives possibility recalculate details sizes
with high or low temperatures to normal (20C conditions). Available
recalculation for 7 materials
CHARGING
For charging connect USB cable Charging process indicating on Battery status (switch on device)
- BUILT-IN BATTERY – rechargeable Li-Pol battery
WIRELESS DATA TRANSFER
Activate WIRELESS data transfer in WIRELESS menu
Connect instrument with MICS indication system to Tablet or PC
Send data tp Tablet or PC:
- by Touchscreen
- by Multifunctinal button push (activted in Wireless menu)
- by Timer (activated in Timer menu)
- from Internal Memory
MEMORY
For save measuring data to internal caliper’s memory touch data area on screen
or short button push. You can view saved data throw menu or send Wireless
connection to Windows PC, Android or iOS devices.
CONNECTION
DATA TRANSFER DISTANCE FOR INTELLIGENT INSTRUMENTS
- All MICROTECH Intelligent instruments has internal memory. You can collect data to memory and when it will be neccesary transfer all data to the peripheral device with no data loosing.
- It’s possible transfer data, like in Wireless instruments up to 15 m or up 50 m with external antenna
- USB port can be used to transfer data directly to Windows PC
MENU NAVIGATION
MENU CONFIGURATION
MICS SYSTEM FUNCTIONS
LIMITS GO/NOGO
MAX/MIN
FORMULA
TIMER
MATHEMATICAL ERROR COMPENSATION
TEMPERATURE COMPENSATION
RESOLUTION
EXTRA (Axis mode)
MICS SYSTEM FUNCTIONS
WIRELESS CONNECTION
USB CONNECTION
PIN & RESET
DISPLAY SETTING
MICS SYSTEM FUNCTIONS
MEMORY SETTINGS
LINK TO SOFTWARE
CALIBRATION DATE
DEVICE INFO
Information about device
- device name
- firmware version
- MAC adress for easy connection
MICROTECH
- innovative measuring instruments
- 61001, Kharkiv, Ukraine, str. Rustaveli, 39
- tel.: +38 (057) 739-03-50
- www.microtech.ua
- [email protected].
Change without prior notice