SINJI 1023-L Infrared Leg Heater Instruction Manual
- June 16, 2024
- SINJI
Table of Contents
INFRARED LEG HEATER
Manual
SAFETY AND WARNING
- Please read the manual carefully before use.
- Do not cover the product with anything (for example: clothing, a towel or a blanket).
- Do not clean the product with corrosive cleaning agent or harsh chemicals.
- Do not use near pets or infants.
- Children aged 8 and older and individuals with physical, sensory, or mental limitations can use the appliance if supervised or instructed on safe use and aware of potential hazards.
- Do not poke at, or perforate, the product.
- Keep away from fire and do not use it in combination with any other heating device.
- Pull out the power cord when the surface gets wet. Make sure the product, power cord and power plug are dry before use!
- Do not use if the power cord has been damaged.
- Unplug the heater when the product is not in use.
Do not tumble dry Do not iron
Do not dry clean Do not puncture
Do not soak Do not bleach
Do not cover
DESCRIPTION
Enjoy the soothing warmth of the Sinji Infrared (IR) Leg Heater. Whether you need to warm up your legs after a long day, a workout, or a cold night, the infrared leg heater can provide you with gentle and safe heat that penetrates deep into your muscles and joints. You can adjust the temperature and timer settings to suit your needs and preferences. The infrared leg heater can also be folded up and stored away easily when it is not needed.
CONTENTS OF PACKAGING
1x IR Leg Heater
3x Stands
1x Manual
TECHNICAL SPECIFICATIONS
Model | SILH-0108 |
---|---|
Power | 165W (±10%) |
Type of heating | Infrared |
Mounting options | Standing |
Material | 75% neoprene, 25% polyester |
Power cord length | 1.5m |
Power supply | 230V/50Hz |
Tip over protection | Yes (> 45° tilted) |
Overheat protection | Yes |
Timer protection | Shuts off automatically after 3 hours |
Size (Folded) | 40 x 3 x 51 cm |
Size (Unfolded) | 100 x 1 x 51 cm |
USER MANUAL
Table of contents
- How to use
- Maintenance
HOW TO USE
1. Place the stands on the bottom of the heater
2. Place on the floor
- 90° Right side up
- 45° Tip-over protection
- 270° Tip-over protection Upside down
3. Plug the socket into the power outlet
4. Press the power button. All lights will turn on for 2 seconds
5. Adjust the heating level to your liking with the up and down buttons
Note: as a safety feature, the leg heater will switch off automatically after 3 hours
- Heating indicator light
- High heat
- Medium heat
- Low heat
- On/off
- Up
- Down
MAINTENANCE
Unplug the power cord before cleaning the product. Gently wipe with a wet cloth. Don’t use bleach, chlorine or any other harsh cleaning agents and let airdry. Before using it again, make sure it is completely dry.
In accordance with European directives applicable to this product.
To protect our environment and to recycle the raw materials used as completely as possible, the consumer is asked to return unserviceable equipment to the public collection system for electrical and electronic. The symbol of the crossed indicates that this product must be returned to the collection point for electronic waste to feed it by recycling the best possible raw material recycling. By ensuring this product you will prevent possible negative effects on the environment and human health, which could otherwise be caused due to improper disposal of that product. The recycling of materials from this product, you will help to preserve a healthy environment and natural resources.
© 2023, Sinji. All rights reserved.
www.sinjiproducts.com
Made in China