Ubiquiti SWXEFG E-Label Instructions

Ubiquiti SWXEFG E-Label

Product Information

Specifications:

• FCC ID: SWX-EFG
• IC ID: 6545A-EFG
• Compliance : FCC Part 15, ISED Canada license-exempt RSS standard(s)
• RF Exposure Warning : Antennas must be installed with a separation distance of at least 20 cm from all persons

Product Usage Instructions

E-Labeling Information:
To access E-label and warning statements:

1. Open the device/controller GUI
2. Navigate to Device > Settings > About

Compliance Information:
For detailed compliance information and Declaration of Conformity, visit: ui.com/compliance

FCC Compliance:
This device complies with Part 15 of the FCC Rules. Ensure the following conditions are met:

1. The device may not cause harmful interference
2. The device must accept any interference received

ISED Canada Compliance:
This device complies with ISED Canada license-exempt RSS standard(s). Ensure the following conditions are met:

1. The device may not cause interference
2. The device must accept any interference received

RF Exposure Warning:
For RF safety, ensure the antennas are installed with a separation distance of at least 20 cm from all persons and not operating with other antennas or transmitters.

• FCC ID: SWX-EFG
• IC ID: 6545A-EFG

1. Ubiquiti Inc. will be incorporating the E-Label procedures per FCC KDB 784748-D02. The information below is what will be included in the E-Labeling.
2. E-label and warning statements can be found in the device/controller GUI under Device > Settings > About.
3. Detailed compliance information including Declaration of Conformity is available at the following internet address: ui.com/compliance

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user bill be required to correct the interference at his own expense.

ISED Canada

• CAN ICES-3 (A) / NMB-3 (A)
  This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter.FAQ

Q: How should I ensure compliance with RF exposure warning?
A: Install the antennas to maintain a separation distance of at least 20 cm from individuals and avoid operating them alongside other antennas or transmitters.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>