PARKSIDE HG07820 Digital Tyre Inflator Instruction Manual

PARKSIDE HG07820 Digital Tyre Inflator

Product Information

Specifications

• Working Pressure: 8 bar
• Maximum Pressure: Not specified
• Rated Input Voltage : 3 V
• Battery Type : 1.5 V AAA/LR03
• Condensate-free
• Pressure Gauge Display: Digital LCD with blue backlight
• Measurement Unit: psi and kPa
• Measurement Accuracy : Compliant with EN14462 (EN1953:2013)
• A-weighted Sound Pressure Level (LpA): 76.5 dB (A) with KpA = 2.5 dB uncertainty
• Sound Power Level (LWA): 96.5 dB (A) with KWA = 2.5 dB uncertainty

Product Usage Instructions

Introduction
The Digital Tyre Inflator is designed to help you easily and accurately inflate your tires to the desired pressure.

Safety Instructions

• Read the user manual carefully before use.
• Always follow warning and safety instructions provided.
• Avoid exposure to direct sunlight and moisture.
• Keep the device away from children.
• Replace weak batteries with new ones.

Initialization

1. Insert the required 1.5 V AAA/LR03 battery into the battery compartment.
2. Close the battery compartment securely.
3. Turn on the device using the power button.

Maintenance
Regular maintenance is essential to ensure the proper functioning of the Digital Tyre Inflator. Follow these steps:

1. Keep the device clean and free from dust.
2. Store the inflator in a dry and cool place when not in use.
3. Dispose of old batteries responsibly according to local regulations.

PDF ONLINE
www.lidl-service.com

List of pictograms used

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the  specified applications. If you pass the producton to anyone else, please ensure that you also pass on all the documentation with it.

Intended use
The digital tyre inflator is designed for inflating and regulating the air pressure of bicycle tyres, balls, airbeds, rubber dinghies etc. Use the product only as described and only for the specific applications as stated. The product is only intended for private use only and is not for commercial use. Any use that is different from the intended use as stated above is prohibited and there is potential danger. Damage or injury caused by misuse or disregarding the above warning is not covered by the warranty or any liability on the part of the manufacturer.

Note: The product is not suitable for inflating car or motorized vehicle tyres.

**Parts description

**

(see fig. A+B)

1. Digital manometer
2. LCD display panel
3. Light/Zero button
4. On/Unit/Off button
5. Inflator
6. Pressure release button
7. Male air fitting coupler
8. Trigger
9. Flexible hose
10. Connector
11. Lock lever
12. Adaptor nozzle for bicycle tyre valve
13. Adaptor nozzle for valve with internal diameter approx. 9 mm
14. Adaptor nozzle for valve with internal diameter approx. 6 mm
15. Battery (1.5 V AAA/LR03 type)
16. Battery compartment cover
17. Battery compartment

Technical data

• Working pressure: 1–8 bar
• Maximum pressure: 8 bar
• Rated input voltage: 3 V
• Battery type: 1.5 V AAA/LR03
• Compressed air quality: Clean, free from oil and moisture
• Digital manometer display: Digital LCD with blue colour backlight
• Mea uring unit : bar, kg/cm², psi and kPa

Measured value determined according to EN 14462 (EN1953:2013).

• A-weighted sound
  • pressure level (LpA): 76.5 dB (A)
  • Uncertainty: KpA = 2.5 dB
• A-weighted sound
  • power level (LWA): 96.5 dB (A)
  • Uncertainty : KWA = 2.5 dB

The digital manometer is powered by 2 1.5 V AAA/LR03 batteries with approx. 3 years of operational durability. If the display fades or does not work correctly or if the low battery symbol appears , please replace the batteries.

Scope of delivery

• 1 Digital tyre inflator
• 3 Adaptor nozzle
• 2 1.5 V AAA/LR03 battery
• 1 Instruction manual

Safety information

Warning :

• Basic safety measures must be followed when using compressed air devices to eliminate the risk of fire, electric shock and personal injury. Be sure to read and follow the notices within these operating instructions prior to using the equipment and store them in a safe location. The manufacturer assumes no liability for damages or personal injury resulting from failure to follow these operating instructions.
• DANGER TO LIFE AND RISK OF ACCIDENTS FOR INFANTS AND CHILDREN! Children or persons who lack the knowledge or experience to use the product or whose physical, sensory or intellectual capacities are limited must never be allowed to use the product without supervision or instruction by a person responsible for their safety. Please ensure that children cannot play with this product.
• Check the air pressure using the calibrated pressure gauge of the compressed air source.
• EXPLOSION HAZARD! Use this product in well-ventilated areas only. Never use petrol or other flammable liquids to clean the air tool! Sparks could ignite residual vapours inside the compressed air equipment resulting in the compressed air equipment exploding.
• RECOIL! When used under high pressure conditions, recoil can occur which can cause danger due to constant pressurization.
• RISK OF INJURY!
  • Never point the air jet towards yourself or other people, animals or electrical equipment.
  • During maintenance, switch off the compressed air supply.
  • Never exceed the maximum permitted working pressure of 8 bar. Use a pressure reducer to adjust the operating pressure. Switch the product off if you do not use it anymore.
  • First of all, disconnect the tube from the compressed air source and when you have done this, disconnect the supply pipe from the product. Following these instructions will stop the supply pipe from twirling around all over the place.
  • For your own protection, please wear suitable protective clothing.
  • Keep children and other persons away from the equipment during use.
  • Do not use the equipment when tired or under the influence of drugs, alcohol or medications. One moment of carelessness when using the equipment may result in serious injuries. Distractions can cause you to lose control of the product.
  • Before any repair and maintenance work or transport, remove the product from the compressed air source.
  • Before using the product, check it for damage, and especially for light damage or damage to the protective systems. These must be thoroughly checked to confirm that they are indeed completely capable of performing their intended tasks. All product parts must be correctly assembled and comply with all guidelines in order to ensure correct and safe operation.
  • If you ascertain that the product is indeed damaged, you are not permitted to use it.
  • Do not bend the product’s pipe. This could cause damage.
  • Warning! Please observe all manufacturer’s instructions regarding inflatable products.
  • Never remove model numbers. They are safety-relevant parts of the product. If you have no experience of working with this product, please undertake a training course to acquaint yourself with the dangers of embarking on such a venture.
  • Only use the product in dry locations.
  • Never use hydrogen, oxygen, carbon dioxide or any other bottled gas as the source of energy for this product, since this may cause an explosion and lead to serious injury.
  • Use only the accessories and attachments detailed in the operating instructions.
  • Using other types of additional parts can cause danger.

Safety instructions for batteries/rechargeable batteries

• DANGER TO LIFE! Keep batteries/ rechargeable batteries out of reach of children. If accidentally swallowed seek immediate medical attention. Swallowing may lead to burns, perforation of soft tissue and death. Severe burns can occur within 2 hours of ingestion.
• DANGER OF EXPLOSION!
  • Never recharge non-rechargeable batteries. Do not shortcircuit batteries/rechargeable batteries and/or open them. Overheating, fire or bursting can be the result.
  • Never throw batteries/rechargeable batteries into fire or water.
  • Do not exert mechanical loads to batteries/ rechargeable batteries.
• Risk of leakage of batteries/ rechargeable batteries
  • Avoid extreme environmental conditions and temperatures, which could affect batteries/rechargeable batteries, e.g. radiators/direct sunlight.
  • If batteries/rechargeable batteries have leaked, avoid contact with skin, eyes and mucous membranes with the chemicals! Flush immediately the affected areas with fresh water and seek medical attention!
• WEAR PROTECTIVE GLOVES! Leaked or damaged batteries/rechargeable batteries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.
  • In the event of a leakage of batteries/ rechargeable batteries, immediately remove them from the product to prevent damage.
  • Only use the same type of batteries/rechargeable batteries. Do not mix used and new batteries/rechargeable batteries.
  • Remove batteries/rechargeable batteries if the product will not be used for a longer period.

Risk of damage of the product

• Only use the specified type of battery/ rechargeable battery!
• Insert batteries/rechargeable batteries according to polarity marks (+) and (-) on the battery/rechargeable battery and the product.
• Use a dry, lint-free cloth or cotton swab to clean the contacts on the battery/rechargeable battery and in the battery compartment before inserting!
• Remove exhausted batteries/rechargeable batteries from the product immediately.

Start-up

Before first use (see fig. B)

• Remove the battery compartment cover 16 on the rear side of digital manometer 1 . Put the batteries 15 into battery compartment 17 . Check the polarity of the battery is correctly connected.
• Close the battery compartment 17 by replacing the battery compartment cover 16 .

Connecting the compressed air source

• Warning : Never exceed the maximum permitted operating pressure of 8 bar.
• Warning : In order to regulate the pressure, the compressed air source must be fitted with a pressure regulator.
• Connect the product to a suitable compressed air source. Now connect the supply pipe using the quick-release connector to the male air fitting coupler 7 on the inflator 5 .

Using the digital tyre inflator

• Warning
  

  • Inflating bicycle tyres, balls, airbeds, rubber dinghies etc. is a noisy operation. In order to protect hearing, wearing suitable ear protection gear is required. Always wear suitable personal protective gear whenever is applicable by checking the instruction manual of the product to be inflated.
  • Never point the digital inflator at people or animals. Expelling high-pressure air to eyes will cause serious injury.

Digital manometer functionalities (see fig. C)
Note : The function of digital manometer is to monitor the inflation pressure. It is not a calibrated measurement device.

• Rotate the digital manometer 1 360 degrees to read and operate from different angles.
• Press On/Unit/Off button 4 briefly to switch on the digital manometer 1 . When digital manometer 1 is switched on, by pressing On/Unit/Off button 4 for about 5 seconds to switch it off.
• To switch on the back light of LCD display panel 2 by pressing Light/Zero button 3 briefly.
• To switch off the back light of LCD display panel 2 by pressing Light/Zero button 3 briefly.
• When the digital manometer 1 is switched on, press briefly On/Unit/Off button 4 to select measuring unit of bar, kgf/cm2, psi or kPa.
• Press Light/Zero button 3 for about 5 seconds to reset the digital manometer 1 to zero reading.

Note :

• Do not reset digital manometer whilst measuring. Only reset it when inflator is disconnected from bicycle tyre or the item to be inflated.
• Digital manometer has auto-off function. Whenever product stays alone without pressing any functional button for about 30 seconds, it will switch off automatically to save battery energy.

Connecting and removal of adaptor nozzle (see fig. D)

• Press down lock lever 11 of connector 10 .
• While pressing down lock lever 11 , insert adaptor nozzle into the hole of connector 10 in direction a till it is completely reaching the bottom of the hole.
• Then release lock lever 11 .
• To remove the adaptor nozzle by pressing down lock lever 11 and pull out the adaptor nozzle in direction b completely away from the connector 10 .

Inflating an item

• Check LCD display panel 2 reading is set to zero before connecting to item to be inflated.
• Connect to the valve of the item to be inflated securely.
• Press the trigger 8 to process inflation operations. Monitor the pressure reading from LCD display panel 2 .
• Till reaching desired pressure, release trigger 8 to stop inflation.
• Remove the adaptor nozzle from the valve of the item to be inflated.

Regulating pressure
If there is too much air inflated into the item or reaching pressure higher than desired, press down pressure release button 6 to release some of the air to regulate the pressure.

Warning: Always disconnect the inflator from the compressed air source after finishing the work to avoid expelling high pressure air to people or animals by accident that may cause personal injury.

Changing the batteries (see fig. B)
When battery level is low it needs to be replaced by new one. Always replace both batteries.

• Remove the battery compartment cover 16 on the rear side of digital manometer 1 .
• Remove the exhausted batteries 15 from battery compartment 17 .
• Put the new batteries 15 into battery compartment 17 . Check if the polarity of the battery is correctly connected.
• Close the battery compartment 17 by replacing the compartment cover 16 .

Maintenance

DANGER OF INJURY!
Always disconnect the product from the compressed air supply before cleaning it. The product does not require special maintenance.

Cleaning

• Do not use sharp objects to clean the product.
• Do not allow liquids to get inside the product, this can cause damage to it.
• Clean the product regularly. The best time to do so is right after completing works.
• Clean the product housing with a dry cloth.

Storage

• Product needs to be stored according the following conditions.
• Store product dust-free place.
• Do not expose the product to liquids, fire, heat source and/or aggressive substances.
• Do not store the product outdoors.
• Keep the product out of reach of children.
• Ideal storage condition is in temperature range from +10 °C to +30 °C and relative humidity is not more than 60 %.
• If product is not used for a long time, 3 months or more, take out the batteries from the digital manometer and store it separately.

Disposal

• The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
• Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following  meaning: 1–7: plastics/ 20–22: paper and fibreboard/ 80–98: composite materials.
• Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
• To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

The product incl. accessories and packaging materials are recyclable and are subject to extended producer responsibility. Dispose them separately, following the illustrated Info-tri (sorting information), for better waste treatment. The Triman logo is valid in France only. Faulty or used batteries/rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and its amendments. Please return the batteries/rechargeable batteries and/or the product to the available collection points.

Environmental damage through incorrect disposal of the batteries/rechargeable batteries!

Batteries/rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg =  mercury, Pb = lead. That is why you should dispose of used batteries/rechargeable batteries at a local collection point.

Warranty

• The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of material or manufacturing defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.
• The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Keep the original sales receipt in a safe location as this document is required as proof of purchase.
• Any damage or defects already present at the time of purchase must be reported without delay after unpacking the product.
• Should the product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period is not extended as a result of a claim being granted. This also applies to replaced and repaired parts. This warranty becomes void if the product has been damaged, or used or maintained improperly.
• The warranty covers material or manufacturing defects. This warranty does not cover product parts subject to normal wear and tear, thus considered consumables (e.g. batteries, rechargeable batteries, tubes, cartridges), nor damage to fragile parts, e.g. switches or glass parts.

Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions: Please have the till receipt and the item number (IAN 435337_2304) available as proof of purchase. You will find the item number on the rating plate, an engraving on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product. If functional or other defects occur, please contact the service department listed either by telephone or by e-mail. You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the  proof of purchase (till receipt) and informationabout what the defect is and when it occurred.

Service

• Service Great Britain
  • Tel.: 0800 0569216
  • E-Mail: owim@lidl.co.uk
• Service Ireland
  • Tel.: 1800 200736
  • E-Mail: owim@lidl.ie

EU DECLARATION OF CONFORMITY (435337_2304)

• IAN: 435337 2304
• Product identification: “PARKSIDE” Digital Tyre Inflator
• Model Number: HG07820

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

• Directive 2006/42/EC
• Directive 2011/65/EU and all related amendments
• Directive 2014/30/EU
• Directive 2014/35/EU

References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared:

• N° / Parts
• Directive 2006/42/EC
• EN 1953:2013
• Directive 2014/30/EU
• EN 61326-1:2013
• EN IEC 61326-1:2021
• Directive 2014/35/EU
• EN 61010-1:2010

Additional information:

• N° / Parts
• Directive 2011/65/EU
• EN IEC 63000:2018

Keeper of the technical documentation: OWIM GmbH & Co.KG

Signed for and on behalf of  OWIM GmbH & Co. KG, Stiftsbergstraße 1, 74167 Neckarsulm, Germany

This declaration of conformity is issued under the sole responsibility of the manufacturer. Translation of the original Declaration of conformity

• Neckarsulm Place
• 23.08.2023 Date
• ppa. Stefan Haensel Authorised Signatory
• ppa. Jens Buchheim Authorised Signatory

OWIM GmbH & Co. KG

• Stiftsbergstraße 1 74167 Neckarsulm GERMANY
• Model no.: HG07820
• Version: 10/2023

Last Information Update: 08/2023 ·
Ident.-No. : HG07820082023-8

IAN 435337_2304

FAQ

Q: What should I do if the pressure gauge display is not working?
A: Check the battery connection and replace the battery if necessary. If the issue persists, contact customer service for assistance.

Q: Can I use this Digital Tyre Inflator for other inflatable items?
A: The Digital Tyre Inflator is specifically designed for tires and may not be suitable for other inflatable items. It is recommended to refer to the user manual for guidance on compatible uses.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>