Energizer QM5000 Wireless magnetic Portable Charger 5000mAh Power Bank Instruction Manual
- July 26, 2024
- Energizer
Table of Contents
QM5000
Specification:
Model Name : QM5000
Cell Type : Lithium Polymer
Battery Capacity : 5000mAnh/ 18.5Wh(Max.)
Rated Input : USB-C 5V/2.4A
Rated Output : USB-C 5V/3A(Max.)
Wireless Output : 5W/7.5W/10W/15W
Total Output : 15W(Max.)
Dimensions : 94 (L)x64 (W)x18(H) mm
Weight : 126g+10g
Package Contents
HOW to USE
Place the power bank to the back of your smartphone, it will attach magnetically and align automatically.
Press the power button to activate charging on your device.
Blinking white LED light indicates USB-C charging is activated.
Solid white LED light indicates USB-C charging is completed.
Blinking blue LED light indicates foreign object detection, please remove the
object on top of the wireless charger.
Solid blue LED light indicates wireless charging is activated.
For wireless fast charge, please charge one device at a time.
Safety Instruction
- Avoid water, heat, fire, penetration of the battery, and severe crops at all times.
- Do not insert other objects into the USB ports other than the USB connectors.
- Once the product is fully charged, your power pack automatically shuts off to save power. ;
- During charge & recharge, battery may feel slightly warm. ;
- Do not clean the battery with water or other cleaning products, clean the exterior with a lightly wetted cloth or napkin.
- Normally the battery performance will decline after 2 years
- Any intentional and physical damage to the battery will not be under the warranty jons.
- Battery slorage temperature is between -10°C~+60°C , operating temperature is a 5
- Fully charge the battery before first use to maximize the battery life.
- Do not place any metal or flammable object on top of this luct.
Waming: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’ s authority to
operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. is equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
- The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
- Equipment system maintenance is simple, please refer to the manual. .
- The user can take simple measures to correct the interference. Such as staying away from interference sources, turning off interference sources, etc.
Customer Service
For any question about the product, please contact us at
service@energizerpowerbanks.com
©2024 Energizer. Energizer, Energizer Character and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used under license by TennRich International Corp..
How to Recharge
How to pick the right case
Please use compatible magnetic case for optimal results. Do not place any
metal or foreign object on the wireless charging area. Please do not use a
case with thickness over 4mm, or metal ring, or magnetic pad in the middle on
the back of the case.
Connect the charging cable to a universal
USB AC adapter
Adapter NOT included
Warning :
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to he
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC Warning Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by tuming the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device complies with part 18 of the FCC Rules.
Information to the user.
- the device has potential interference,but the interference is very small and meets the requirements of the FCC rule.
- Equipment system maintenance is simple, please refer to the manual.
- The user can take simple measures to correct the interference. Such as staying away from interference sources, turning off interference sources, etc.
RF exposure compliance statement:
The equipment complies with FCC Radiation exposure limit set forth for
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>