PARKSIDE Mist Cooling and Watering System Instruction Manual

July 27, 2024
PARKSIDE

PARKSIDE-logo

PARKSIDE Mist Cooling and Watering System

PARKSIDE-Mist-Cooling-and-Watering-System-product

Product Information

Specifications

  • Max. Operating Pressure: 4bar
  • Delivery Scope:
    • 1 hose
    • 1 tap connector with quick connector
    • 5 double connectors
    • 1 end connector
    • 6 saddle clamps
    • 6 mounting clamps with nail

MIST COOLING & WATERING SYSTEM

Introduction
We congratulate you on the purchase of your new product. You have chosen a high quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the instructions for use and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use
This product is suitable for cooling the environment or keeping plants moisture in garden. The product is not intended for commercial use.

Technical data
Max. operating pressure: 4bar

Safety instructions

Important: Read these original operating instructions and the safety information carefully and keep them in a safe place!

  • Danger to life!
    • Never leave children unsupervised with the packaging material.
    • Danger of suffocation!
  • Risk of injury!
    • WARNING! Read all safety information and instructions.
    • Before each use, make sure that all parts of the product are undamaged and assembled
    • according to these original operating instructions. There is risk of injury if the product is not assembled correctly.
    • WARNING! Never point the water jet at people or animals!
    • WARNING! Never point the water jet at electrical equipment!
    • Only suitable for outdoor use.
  • Avoid material damage!
    • Protect the product from frost.
    • The product is only suitable for use with cold water.
    • WARNING! Turn off the tap after each use.
    • Do not grease or oil the spray nozzles as they may clog.
    • Check the product for damage or wear before each use. Only use the product if it is in good working condition!
    • Discontinue using the product if there is visible or suspected damage.

PARKSIDE-Mist-Cooling-and-Watering-System-fig- \(4\)

Use

  • Cut the hose in the desired length [3], unscrew both nuts of the double connector and insert the hose to both sides of the double connector, screw the nut tightly.
  • Repeat above step to complete the assembling.
  • Unscrew the nut of end connector, only insert the hose to one side of the end connector [4] and screw the nut tightly.

For 3/4” tap, unscrew the nut of the provided tap connector. Insert the hose and screw the nut tightly. Screw the tap connector with the tap tightly. (Fig A)
For 1/2” tap, unscrew the nut of the provided tap connector with quick connector. Insert the hose and screw the nut tightly. Connect with the extra 1/2” hose connection (not included). (Fig B)PARKSIDE-Mist-Cooling-and-
Watering-System-fig- \(2\) Remark: Move the spray nozzle manually to adjust the angle.

  • Use the provided saddle clamps to fix on the parasol [1].
  • Use the provided mounting clamps to clip the hose and fix on the desired area [2].

After use
Turn off the water supply to stop irrigation after each use.

Do not use the product for drinks!

Before using for the first time, please read the instruction carefully

Delivery scope

  • 1 hose
  • 1 tap connector with quick connector
  • 5 double connectors
  • 1 end connector
  • 6 saddle clamps
  • 6 mounting clamps with nail

Product Usage Instructions

  1. Cut the hose in the desired length.
  2. Unscrew both nuts of the double connector and insert the hose to both sides of the double connector, then screw the nut tightly.
  3. Repeat the above step to complete the assembling.
  4. Unscrew the nut of the end connector, only insert the hose to one side of the end connector and screw the nut tightly.
  5. For 3/4 tap, unscrew the nut of the provided tap connector. Insert the hose and screw the nut tightly. Screw the tap connector with the tap tightly.
  6. For 1/2 tap, unscrew the nut of the provided tap connector with quick connector. Insert the hose and screw the nut tightly. Connect with the extra 1/2 hose connection (not included).
  7. Move the spray nozzle manually to adjust the angle.
  8. Use the provided saddle clamps to fix on the parasol.
  9. Use the provided mounting clamps to clip the hose and fix on the desired area.

Cleaning and Care

  • Use a slightly dampened, non-fluffing cloth to clean the product.
  • Dry well after each use and store in a dry and frost-free place.

Disposal
The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. Contact your local refuse disposal authority for more details of how to dispose of your wornout product.

Warranty
The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below. The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase. Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product. Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts. This warranty becomes void if the product has been damaged, or used or maintained improperly. The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.

Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (IAN 447418_2307) available as proof of purchase. You will find the item number on the rating plate, an engraving, on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product. If functional or other defects occur, please contact the service department listed either by telephone or by e-mail. You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

IAN 447418_2307
OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model No.: HG11110
Version: 01/2024

Frequently Asked Questions (FAQ)

Q: Can this product be used for commercial purposes?
A: No, this product is not intended for commercial use. It is suitable for cooling the environment or keeping plants moisture in a garden.

Q: What should I do if I notice any damage to the product?
A: If there is visible or suspected damage to the product, discontinue its use immediately. Check for damage or wear before each use and only use the product if it is in good working condition.

Q: How should I store the product when not in use?
A: After each use, dry the product well and store it in a dry and frost-free place to ensure its longevity.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals