MICROTECH 142505151 Micron Scale Ruler with Loupe User Manual
- June 1, 2024
- microtech
Table of Contents
MICROTECH 142505151 Micron Scale Ruler with Loupe User Manual
Item No| Range| Reso- lution| Accu- racy|
Vision| Protection| Preset| Display
---|---|---|---|---|---|---|---
mm| inch| mm| μm
142505151| 0-500| 0-20”| 0,001| ±20| 10x magnifier| IP67| •| Swiss electronics
142510151| 0-1000| 0-40”| ±30| •
142515151| 0-1500| 0-60”| ±40| •
142520151| 0-2000| 0-80”| ±50| •
142530151| 0-3000| 0-120”| ±70| •
BUTTON FUNCTIONS
OPERATION INSTRUCTIONS
Wipe with a clean cloth, soaked in gasoline, bases and measuring surface of the frame and gauge calipers to remove anti-corrosion oil. Then wipe them with a clean dry cloth.
If necessary, open the battery cover; insert the battery (type CR2032) according to the polarity of the electrodes.
This caliper has Auto switch on/ off function:
- move electronic module for switch on caliper
- after 10 minutes without any moving caliper will switch off.
During the measurement, measuring jaws should to sum to the measured object
without knocking.
During the measurement avoid warps of measuring surfaces of the instrument.
Measuring surface must be fully in contact with the measurement object.
WARNING!
IN THE PROCESS OF WORKING WITH SCALES SHOULD BE AVOIDED:
Scratches on the measuring surfaces and bases;
Measuring the size of object in the process of machining;
Shocks or dropping, avoid bending of rod or other surfaces.
LOUPE 10X WITH LED
Micron scale equipped with 10x loupe with LED light.
Switch on LED light by screw rotating.
MICROTECH
innovative measuring instruments
61001, Kharkiv, Ukraine, str. Rustaveli, 39
www.microtech.ua
[email protected]
Change without prior notice.
Edition: M1030_0520