UBIQUITI SWX-U7PRO UniFi Access Point Instructions
- July 30, 2024
- UBIQUITI
Table of Contents
UBIQUITI SWX-U7PRO UniFi Access Point
Product Specifications
- FCC ID: SWX-U7PRO
- IC ID: 6545A-U7PRO
- Compliance: FCC Part 15, ISED Canada license-exempt RSS standard(s)
- Frequency Band: 5.925-7.125 GHz
- RF Exposure Warning: Antennas must have a separation distance of at least 20 cm from all persons
Product Usage Instructions
E-Label Information
To access E-label and warning statements:
- Go to the device/controller GUI.
- Navigate to Device > Settings > About.
Compliance Information
Detailed compliance information, including Declaration of Conformity, can be found at: ui.com/compliance.
FCC Compliance
For FCC compliance, ensure the following:
- Changes or modifications must be approved by the responsible party.
- Operation must adhere to Part 15 of the FCC Rules.
- Device should not cause harmful interference.
- Device must accept any interference received.
- Follow recommendations like reorienting antennas, increasing separation, and consulting experts if needed.
ISED Canada Compliance
When operating in the 5.925-7.125 GHz band under ISED Canada license-exempt RSS standard(s):
- Device should not cause interference.
- Device must accept any interference received.
RF Exposure Warning
To comply with RF Exposure Warning:
- Ensure antennas maintain a separation distance of at least 20 cm from all persons.
- Avoid operating antennas in conjunction with other antennas or transmitters.
FAQs
- Q: Where can I find the E-label and warning statements?
- A: You can access the E-label and warning statements in the device/controller GUI under Device > Settings > About.
- Q: What should I do for FCC compliance?
- A: Follow FCC rules, avoid causing harmful interference, and consult experts for assistance if needed.
- Q: How should I handle RF exposure warnings?
- A: Ensure antennas are installed with a separation distance of at least 20 cm from all persons and avoid operating them with other antennas or transmitters.
E-Label User Information
FCC ID: SWX-U7PRO
IC ID: 6545A-U7PRO
Ubiquiti Inc. will be incorporating the E-Label procedures per FCC KDB
784748-D02. The information below is what will be included in the E-Labeling.
E-label and warning statements can be found in the device/controller GUI under
Device > Settings > About.
Detailed compliance information including Declaration of Conformity is
available at the following internet address: ui.com/compliance
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions.
1. This device may not cause harmful interference, and 2. This device must
accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures;
– Reorient or relocate the receiving antenna. – Increase the separation
between the equipment and receiver. – Connect the equipment into an outlet on
a circuit different from that to which the receiver is connected. – Consult
the dealer or an experienced radio/TV technician for help.
When operating in the 5.925-7.125 GHz band:
· FCC regulations restrict the operation of this device to indoor use only.
· The operation of this device is prohibited on oil platforms, cars, trains,
boats, and aircraft, except that operation of this device is permitted in
large aircraft while flying above 10,000 feet in the 5.925-6.425 GHz band.
· Operation of transmitters in the 5.925-7.125 GHz band is prohibited for
control of or communications with unmanned aircraft systems.
ISED Canada
CAN ICES-3 (A) / NMB-3 (A)
This device complies with ISED Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any
interference received, including interference that may
cause undesired operation.
CAN ICES-3 (A) / NMB-3 (A)
Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes:
1. L’appareil ne doit pas produire de brouillage; 2. I’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
RF Exposure Warning
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be located
or operating in conjunction with any other antenna or transmitter.
Les antennes utilisées pour ce transmetteur doivent être installé en
considérant une distance de séparation de toute personnes d’au moins 20 cm et
ne doivent pas être localisé ou utilize en conflit avec tout autre antenne ou
transmetteur.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>