FEELWORLD 8 Inch Touch Screen Monitor User Guide
- July 26, 2024
- FEELWORLD
Table of Contents
Quick Start Guide
8 Inch Touch Screen Monitor
Foreword
Thank you for purchasing our 8-inch touch screen monitor. Please read this
quick start guide to know the basic data, you can scan the QR code of last
page to download more details. Have a great experience!
Caution
- Please use the adapter attached in the accessory.
- Do not expose this product to direct sunlight, heat or humid conditions.
- Keep away from strong light while using this product so as to obtain the clearest and the most colorful picture.
- Please avoid heavy impact or drop onto the ground.
- The monitor which with touch function should avoid heavy operates to damage the surface of the touch screen.
- Do not use chemical solutions to clean this unit, please simply wipe with clean soft cloth to keep the brightness of the surface.
- If the product does not operate normally when the instructions are followed. Adjust only those controls that are covered by the instructions. Improper adjustment of other controls may result in damage and will often require extensive
Key Features
- 8-inch HD screen, touch function for optional
- 4:3 and 16:9 product for optional
- Multiple inputs HDMI, Video, Audio, VGA,DVI (optional)
- 75x75mm VESA mount hole for wall mount
- Built-in speaker
- Portable standard bracket, convenient to adjust the monitor as 360-degree horizontal and 90 degree vertical.
Product Instruction
- 4:3 Product
1| AV/PC: VGA, AV1, AV2, HDMI, YPbPr inputs signal switch| 2| : Volume down
or to adjust the value of setting
---|---|---|---
3| : Volume up or to adjust the value of setting function| 4| : Press this
button to pop up or close OSD menu
5| : OSD selection button or No Menu State to cycle adjust the 5 level
brightness| 6| : Item selection button or under the VGA mode to auto adjust
phase
7| Power On/Off, to select the state of operating or standby| 8| Infrared
receiving window
| 1 | A/V: Video1 / Video2 input | 2 | YPbPr：Component video signal input |
|---|---|---|---|
| 3 | ：Touch signal interface (connect with PC) Machine no touch function, the | ||
| port useless. | 4 | VGA: VGA signal input (D-Sub interface) | |
| 5 | HDMI：HD digital video/audio signal input | 6 | ：DC12V input voltage port
- 16:9 Products
1| : Power On/Off, to select the state of operating or standby| 2| AV/PC:
VGA, AV1, AV2, HDMI inputs signal switch
---|---|---|---
3| Infrared receiving window| 4| : OSD selection button or No Menu State to
cycle adjust the 5 level brightness
5| : Item selection button or under the VGA mode to auto adjust phase| 6| :
Press this button to pop up or close OSD menu
7| : Volume up or to adjust the value of setting function| 8| : Volume down
or to adjust the value of setting function
10| HDMI HD digital video/audio signal input| 11| SKS input jack, By matching
the SKS interface cable, can access AV1, AV2, VGA signal
12| DC12V input voltage port| |
Technical Parameters
| Panel siA1:C19ze | 8.0″ ( 4:3 ) | 8.0″ (16:9) |
|---|---|---|
| Panel type | TFT LCD | |
| Resolution | 800xRGBx600 | 1024xRGBx600 |
| Backlight | LED | |
| Dot pitch | 0.2025 (H)x0.0675 (V) mm | 0.1725(W) x 0.1656(H) mm |
| Brightness | 250cd/㎡ | 350cd/㎡ |
| Contrast ratio | 500:1 | 500:1 |
| Viewing angle | 70°/70°(L/R) | |
| 50°170°(U/D) | 75°/75°(LJR) |
70°/75°(U/D)
Aspect ratio| 4:3| 16:9
Interfaces| VGA, AV, YPbPr, HDMI| VGA,VIDE01,VIDE02, AUDIO,HDMI
Unit size (mm)| 218(W)x161 (H)x45(D)| 209(W)x147(H)x35(D)
Unit weight| ≈490 g| ≈511g
Install way| L take 1/4 mounting bracket
( VESA 75x75mm )
Input voltage| DC 6 ~ 24V
Power consumption| ≦ 7 W
Touch panel (optional)| 4-wire resistive touch panel (USB/RS232)
5-wire resistive touch panel (optional)
Working temperature| – 20℃～60℃
Storage temperature| – 30℃～70℃
Please scan below QR code to download more detailed instructions
http://www.feelworld.cn/ShowClass.aspx?id=97&py=User-
Manual