COMMSCOPE MCG23RHDX Co Location Mounts Instruction Manual
- July 27, 2024
- CommScope
Table of Contents
CommScope MCG23RHDX Co-Location Mounts
Specifications
- Manufacturer: CommScope, Inc.
- Material: Steel
- Dimensions: 120″ (H) x 156″ (L) x 84″ (W)
- Weight: 1984.29 lbs
- Compatible Pole Diameter : 15″ to 50″ OD
Product Usage Instructions
Installation Precautions
- Prior to installing the product, identify any hazards or obstructions on the climbing facility.
- Temporary and/or permanent precautionary measures should be taken to maintain the integrity of the climbing facility and safety climb.
Assembly Instructions
- Secure flat plates using the turn-of-nut method.
- Secure U-bolts using the turn-of-nut method, ensuring equal distance and force on each leg of the U-bolt.
- Install flat washers on the near side and lock washers on the far side as shown.
- Follow the provided component part numbers for assembly purposes. Individual components may be shipped as parts within an included kit.
Packaging Instructions
- The packaging should meet CommScope requirements per document IS-PL-3005. Printed documents should be placed inside a polybag and then in the shipping container.
- Extra hardware may be supplied,bagged, and shipped separately.
FAQ
- Q: What are the allowable tieback angles for this product?
- A: The allowable tieback angles are 15 degrees vertical and 25 degrees horizontal.
- Q: Where can I find patent information for this product?
- A: For patent information, visit https://www.cs-pat.com.
- Q: What is the range of monopole diameters this product fits?
- A: This product fits monopoles with diameters ranging from 15 to 50 inches OD.
GENERAL NOTES
- ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X]
FOR PATENT INFO: https://www.cs-pat.com
DESIGN NOTES
- ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION, TEMPORARY
- AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
FITS MONOPOLES 15″ TO 50″ OD.
MANUFACTURING/SPECIAL REQUIREMENTS
- TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL
- U-BOLTS USING THE TURN-OF-NUT METHOD WITH ATTENTION TO LEAVING EQUAL DISTANCE AND EQUAL FORCE ON EACH LEG OF THE U-BOLT.
TEST
PACKAGING
- PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005.
- PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER.
- EXTRA HARDWARE MAY BE SUPPLIED, BAGGED AND SHIPPED.
Parts Descriptions
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES;
INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT
ALLOWABLE TIEBACK ANGLE
DIMENSIONS
ALLOWABLE TIEBACK ANGLE
INSTALLATION
OPTIONAL ACCESSORIES
ALLOWABLE TIEBACK ANGLE
C 2024 CommScope, Inc. Confidential
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>