CyberPower CSB100W 1 Outlet Surge Protector User Manual

: July 25, 2024
: CyberPower

Table of Contents

CyberPower CSB100W 1 Outlet Surge Protector
Product Usage Instructions
FAQ
FEATURES
SPECIFICATIONS
TROUBLESHOOTING
FOR MORE INFORMATION
FCC Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CyberPower CSB100W 1 Outlet Surge Protector

Specifications

Model Number: CSB100W
Outlet: 1 Standard Outlet
Surge Protection: 900 Joules
Electrical Rating: 125V/15A/1875W
UL Clamping Voltage: UL14493rd 800V (H-N, H-G, N-G)
Maximum Peak Current: 45,000A
AC Lines Protected: H-N: 15,000A, H-G: 15,000A, N-G: 15,000A
Response Time: Less than 1 nanosecond
Attenuation: Up to 32dB
EMI/RFI Filtration: 150kHz to 100MHz

Product Usage Instructions

Features

Standard Outlet: Connect your electronic devices to the standard outlet for power.
Protected LED Indicator: The LED indicator lights up when the surge protection feature is working properly.

Caution and Troubleshooting

If the Protected indicator does not light up, it indicates that the surge protector’s AC line is no longer protected from surges. Replace the surge protector in such cases. Additionally, if the surge protector has experienced a power surge or spike beyond its specified limits, it may have overloaded the protection circuitry, rendering it inactive. While the surge protector may have absorbed enough of the surge to protect your connected equipment, it will not safeguard against future surges and spikes.

For More Information and Technical Support

For technical support, visit CyberPowerSystems.com/support or call toll-free at 1-877-297-6937.

Conformance Approvals and Warnings

This device complies with Part 15 of the FCC Rules. It has been tested and found to comply with the limits for a Class B digital device. Any changes or modifications not expressly approved by the responsible party could void the user’s authority to operate the equipment.

FAQ

Q: What should I do if the Protected LED indicator is not illuminated?

A: If the indicator is not lit, it means that the surge protector’s AC line is no longer protected from surges. It is recommended to replace the surge protector in such cases.

Q: Can the surge protector protect against all types of electrical surges?

A: The surge protector is designed to absorb surges up to its\ specified limits. If it has already absorbed a surge beyond its capacity, it may no longer provide full protection against future surges and spikes.

FEATURES

Standard Outlet
Protected LED Indicator Illuminated when the surge protection feature is working properly

SPECIFICATIONS

Model Number: CSB100W
Outlet: 1 Standard Outlet
Surge Protection: 900 Joules
Electrical Rating: 125V/15A/1875W
UL Clamping Voltage: UL 1449 3rd 800V (H-N, H-G, N-G)
Maximum Peak Current: 45,000A
3 AC Lines Protected: H-N: 15,000A,
H-G: 15,000A,
N-G: 15,000A
The maximum surge possible on household wiring is 6,000 volts
Response Time: Less than 1 nanosecond
Attenuation: Up to 32dB
EMI/RFI Filtration: 150 kHz to 100 MHz

WARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK:

Use only in dry locations and only indoors.
DO NOT plug into another relocatable power tap.
DO NOT “daisy chain” surge protectors.
DO NOT use with any aquarium equipment.
DO NOT use if properly grounded outlets are not available.
DO NOT install this device if there is less than 10 meters (30 feet) of wire between \the electrical outlet and electrical service panel.
DO NOT use for medical or life support equipment. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load.

TROUBLESHOOTING

If the Protected indicator does not light, the surge protector’s AC line is no longer protected from surges. Replace the surge protector. The surge protector may have received a power surge or spike beyond its specified limits that might overload the protection circuitry and make it inactive. The surge protector absorbed enough of the surge to protect your connected equipment, but it will not protect against future surges and spikes.

FOR MORE INFORMATION

Visit CyberPowerSystems.com for more information regarding:

Product information and certifications
Product warranty
Connected equipment guarantee

TECHNICAL SUPPORT

Visit: CyberPowerSystems.com/support
Toll-Free: 1-877-297-6937
© 2024 Cyber Power Systems (USA), Inc. All rights reserved.
All other trademarks are the property of their respective owners.

FCC Statement

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipmen

Cyber Power Systems (USA), Inc.